
Panel daisy
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

Dual op amp all pass filters for breadboarding of phaser effects
AllPass OpAmp is an open-source printed circuit board by GadgetReboot, from the GadgetReboot/AllPass_OpAmp repository on GitHub. It is a 2-layer board of 33.1 × 30.4 mm with 15 parts on 12 nets, routed with 154 tracks and 19 vias.
It is built around the TL072. Its parts include 6 resistors, 4 connectors, 3 capacitors and 1 IC.

Dual op amp all pass filters for breadboarding of phaser effects
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4 |
| 2 | 24K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6 |
| 2 | 47nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J3 |
| 1 | 100nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C3 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | LOGO | _Custom_Footprints:pcb way logo | G*** |
| 1 | TL072 | Package_DIP:DIP-8_W7.62mm | U1 |

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

ctag-fh-kiel/ctag-tbd
CTAG TBD >>to be determined<< an extendible open source Eurorack sound module

plinkysynth/plinky_public
a public release of the plinky sw and hw



matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules

StoneRose35/cortexguitarfx
guitar effects processor implemented on various arm cortex platforms
It measures 33.1 × 30.4 mm and has 2 copper layers, 1.6 mm thick.
15 parts, built around the TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the GadgetReboot/AllPass_OpAmp repository on GitHub, at the commit this page was made from: the board is KiCad/All_Pass_OpAmp.kicad_pcb and its schematic KiCad/All_Pass_OpAmp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask GadgetReboot before reusing the design.