
Haptic controller copy
rrzhang139/haptic-controller-pcb
Haptic motor controller PCB — ESP32-S3 + 8x DRV2605L + TCA9548A I2C mux

A replica of an M-Train LED system map using the ESP32.
MTR LED System Map is an open-source printed circuit board by Hong-Kong-Public-Transport, from the Hong-Kong-Public-Transport/MTR-LED-System-Map repository on GitHub. It is a 2-layer board of 485.4 × 48.3 mm with 1,053 parts on 884 nets, routed with 4,390 tracks and 815 vias.
It is built around the ESP32-S3-WROOM-1-N8, 74HC595 and AP2112K-3.3, with the AO3400A among its other parts. Its parts include 628 resistors, 192 transistors, 30 capacitors, 26 ICs and 1 connector. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 234 | 220R | Resistor_SMD:R_0603_1608Metric | R1, R10, R11, R100, R101, R102, R103, R104, R105, R106, R107, R108, R109, R110, R111, R112 +218 |
| 195 | 10k | Resistor_SMD:R_0603_1608Metric | R219, R223, R229, R246, R248, R250, R252, R254, R256, R258, R260, R262, R264, R266, R268, R270 +179 |
| 192 | 100R | Resistor_SMD:R_0603_1608Metric | R245, R247, R249, R251, R253, R255, R257, R259, R261, R263, R265, R267, R269, R271, R273, R275 +176 |
| 192 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q10, Q11, Q100, Q101, Q102, Q103, Q104, Q105, Q106, Q107, Q108, Q109, Q110, Q111, Q112 +176 |
| 109 | GREEN | LED_SMD:LED_0805_2012Metric | D_DOOR_G1, D_ISL_ADM_CEN1, D_ISL_ADM_WAC1, D_ISL_CAB_TIH1, D_ISL_CAB_WAC1, D_ISL_CEN_ADM1, D_ISL_CEN_SHW1, D_ISL_CHW_HFC1, D_ISL_FOH_NOP1, D_ISL_FOH_TIH1, D_ISL_HFC_CHW1, D_ISL_HFC_SKW1, D_ISL_HKU_KET1, D_ISL_HKU_SYP1, D_ISL_KET_HKU1, D_ISL_NOP_FOH1 +93 |
| 58 | RED_YELLOW | LED_SMD:LED_Kingbright_APHBM2012_2x1.25mm | D_ISL_ADM1, D_ISL_CEN1, D_ISL_CHW1, D_ISL_CWB1, D_ISL_FOH1, D_ISL_HFC1, D_ISL_HKU1, D_ISL_KET1, D_ISL_NOP1, D_ISL_QUB1, D_ISL_SHW1, D_ISL_SKW1, D_ISL_SWH1, D_ISL_SYP1, D_ISL_TAK1, D_ISL_TIH1 +42 |
| 26 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24 +10 |
| 24 | 74HC595 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U10, U11, U12, U13, U14, U15, U16, U17, U18, U19, U20, U21, U22, U23, U24, U25 +8 |
| 9 | YELLOW | LED_SMD:LED_0805_2012Metric | D_DOOR_Y1, D_TCL_HOK1, D_TCL_KOW1, D_TCL_LAK1, D_TCL_NAC1, D_TCL_OLY1, D_TCL_SUN1, D_TCL_TSY1, D_TCL_TUC1 |
| 3 | 33R | Resistor_SMD:R_0603_1608Metric | R220, R221, R222 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric | R199, R200 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R183, R184 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J1 |

rrzhang139/haptic-controller-pcb
Haptic motor controller PCB — ESP32-S3 + 8x DRV2605L + TCA9548A I2C mux

akashh218/ESP32-CAM-Devlopment-board
Custom 4-layer ESP32-S3 camera development board designed in KiCad, featuring camera and microSD interfaces, dual USB-C connectivity, UART programming, GPIO expansion, power management, and RF-aware PCB layout.


MAIK97MAX/mini-climate-control
A miniature climate control unit which is remotely controlled

md-sazzad-eee/ATLAS
Modular multi-robot system: a carrier robot that docks, transports, charges and redeploys two small agent robots. KiCad, FreeCAD, MATLAB/Simulink, COMSOL and ESP32 firmware.

MohamadAminGhanoum/Smart-room-V2
I have since around 1 year done a smart room, where i made a custom pcb, and salvaged some parts from an old laptop motherboard to be able to control the LED strip that i have and also open and close my curtain, but…

neilgibsonpinto-art/litewing-65-flight-controller
An ultra-low SWaP-C (Size, Weight, Power, and Cost) monolithic flight computer and decentralized micro-UAV swarm reconnaissance architecture engineered by Neil Gibson Pinto at Sahyadri College of Engineering &…

It measures 485.4 × 48.3 mm and has 2 copper layers, 1.6 mm thick.
1,053 parts, built around the ESP32-S3-WROOM-1-N8, 74HC595, AP2112K-3.3 and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Hong-Kong-Public-Transport/MTR-LED-System-Map repository on GitHub, at the commit this page was made from: the board is pcb/mtr_led_system_map.kicad_pcb and its schematic pcb/led_driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Hong-Kong-Public-Transport before reusing the design.