Skip to the content
2 layers49.1 × 57.4 mmStepperMotorController, the printed circuit board in 3D

This board allows users to drive a stepper motor. This board has a xiao microcontroller,DRV8825 driver,limit switch detection for homing and end-stop functionality. It is ideal for CNC machines, 3D printers, robotics, and automation projects.

Size
49.1 × 57.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
24
Pads
68
Tracks, vias
120, 0
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
14 Mar 2025
Updated
17 Mar 2025

Overview

StepperMotorController is an open-source printed circuit board by Gautham-8066, from the Gautham-8066/Stepper-Motor-Controller-PCB repository on GitHub. It is a 2-layer board of 49.1 × 57.4 mm with 14 parts on 24 nets, routed with 120 tracks and 0 vias.

It is built around the MS0850502F030P1A. Its parts include 3 capacitors, 3 ICs, 3 connectors, 3 switches and 2 resistors. It belongs with the robots and motor control boards of this library.

Main components

1

README

README.md

Stepper-Motor-Controller-PCB

This board allows users to drive a stepper motor using a microcontroller, incorporating limit switch detection for homing and end-stop functionality. It is ideal for CNC machines, 3D printers, robotics, and automation projects.

Schematic: image

3D view of the board image

Don't mind the limit switch placement on the PCB, I know it can't be used if its placed there, but I don't know another way to show it in 3D view instead of placing on the PCB. I think you may Understand :)

Parts

14
QtyValueFootprintReferences
210kResistor_SMD:R_0201_0603MetricR1, R2
2MS0850502F030P1Alimit switch:SW_MS0850502F030P1AS1, S2
10.1uCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC3
10.22uCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC2
1100uCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC1
1DCJ200-10-A-XX-K_REVAdc barrel jack:GCT_DCJ200-10-A-XX-K_REVAJ3
1DRV8825_STEPPER_MOTOR_DRIVER_CARRIERDRV8825:IC_DRV8825_STEPPER_MOTOR_DRIVER_CARRIERU2
1LM7805_TO220Package_TO_SOT_THT:TO-220-3_VerticalU4
1MOUDLE-SEEEDUINO-XIAOSeeed Studio XIAO RP2040:MOUDLE14P-2.54-21X17.8MMU1
1SW_DIP_x03Button_Switch_SMD:SW_DIP_SPSTx03_Slide_6.7x9.18mm_W6.73mm_P2.54mm_LowProfile_JPinSW1
1Screw_Terminal_01x02TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_HorizontalJ1
1Screw_Terminal_01x04TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x04_P3.50mm_HorizontalJ2

Similar boards

  • 2 layers188.9 × 127.3 mmLaser gun oled, the printed circuit board in 3D

    Laser gun oled

    Aditya-eng/LASER_GUN

    18 parts
  • 2 layers105.3 × 87.3 mmStepper Motor DPDT, the printed circuit board in 3D

    Stepper Motor DPDT

    PrinceIoT/PCB_Design_Work

    The repository contain pcb design projects.

    11 parts
  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0

Questions

How big is the StepperMotorController PCB?

It measures 49.1 × 57.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the StepperMotorController use?

14 parts, built around the MS0850502F030P1A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the StepperMotorController KiCad files?

From the Gautham-8066/Stepper-Motor-Controller-PCB repository on GitHub, at the commit this page was made from: the board is StepperMotorController/StepperMotorController.kicad_pcb and its schematic StepperMotorController/StepperMotorController.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the StepperMotorController design in my own project?

Its repository states no licence, so its author keeps all rights: ask Gautham-8066 before reusing the design.