

Current shunt amplifier
- Size
- 53 × 38 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 15
- Pads
- 69
- Tracks, vias
- 78, 6
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 6 Oct 2024
- Updated
- 6 Oct 2024
Overview
Current shunt amplifier is an open-source printed circuit board by Gherkin, from the Gherkin/current_shunt_amplifier repository on GitHub. It is a 2-layer board of 53 × 38 mm with 31 parts on 15 nets, routed with 78 tracks and 6 vias.
It is built around the TPS7A2033PDBVR-TP. Its parts include 6 capacitors, 5 resistors, 3 connectors, 3 switches and 2 ICs. It belongs with the audio and music boards of this library.
Main components
1README
README.mdcurrent-shunt-amplifier
ibom: https://gherkin.github.io/current_shunt_amplifier/
schematic: https://gherkin.github.io/current_shunt_amplifier/current_shunt_amplifier.pdf
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | TestPoint | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | SW_SPST | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW1, SW2, SW3 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 10n | Capacitor_SMD:C_0402_1005Metric | C4, C5 |
| 2 | 4.7 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 33n | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J3 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_Coaxial | Connector_Coaxial:SMA_Amphenol_132289_EdgeMount | J1 |
| 1 | INA225AIDGKR | INA225:DGK0008A_N | U1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | L_Coupled | Inductor_SMD:L_CommonModeChoke_TDK_ACM7060 | L1 |
| 1 | TPS7A2033PDBVR | TPS7A2033:DBV0005A-IPC_B | U2 |
| 1 | TestPoint_Alt | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP6 |
Similar boards
- 2 layers35 × 17 mm

- 2 layers80.7 × 38.5 mm

- 2 layers100 × 100 mm

Zxevo1010 main
UzixLS/zxevo1010-board
10x10cm PCB variant of ZX-Evolution project for G738/G706 enclosure
252 parts26 - 2 layers100 × 100 mm

Zxuno1010
UzixLS/zxuno1010-board
10x10cm PCB variant of ZX-UNO project for G738/G706 enclosure
233 parts23MIT - 2 layers91.3 × 57.5 mm

- 4 layers144 × 127 mm

Frothfet
hoeken/frothfet
Yarrboard load controller board with current sense, volt sense, fuses, and sender support.
394 parts14GPL-3.0 - 6 layers100 × 62 mm

- 2 layers55 × 25 mm

Headless tef lite
FMDX-org/headless-tef-lite
Small low cost Headless TEF variant.
97 parts10CERN-OHL-W-2.0
Questions
How big is the Current shunt amplifier PCB?
It measures 53 × 38 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Current shunt amplifier use?
31 parts, built around the TPS7A2033PDBVR-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Current shunt amplifier KiCad files?
From the Gherkin/current_shunt_amplifier repository on GitHub, at the commit this page was made from: the board is current_shunt_amplifier.kicad_pcb and its schematic current_shunt_amplifier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Current shunt amplifier design in my own project?
Its repository states no licence, so its author keeps all rights: ask Gherkin before reusing the design.