2 layers

Cubecast

Copper layers: 2
Thickness: 1.6 mm
Parts: 15
Nets: 10
Pads: 82
Tracks, vias: 0, 0
Routed: Not yet
KiCad: KiCad 4
Created: 8 Aug 2015
Updated: 11 Aug 2015

Overview

Cubecast is an open-source printed circuit board by HackBo, from the HackBo/cubecast repository on GitHub. It is a 2-layer board with 15 parts on 10 nets.

It is built around the TPS62200DBV and BQ24040_45. Its parts include 10 capacitors, 3 ICs and 1 resistor. It belongs with the ESP8266 boards of this library.

Main components

README

README.md

cubecast

Category and platform

ESP8266

Project files

Show this board on your page

https://pcbkit.io/boards/HackBo/cubecast

The board's own page, for a message or a post.

Source

Repository: HackBo/cubecast
Board file: pcb/cubecast.kicad_pcb
Commit: 23354f1
Licence: Not stated

Parts

Qty	Value	Footprint	References
4	0.1uF	Capacitors_SMD:C_0402	C7, C8, C9, C10
2	1.0uF	Capacitors_SMD:C_0402	C1, C2
2	10uF	Capacitors_SMD:C_0603_HandSoldering	C5, C6
2	2.2uF	Capacitors_SMD:C_0402	C3, C4
1	390k	Resistors_SMD:R_0402	R1
1	ESP-07v2	ESP8266:ESP-07v2	U3
1	OLED_0.66_inch_64x48	OLED:OLED_0.66_inch_64x48	OLED1
1	bq24040	SMD:R-PWSON-N10	U1
1	tps62200	TO_SOT_Packages_SMD:SOT-23-5	U2

Similar boards

2 layers82 × 38.5 mm
LabMouse
dzervas/labMouse

29 parts1
2 layers78.7 × 58.4 mm
Final schematic
NuhaAdams/UCT-EEE3088F-2025-PCB-DESIGN
EEE3088F-MicroMouse Power Subsystem-Group55
77 parts
4 layers50 × 50 mm
HKIA Tracker
TopQuark12/HKIA_Tracker_HW

87 parts
2 layers52.8 × 17.8 mm
Charger Prototype
ane109/nRF52840-Dongle_Charger_Prototype
Li-Ion test circuitry for an nRF52830-Dongle board
27 parts
2 layers155 × 18 mm
Ruler
chez-d/ruler-osh
OSH version of my personal PCB ruler
123 partsMIT
4 layers60 × 80 mm
Portable assetTracker v0.2
ericyuanyong/asset-tracker
a asset tracker demo project based on msom
160 partsMIT
2 layers38.1 × 25.4 mm
6lp
tessel/6LoWPAN-target
[UNMAINTAINED] Kicad design files for a 6LoWPAN board.
58 parts
4 layers96.8 × 51 mm
Pocketmuseum edu v0
radutolontan/BASM_Pocket_Museum
The Pocket Lab is the next-generation approach to science education. Designed by the Bucharest Applied STEAM Museum, it brings scientific exploration into anyone's hands.
114 parts1

Questions

What parts does the Cubecast use?

15 parts, built around the TPS62200DBV and BQ24040_45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Cubecast KiCad files?

From the HackBo/cubecast repository on GitHub, at the commit this page was made from: the board is pcb/cubecast.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Cubecast design in my own project?

Its repository states no licence, so its author keeps all rights: ask HackBo before reusing the design.