
Coco2
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

This repository contains PCB design files for all projects
LCR meter is an open-source printed circuit board by Hrishikeshkunchepu, from the Hrishikeshkunchepu/PCB-files repository on GitHub. It is a 2-layer board of 102.4 × 83.3 mm with 14 parts on 18 nets, routed with 41 tracks and 0 vias.
It is built around the NE555P. Its parts include 7 capacitors, 3 resistors, 2 ICs, 1 connector and 1 inductor.
Part 1: Sine wave generator PCB using 555 Part 2: Opamp included to convert current to voltage
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10uF | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C5, C6, C7 |
| 1 | 0.01uF | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C3 |
| 1 | 100uH | Inductor_SMD:L_Wuerth_WE-PD-Typ-M-Typ-S_Handsoldering | L1 |
| 1 | 1K | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R3 |
| 1 | CP | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C2 |
| 1 | CP | Capacitor_SMD:C_0201_0603Metric | C1 |
| 1 | CTRIM | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C4 |
| 1 | Conn_01x10_Male | Connector_Wuerth:Wuerth_WR-WTB_64801011622_1x10_P1.50mm_Vertical | J1 |
| 1 | L78L10_TO92 | Package_TO_SOT_THT:TO-92_Inline | U2 |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | RTRIM | Potentiometer_THT:Potentiometer_ACP_CA14V-15_Vertical | R2 |
| 1 | RTRIM | Potentiometer_THT:Potentiometer_ACP_CA14-H5_Horizontal | R1 |

baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.

DarcyJProjects/touchtone555
An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus



benjiaomodular/SynthCard
I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

fortinsylvain/MyCpu
Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

hackup/C128Diag
Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.
It measures 102.4 × 83.3 mm and has 2 copper layers, 1.6 mm thick.
14 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Hrishikeshkunchepu/PCB-files repository on GitHub, at the commit this page was made from: the board is LCR_meter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Hrishikeshkunchepu before reusing the design.