

Bakeneko40
40% verison of the bakenkeo40 keyboard by kkatano.
- Size
- 266.7 × 77.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 116
- Nets
- 83
- Pads
- 433
- Tracks, vias
- 891, 25
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Jun 2021
- Updated
- 22 Mar 2023
Overview
Bakeneko40 is an open-source printed circuit board by HorseyMask, from the HorseyMask/bakeneko40 repository on GitHub, published under the MIT licence. It is a 2-layer board of 266.7 × 77.5 mm with 116 parts on 83 nets, routed with 891 tracks and 25 vias.
It is built around the ATMEGA32U2-AU and SRV05-4. Its parts include 49 diodes, 7 capacitors, 4 resistors, 2 ICs and 2 connectors. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA32U2-AU
TQFP-32(7x7)-40℃~+85℃ 16MHz 1KB 1KB 2.7V~5.5V 22 32KB 8 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)SRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
README
README.mdbakeneko40
On Hold / WIP. Nothing here works (probably), please don't actually try to make this
Do have interest in working on this again, but still consider this on hold until further work is done.
40% verison of the bakenkeo40 keyboard by kkatano.
PCB is still in testing and unconfirmed to work, but otherwise project is mostly done.
Case is a bit too big for plate and pcb. Either edit case or use foam between pcb and plate to allow more room for oring.
Parts
116| Qty | Value | Footprint | References |
|---|---|---|---|
| 49 | SOD-123 | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +33 |
| 37 | MX-NoLED | MX_Only:MXOnly-1U-NoLED | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23, MX24 +21 |
| 6 | MX-NoLED | MX_Only:MXOnly-1.25U-NoLED | MX15, MX39, MX41, MX43, MX46, MX48 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R4 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C6, C7 |
| 2 | MX-NoLED | MX_Only:MXOnly-1.75U-NoLED | MX27, MX28 |
| 2 | MX-NoLED | MX_Only:MXOnly-1.5U-NoLED | MX42, MX47 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | ATmega32U2-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | AVR-ISP-6 | random-keyboard-parts:Reset_Pretty-Mask | J2 |
| 1 | JST SH 4-pin | random-keyboard-parts:JST-SR-4 | J1 |
| 1 | MX-NoLED | MX_Only:MXOnly-2.25U-ReversedStabilizers-NoLED | MX44 |
| 1 | MX-NoLED | MX_Only:MXOnly-2.75U-ReversedStabilizers-NoLED | MX45 |
| 1 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | SW_Push | random-keyboard-parts:SKQG-1155865 | SW1 |
Similar boards
- 2 layers194.3 × 79 mm

- 2 layers190.5 × 83.2 mm

Endeavour-2
ScatteredDrifter/Endeavour
An 38 key orthogonal Keyboard with 3d printable case
111 parts13CERN-OHL-P-2.0 - 2 layers229 × 80 mm

- 2 layers259 × 88.3 mm

- 2 layers242.9 × 89.3 mm

40-m0110
Aeonstrife/40-m0110
An OpenSource 40% PCB compatible with Ani's 40-m0110 case. Made for the Indian Mechanical Keyboard Community.
117 parts1 - 2 layers295.3 × 98.3 mm

- 2 layers168 × 109.2 mm

- 2 layers57.2 × 38.9 mm

Cookpad pad
cookpad/cookpad-pad
Cookpad Pad — A six keys macro pad made by Cookpad.
32 parts76Apache-2.0
Questions
How big is the Bakeneko40 PCB?
It measures 266.7 × 77.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bakeneko40 use?
116 parts, built around the ATMEGA32U2-AU and SRV05-4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bakeneko40 KiCad files?
From the HorseyMask/bakeneko40 repository on GitHub, at the commit this page was made from: the board is pcb/qfp/bakeneko40.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bakeneko40 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).