Skip to the content
2 layers19.2 × 34 mmControllino can, the printed circuit board in 3D

CAN interface for the Controllino-MEGA

Size
19.2 × 34 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
43
Pads
76
Tracks, vias
108, 5
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
30 Oct 2023
Updated
26 Nov 2023

Overview

Controllino can is an open-source printed circuit board by HarveyBates, from the HarveyBates/controllino-can repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 19.2 × 34 mm with 16 parts on 43 nets, routed with 108 tracks and 5 vias.

It is built around the TBL002A-350-04GR-2OR. Its parts include 3 resistors, 2 capacitors, 2 ICs, 2 connectors and 1 diode. It belongs with the interfaces and adapters boards of this library.

Main components

1

README

README.md

Controllino-CAN

Small PCB that fits onto the header of a Controllino-MEGA allowing it to interface with CAN devices through SPI. Does not take up any output/input pins!

Example Code

Utilises the MCP2515 arduino library. See futher information in the examples folder.

cpp
#include <Controllino.h>
#include "mcp2515.h"

#define BIT_RATE CAN_500KBPS
#define NODE_ID 0x0A // Node-ID = 10
#define FUNCTION_CODE 0x180 // CANopen PDO1_TX

// Setup MCP2515 lib with SPI chip-select pin
MCP2515 can(CONTROLLINO_PIN_HEADER_SS);

void setup() {
  Serial.begin(115200);
  Controllino_RTC_init();
  can.reset();
  can.setBitrate(BIT_RATE, MCP_8MHZ);
  can.setNormalMode();
}

void loop() {
  can_frame frame{};
  frame.can_dlc = 8;
  frame.can_id = FUNCTION_CODE | NODE_ID;
  if (can.sendMessage(&frame) == MCP2515::ERROR_OK) {
    Serial.println("TX");

BOM

The bill-of-materials can be found here. The componets only cost $12 AUD ($8 USD).

PCB ordering

Compress the gerber folder and upload to your PCB manufactuer of choice (e.g. jlcpcb or PCBway etc.). As the components are SMD (0805 smallest size) get a stencil (top-side of PCB only) to make assembly easier. PCB plus stencil is roughly $15 AUD ($10 USD).

Licence

Controllino-CAN is licenced under the GNU General Public Licence v3.0 as outlined in the LICENCE.

Parts

16
QtyValueFootprintReferences
222pFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC8, C9
110KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4
1120Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
1330Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR6
18 MHzcrystals:ECS-80-12-33-JGN-TRY2
1Conn_02x13_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x13_P2.54mm_VerticalJ2
1G***kibuzzard-653F0498kibuzzard-653F0498
1G***kibuzzard-653F0443kibuzzard-653F0443
1G***kibuzzard-653F042Bkibuzzard-653F042B
1G***kibuzzard-653F047Fkibuzzard-653F047F
1LEDLED_SMD:LED_0805_2012MetricD3
1MCP2515-xSTPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU1
1MCP2562-E-SNPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1
1TBL002A-350-04GR-2ORwire_to_board:TBL002A-350-04GR-2ORJ5

Similar boards

  • 2 layers140.5 × 30 mmType e, the printed circuit board in 3D

    Type e

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    16 parts3kApache-2.0
  • 2 layers41.4 × 14.5 mmU2f zero, the printed circuit board in 3D

    U2f zero

    conorpp/u2f-zero

    U2F USB token optimized for physical security, affordability, and style

    16 parts2.4k
  • 2 layers122 × 37 mmV0-UmbilicalBoard, the printed circuit board in 3D

    V0-UmbilicalBoard

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    16 parts1.1kGPL-3.0
  • 2 layers152 × 57.6 mmVideoslotadapter, the printed circuit board in 3D

    Videoslotadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    16 parts1kGPL-3.0
  • 2 layers36 × 63.4 mmSmart ringfinal layout, the printed circuit board in 3D

    Smart ringfinal layout

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    16 parts915
  • 2 layers60 × 40 mmHASwitchPlate, the printed circuit board in 3D

    HASwitchPlate

    aderusha/HASwitchPlate

    LCD touchscreen for Home Automation

    16 parts738MIT
  • 2 layers21.1 × 26.9 mmDemo, the printed circuit board in 3D

    Demo

    easyw/kicadStepUpMod

    kicadStepUp: ECAD to MCAD FreeCAD WorkBench

    16 parts704

Questions

How big is the Controllino can PCB?

It measures 19.2 × 34 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Controllino can use?

16 parts, built around the TBL002A-350-04GR-2OR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Controllino can KiCad files?

From the HarveyBates/controllino-can repository on GitHub, at the commit this page was made from: the board is electronics/controllino-can.kicad_pcb and its schematic electronics/controllino-can.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Controllino can design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).