
Tagger
northernpaws/lasernet-rev1
Retrofit Zigbee PCBs, firmware, and a custom Linux-based game controller for the lasertag.net Falcon system.

a Project in which i Design a PCB for a STM32 based Smartwatch and eventually Programm it with FreeRTOS
Smartwatch is an open-source printed circuit board by Haron123, from the Haron123/stm32_smartwatch repository on GitHub. It is a 4-layer board with 43 parts on 48 nets, routed with 486 tracks and 101 vias.
It is built around the W25Q128JVPIQ, LSM6DS3 and TP4056, with the USBLC6-2SC6 among its other parts. Its parts include 16 capacitors, 8 resistors, 7 ICs, 5 connectors and 2 diodes. It belongs with the wearables boards and the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nf | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C8, C9, C10, C14, C15, C16 |
| 4 | 4.7uf | Capacitor_SMD:C_0603_1608Metric | C1, C11, C12, C13 |
| 3 | 4.7k | Resistor_SMD:R_0805_2012Metric | R5, R6, R10 |
| 2 | 1R | Resistor_SMD:R_0805_2012Metric | R2, R4 |
| 2 | 9pf | Capacitor_SMD:C_0603_1608Metric | C6, C7 |
| 2 | D | Diode_SMD:D_0603_1608Metric | D1, D2 |
| 1 | |||
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 15k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 20Mhz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | X2 |
| 1 | Battery input | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x15 | MyButtons:FPC-SMD_15P-P0.50_KH-FG0.5-H2.0-15P-SMT | J3 |
| 1 | INA3221 | Package_DFN_QFN:Texas_RGV0016A_VQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm | U6 |
| 1 | LSE 32khz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | LSM6DS3 | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U2 |
| 1 | LT1761-3.3 | Package_TO_SOT_SMD:TSOT-23-5 | U5 |
| 1 | STM32L432KBUx | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U1 |
| 1 | SW_SPDT | MyButtons:MSK12CO2 | SW1 |
| 1 | Serial wire/Charging | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | TP4056 | Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP2.5x3mm_Mask1.73x2.36mm | U4 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U8 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10118194_Horizontal | J5 |
| 1 | W25Q128JVPIQ | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U3 |
| 1 | [Jumper] | Resistor_SMD:R_0805_2012Metric | R7 |
The 42 most common of 43 parts.

northernpaws/lasernet-rev1
Retrofit Zigbee PCBs, firmware, and a custom Linux-based game controller for the lasertag.net Falcon system.

sequoia-hope/dancing-forest-pcb
The PCB design for the Dancing Forest art project






43 parts, built around the W25Q128JVPIQ, LSM6DS3, TP4056 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Haron123/stm32_smartwatch repository on GitHub, at the commit this page was made from: the board is PCB/smartwatch.kicad_pcb and its schematic PCB/smartwatch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Haron123 before reusing the design.