
StepperMotorController
Gautham-8066/Stepper-Motor-Controller-PCB
This board allows users to drive a stepper motor. This board has a xiao microcontroller,DRV8825 driver,limit switch detection for homing and end-stop functionality.

Laser gun oled is an open-source printed circuit board by Aditya-eng, from the Aditya-eng/LASER_GUN repository on GitHub. It is a 2-layer board of 188.9 × 127.3 mm with 18 parts on 41 nets, routed with 180 tracks and 6 vias.
It is built around the 100UF/16V and MS0850502F030P1A. Its parts include 2 resistors, 2 ICs, 2 switches, 1 capacitor and 1 diode. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | C_Polarized | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | 0.1uF1, 10uF1 |
| 1 | 100uF1 | Capacitor_Tantalum_SMD:CP_EIA-3528-12_Kemet-T_Pad1.50x2.35mm_HandSolder | C2 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3 |
| 1 | 22uH | Inductor_THT:inductor_vish_bhaiya | L1 |
| 1 | 680 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | ARDUINO_NANO | ARDUINO_NANO:SHIELD_ARDUINO_NANO | TB1 |
| 1 | Battery_Cell | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | BT1 |
| 1 | DM-OLED096-636 | DM-OLED096-636:MODULE_DM-OLED096-636 | U1 |
| 1 | D_Laser_1C2A | LED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm | LD1 |
| 1 | MS0850502F030P1A | Button_Switch_THT:limit_switch1 | S1 |
| 1 | NPN | npn_bc547:TO-92L_Inline_Wide | Q1 |
| 1 | SW_SPDT | CEDT_2023_v1-1:BIGSWITCH | SW1 |
| 1 | ~ | CEDT_2023_v1-1:B3F-40XX | 12 |
| 1 | ~ | Buzzer_Beeper:28mm | 11 |
| 1 | ~ | Converter_DCDC:bl8530-vishesh | U2 |
| 1 | ~ | CEDT_2023_v1-1:DO41-10 | D1 |
| 1 | ~ | TP4056_pcb_footprint:TP4056-18650 | TP4056_PCB1 |

Gautham-8066/Stepper-Motor-Controller-PCB
This board allows users to drive a stepper motor. This board has a xiao microcontroller,DRV8825 driver,limit switch detection for homing and end-stop functionality.



barisdinc/N3B_SDR_Transceiver_HW
V/U/SHF and QO-100 SDR Transceiver Project

terjeio/PCBLaserMkII
Mechanical and electrical design files for revised version of my PCB Laser exposer


skumlos/if-c01comg-clone-tht-full
A full sized SCART/BNC version of the IF-C01COMG clone base board
kholia/Easy-Beacons-STEM
Easy-Beacons project adapted for STEM education. Powered by Raspberry Pi Pico (W) boards. WSPR + FT8 beacons for science (TM).
It measures 188.9 × 127.3 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the 100UF/16V and MS0850502F030P1A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Aditya-eng/LASER_GUN repository on GitHub, at the commit this page was made from: the board is Laser_gun_oled.kicad_pcb and its schematic Laser_gun_oled.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Aditya-eng before reusing the design.