
8088-FE2010A SBC
skiselev/micro_8088
Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset

Custom H-Bridge PCB designed for my club's electrical car. I drew the schematic, designed the PCB, and routed the board in KiCad
H Bridge Schematic is an open-source printed circuit board by Habiba08o, from the Habiba08o/H-Bridge-Custom-PCB repository on GitHub. It is a 2-layer board of 63 × 102 mm with 26 parts on 52 nets, routed with 114 tracks and 0 vias.
It is built around the PN2222A. Its parts include 8 resistors, 8 transistors, 4 diodes, 2 connectors and 2 switches. It belongs with the interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3, R4, R5 |
| 4 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R6, R7, R8 |
| 4 | D | Diode_THT:D_DO-35_SOD27_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 4 | PN2222A | Package_TO_SOT_THT:TO-92_Wide | Q5, Q6, Q7, Q8 |
| 2 | Q_NMOS_GDS | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2 |
| 2 | Q_PMOS_GDS | Package_TO_SOT_THT:TO-220-3_Vertical | Q3, Q4 |
| 2 | SW_SPDT | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1, SW2 |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1, J2 |
| 1 | R_Potentiometer_US | Potentiometer_THT:Potentiometer_Piher_PC-16_Single_Horizontal | RV1 |
| 1 | YAAJ_BluePill | BluePill:YAAJ_BluePill_1 | U1 |

skiselev/micro_8088
Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset

Staacks/there.oughta.be
Projects featured on my blog at https://there.oughta.be


plusvic/simplebus2-intercom
General description of the Simplebus2 protocol used by some Comelit's intercoms. Hardware for retransmitting Simplebus2 messages over UART.




It measures 63 × 102 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Habiba08o/H-Bridge-Custom-PCB repository on GitHub, at the commit this page was made from: the board is H_Bridge_Schematic.kicad_pcb and its schematic H_Bridge_Schematic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Habiba08o before reusing the design.