
ProPrj ch32 tapioca probe mini 2026-09-03
pierrejay/ch32-tapioca-probe
CMSIS-DAP SWD/JTAG & WCH-Link RVSWIO/RVSWD debug probe implementation for CH32X035 (PIOC)

A PCB business card
Pcb card is an open-source printed circuit board by Haxintosh, from the Haxintosh/pcb-card repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 72.4 × 41.2 mm with 141 parts on 47 nets, routed with 754 tracks and 175 vias.
It is built around the CH32X035F8U6, LIS3DH and TS-1187A-B-A-B, with the CR2032 among its other parts. Its parts include 100 diodes, 18 resistors, 5 capacitors, 3 ICs and 2 connectors. It belongs with the RISC-V boards of this library.
A PCB business card
| Qty | Value | Footprint | References |
|---|---|---|---|
| 100 | LED | custom_led:LED_0603_1608Metric | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D100 +84 |
| 14 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4, R5, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R3, R6, R7 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C2, C5 |
| 2 | TS-1187A-B-A-B | easyeda2kicad:SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | SW1, SW2 |
| 1 | CH32V003FxUx | Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm | U1 |
| 1 | CH32X035F8U6_C42442062 | Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm | U3 |
| 1 | CR2032 | easyeda2kicad:BAT-TH_CR2032-BS-6-1 | BT1 |
| 1 | G*** | kibuzzard-6A21B803 | kibuzzard-6A21B803 |
| 1 | G*** | kibuzzard-6A302872 | kibuzzard-6A302872 |
| 1 | G*** | kibuzzard-6A21B8D0 | kibuzzard-6A21B8D0 |
| 1 | G*** | kibuzzard-6A30280D | kibuzzard-6A30280D |
| 1 | LIS3DH | Package_LGA:LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y | U2 |
| 1 | SCL | TestPoint:TestPoint_Pad_D2.0mm | TP1 |
| 1 | SDA | TestPoint:TestPoint_Pad_D2.0mm | TP2 |
| 1 | SOICbite | easyeda2kicad:SOIC_clipProgSmall | J2 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | UART | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
The 138 most common of 141 parts.

pierrejay/ch32-tapioca-probe
CMSIS-DAP SWD/JTAG & WCH-Link RVSWIO/RVSWD debug probe implementation for CH32X035 (PIOC)


ma-ale/usbc_soldering_iron
synched from https://git.alemauri.eu/alema/usbc_soldering_iron





It measures 72.4 × 41.2 mm and has 2 copper layers, 1.6 mm thick.
141 parts, built around the CH32X035F8U6, LIS3DH, TS-1187A-B-A-B and CR2032. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Haxintosh/pcb-card repository on GitHub, at the commit this page was made from: the board is src/pcb_card.kicad_pcb and its schematic src/led_matrix.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).