

Speed controller
The complete files to construct your own zevallos greenpower car
- Size
- 100 × 100 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 89
- Nets
- 64
- Pads
- 439
- Tracks, vias
- 2,023, 40
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 21 Jun 2024
- Updated
- 31 Aug 2024
Overview
Speed controller is an open-source printed circuit board by Gregor-Davies, from the Gregor-Davies/Zevallos repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 100 × 100 mm with 89 parts on 64 nets, routed with 2,023 tracks and 40 vias.
It is built around the TSR 1-2450, IR2111 and IRLZ34N, with the ADS1115 and L7812 among its other parts. It belongs with the RP2040 boards of this library.
Main components
5TSR 1-2450
SIP,11.6x7.5mm-40℃~+85℃ 10.2mm 11.6mm 1A 2200uF 300uA 50mVp-p 5V 7.5mm 7V~36V 850kHz 94% Short Circuit Protection、Automatic fault recovery ±1% SIP,11.6x7.5mm DC-DC Power Modules ROHSYLPTECDC-DC Power ModulesIR2111
DIP-8DIP-8 Gate Drivers ROHSInfineon TechnologiesGate DriversIRLZ34N
TO-22055V 30A N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorisedADS1115
UncategorisedTexas InstrumentsL7812
TO-220ST0℃~+125℃@(Tj) 1 1.2A 12V 2V@(1A) 30V 71dB@(120Hz) 76uV Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
electronics/readme.mdAll the electronics and production files for the project.
Parts
89| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | Switch ADC | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | Switch ADC, Switch ADC, Switch ADC, Switch ADC, Switch ADC, Switch ADC, Switch ADC |
| 6 | Mount_Pad | MountingHole:MountingHole_4.3mm_M4_Pad_Via | M4, M4, M4, M4, M4, M4 |
| 5 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 10k, 10K, 10K, 10K, 10K |
| 5 | 47R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 47R, 47R, 47R, 47R, 47R |
| 5 | IRLZ34N | Package_TO_SOT_THT:TO-220-3_Vertical | IRLZ34N, IRLZ34N, IRLZ34N, IRLZ34N, IRLZ34N |
| 4 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 10k, 10k, 10K, 10K |
| 4 | 1u | Capacitor_THT:CP_Radial_D10.0mm_P2.50mm | 1uF, 1uF, 1uF, 1uF |
| 4 | 2N7000 | Package_TO_SOT_THT:TO-92_Inline | 2N7000, 2N7000, 2N7000, 2N7000 |
| 3 | 100n | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | 100nF, 100nF, 100nF |
| 2 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | 1N4007, 1N4007 |
| 2 | 4.7K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 4.7K, 4.7K |
| 2 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 4.7K, 4.7K |
| 2 | 470u | Capacitor_THT:CP_Radial_D13.0mm_P2.50mm | 470uF, 470uF |
| 2 | 5A | Symbol:XF-506P | 5A, 5A |
| 2 | 680R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 680R, 680R |
| 2 | 80.6k | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P20.32mm_Horizontal | 80.6k, 80.6k |
| 1 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | 10uF |
| 1 | 12v | TestPoint:TestPoint_Pad_1.0x1.0mm | 12V TP |
| 1 | 2.2m | Capacitor_THT:CP_Radial_D18.0mm_P7.50mm | 2.2mF |
| 1 | 3V3 I2C | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | 3V3 I2C |
| 1 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 47K |
| 1 | 510R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 510R |
| 1 | 5V I2c | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | 5V I2C |
| 1 | ACS758 | Sensor_Current:Allegro_CB_PFF | ACS758 |
| 1 | ADS1115 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | 01x10 |
| 1 | BAT GND | TerminalBlock_Wuerth:7461001_REDCUBE | Bat GND |
| 1 | Bat 24 | TerminalBlock_Wuerth:7461001_REDCUBE | Bat + |
| 1 | External Con | Connector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_Vertical | 02x13 |
| 1 | FAN | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Vertical | 02x01 |
| 1 | IR2111 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | IR2111 |
| 1 | L7812 | Package_TO_SOT_THT:TO-220-3_Vertical | L7812 |
| 1 | LED | LED_THT:LED_D5.0mm | LED |
| 1 | LOGO | Symbol:motor + | G*** |
| 1 | LOGO | Symbol:battery + v3 | G*** |
| 1 | LOGO | Symbol:battery - v2 | G*** |
| 1 | LOGO | Symbol:motor - | G*** |
| 1 | LOGO | Symbol:zev 3 | G*** |
| 1 | MOTOR +VE | TerminalBlock_Wuerth:7461001_REDCUBE | Motor + |
| 1 | MOTOR -VE | TerminalBlock_Wuerth:7461001_REDCUBE | Motor - |
| 1 | Mode | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | Mode |
| 1 | PWMTP | TestPoint:TestPoint_Pad_1.0x1.0mm | PWM |
| 1 | PWMTPMF | TestPoint:TestPoint_Pad_1.0x1.0mm | PWM |
| 1 | RaspberryPi_Pico_W | Module_RaspberryPi_Pico:RaspberryPi_Pico_Common_MountingHoles | RPI PICO W |
| 1 | SD | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | SD Addon |
| 1 | TSR_1-2450 | Converter_DCDC:Converter_DCDC_TRACO_TSR-1_THT | TSR |
| 1 | TVBVS | TestPoint:TestPoint_Pad_1.0x1.0mm | TVBVS |
| 1 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | C TP |
| 1 | Throttle | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | Throttle |
Similar boards
- 2 layers119.1 × 121 mm

- 2 layers100 × 80 mm

Pwm
Seba-SL/TP-TA138-G7
Diseño eficiente de una fuente de tensión conmutada de 5V a partir de la tensión de una batería. Alimentación estable a cargas como microprocesadores, sensores y transceptores de comunicación, tanto para aplicaciones…
71 parts - 2 layers118 × 105 mm

FilamentStorage
LilisProtoLab/FDM-print-station
The FDM print station of Lili's Proto Lab contains six printers, three printer enclosures and a dry-air filament drawer
84 partsMIT - 2 layers100 × 50 mm

- 2 layers224.8 × 60.3 mm

Deurnode nieuw
Hans-Beerman/Deurnode_ESP32-PoE
KiCad design Deurnode for the MakerSpace Leiden, based on the Olimex ESP32-PoE
38 parts4Apache-2.0 - 2 layers111.3 × 68.1 mm

MKS relay v4
3D-Printing-for-Microfluidics/3D_printer_control
2nd generation 3D printer control software
67 parts3GPL-3.0 - 2 layers

Watch cleaner pcb
DavidJ-Saving-Time/watch-cleaner
So this is a very rough draft of code designed to run on an esp32 to control a watch cleaning machine see this YouTube video https://youtu.be/Opr75n8DbYY I'll be adding to this and making it easier for people to use.
16 parts3MIT - 2 layers31.8 × 114.8 mm

3DWelderPCB
destroyer796/3DWelder
An overbuilt 3D pen that will use a chc pro hotend and custom dc extruder powered by a power tool battery
17 parts3MIT
Questions
How big is the Speed controller PCB?
It measures 100 × 100 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Speed controller use?
89 parts, built around the TSR 1-2450, IR2111, IRLZ34N and ADS1115. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Speed controller KiCad files?
From the Gregor-Davies/Zevallos repository on GitHub, at the commit this page was made from: the board is electronics/Speed controller.kicad_pcb and its schematic electronics/Speed controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Speed controller design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).