
CandleLightfd S01 3x3
linux-automation/candleLightFD
USB CAN-FD interface based on the STM32G0 that works well with gs_usb on Linux

STM32F0x2 LQFP36 breakout board with CAN transceiver
F0x2-can breakout is an open-source printed circuit board by HubertD, from the HubertD/f0x2-can-breakout repository on GitHub. It is a 2-layer board of 37.3 × 24.3 mm with 27 parts on 35 nets, routed with 411 tracks and 28 vias.
It is built around the TJA1051T/3. Its parts include 12 capacitors, 4 resistors, 4 ICs, 3 connectors and 2 diodes. It belongs with the interfaces and adapters boards and the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitors_SMD:C_0603 | C3, C4, C5, C6, C11, C12 |
| 4 | 10uF | Capacitors_SMD:C_0805 | C7, C8, C9, C10 |
| 2 | 18pF | Capacitors_SMD:C_0603 | C1, C2 |
| 2 | 1K | Resistors_SMD:R_0603 | R2, R3 |
| 2 | CONN_01X14 | Pin_Headers:Pin_Header_Straight_1x14 | P1, P2 |
| 1 | 10K | Resistors_SMD:R_0603 | R1 |
| 1 | 8MHz | Crystals:ABM3 | Y1 |
| 1 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04 | P3 |
| 1 | CON_SWD | tagconnect:TC2030-NL | X1 |
| 1 | MCP1754ST-3302E/MB | TO_SOT_Packages_SMD:SOT89-3_Housing | U2 |
| 1 | MCP1754ST-5002E/MB | TO_SOT_Packages_SMD:SOT89-3_Housing | U3 |
| 1 | STM32F042K6Tx | Housings_QFP:LQFP-32_7x7mm_Pitch0.8mm | U1 |
| 1 | TJA1051T/3 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U4 |
| 1 | dnp | Resistors_SMD:R_0603 | R4 |
| 1 | green | LEDs:LED_0603 | D1 |
| 1 | red | LEDs:LED_0603 | D2 |

linux-automation/candleLightFD
USB CAN-FD interface based on the STM32G0 that works well with gs_usb on Linux

fake-name/cfs-reverse-engineering
Reverse engineering the Creality CFS for use as a general AMU/MMU system


dhruxraj/stm32-can-ecu
A compact, "ECU-style" CAN node for learning and prototyping automotive-type embedded software. It has an STM32G4 MCU, a CAN transceiver with protection and switchable termination, a 6-axis IMU, a protected 8-18 V…

PurkkaKoodari/ktane-hw
Fully playable hardware implementation of Keep Talking and Nobody Explodes. Mirror of https://gitlab.com/PurkkaKoodari/ktane-hw


MrBlahhhh/esp32-shield-can1-can2-kdcan-analogin-sdcard
A carrier board an ESP32-S3-DevKitC-1 plugs into, turning it into a vehicle data logger. The dev board brings the MCU and its power; this board brings everything that has to touch a car.

schto173/FormulaLAM
Racing Team's Exchange for Shell EcoMarathon @Lycée des Arts et Métiers
It measures 37.3 × 24.3 mm and has 2 copper layers, 1.6 mm thick.
27 parts, built around the TJA1051T/3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the HubertD/f0x2-can-breakout repository on GitHub, at the commit this page was made from: the board is f0x2-can-breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask HubertD before reusing the design.