

40-m0110
An OpenSource 40% PCB compatible with Ani's 40-m0110 case. Made for the Indian Mechanical Keyboard Community.
- Size
- 242.9 × 89.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 117
- Nets
- 81
- Pads
- 440
- Tracks, vias
- 627, 15
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 25 Feb 2023
- Updated
- 3 Jun 2023
Overview
40-m0110 is an open-source printed circuit board by Aeonstrife, from the Aeonstrife/40-m0110 repository on GitHub. It is a 2-layer board of 242.9 × 89.3 mm with 117 parts on 81 nets, routed with 627 tracks and 15 vias.
It is built around the ATMEGA32U2-AU and SRV05-4. Its parts include 47 diodes, 7 capacitors, 4 resistors, 2 ICs and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA32U2-AU
TQFP-32(7x7)-40℃~+85℃ 16MHz 1KB 1KB 2.7V~5.5V 22 32KB 8 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)SRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
README
README.md40-m0110 PCB
An OpenSource 40% PCB compatible with Ani's 40-m0110 case.
Made for the Indian Mechanical Keyboard Community.

Layouts Supported

Firmware
Building the firmware
Copy the folder "40m0110" from the firmware folder to your qmk_firmware/buildakb folder
Launch QMK MSYS and run: qmk compile -kb buildakb\40m0110 -km via
The firmware file will be created in qmk_firmware/.build folder
Flashing the firmware
Launch QMK Toolbox, Select MCU as ATmega32U2, select the firmware file and enable Auto-Flash checkbox.
Press the reset button on the PCB to put the PCB in Bootloader mode.
Parts
117| Qty | Value | Footprint | References |
|---|---|---|---|
| 47 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +31 |
| 34 | MX-NoLED | MX_Only:MXOnly-1U-NoLED | MX1, MX2, MX10, MX11, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23, MX27, MX29 +18 |
| 8 | MX-NoLED | MX_Only:MXOnly-1.25U-NoLED | MX13, MX26, MX28, MX42, MX44, MX46, MX48, MX49 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C6, C7 |
| 2 | MX-NoLED | MX_Only:MXOnly-1.75U-NoLED | MX12, MX25 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C5 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 500mA | Fuse:Fuse_0805_2012Metric | F1 |
| 1 | ATmega32U2-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Conn_01x04_Socket | acheron_Connectors:SM04B-SRSS-TB(LF)(SN)_mounting-reliefs | J1 |
| 1 | Crystal_GND24_Small | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | LOGO | locallib:maekkworks_logo | |
| 1 | MX-NoLED | MX_Only:MXOnly-2U-ReversedStabilizers-NoLED | MX38 |
| 1 | MX-NoLED | MX_Only:MXOnly-6.25U-ReversedStabilizers-NoLED | MX36 |
| 1 | MX-NoLED | MX_Only:MXOnly-2.25U-ReversedStabilizers-NoLED | MX34 |
| 1 | MX-NoLED | MX_Only:MXOnly-1.5U-NoLED | MX24 |
| 1 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
Similar boards
- 2 layers194.3 × 79 mm

- 2 layers190.5 × 83.2 mm

Endeavour-2
ScatteredDrifter/Endeavour
An 38 key orthogonal Keyboard with 3d printable case
111 parts13CERN-OHL-P-2.0 - 2 layers229 × 80 mm

- 2 layers259 × 88.3 mm

- 2 layers266.7 × 77.5 mm

- 2 layers295.3 × 98.3 mm

- 2 layers168 × 109.2 mm

- 2 layers57.2 × 38.9 mm

Cookpad pad
cookpad/cookpad-pad
Cookpad Pad — A six keys macro pad made by Cookpad.
32 parts76Apache-2.0
Questions
How big is the 40-m0110 PCB?
It measures 242.9 × 89.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 40-m0110 use?
117 parts, built around the ATMEGA32U2-AU and SRV05-4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 40-m0110 KiCad files?
From the Aeonstrife/40-m0110 repository on GitHub, at the commit this page was made from: the board is 40-m0110.kicad_pcb and its schematic 40-m0110.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 40-m0110 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Aeonstrife before reusing the design.