
GR ESP32-A1S
GadgetReboot/ESP32-A1S
Breakout PCB for the ESP32-A1S module including an audio amp and basic GPIO headers, USB interface

ATTiny 14 pin device USB breakout pcb for 0-Series and 1-Series
GR ATTiny xx4 USB is an open-source printed circuit board by GadgetReboot, from the GadgetReboot/ATTiny_xx4_USB repository on GitHub. It is a 2-layer board of 50.7 × 27.9 mm with 26 parts on 33 nets, routed with 170 tracks and 7 vias.
It is built around the CH340G, PESD5V0S1BL and MF-FSMF050X-2. Its parts include 6 capacitors, 6 diodes, 5 resistors, 4 connectors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Design files
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R5 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C4 |
| 3 | PESD5V0S1BL | _Custom_Footprints:SOD-882 | D3, D4, D5 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C6 |
| 2 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J3, J4 |
| 1 | 12MHz | Crystal:Crystal_SMD_HC49-SD_HandSoldering | Y1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3 |
| 1 | ATtiny x04/x14 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | CH340G | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | LOGO | _Custom_Footprints:pcb way logo | G*** |
| 1 | MF-FSMF050X | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | F1 |
| 1 | Power | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 1 | Rx | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | Tx | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J1 |

GadgetReboot/ESP32-A1S
Breakout PCB for the ESP32-A1S module including an audio amp and basic GPIO headers, USB interface

Oleg-mk/MOST25-to-AUDIO
Passive MOST25 listener: Tang Nano 20K FPGA, ESP32 host, stereo I2S out with the head unit's volume, balance and tone

ballhog/calyx-level
Wired, fail-safe auto top-off (ATO) for a reef system. Part of the Corallite Calyx family (wired connected devices: Calyx-Outlet, Calyx-Sense, Calyx-Level).

Genabl/parasitic_monorepo
Second-board regression target for the volume-conductor pipeline.

jpsamuelson/aurora-icepower-booster
Balanced buffer / booster between aurora-freeDSP and ICEpower xxxASX2 amps.

sequoia-hope/circuit-composer
Board design as composition: verified chip packages, intent files and generated critical blocks for KiCad, between easy_pcb and ultraroute

sequoia-hope/ultraroute
PCB autorouting experiments around copperroute: route jobs, leaderboards, board morphing

gralco/l5-schematic
The Librem 5 schematics, copper layers, assembly drawings, and BOMs (mainboard and USB-C board).
It measures 50.7 × 27.9 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the CH340G, PESD5V0S1BL and MF-FSMF050X-2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the GadgetReboot/ATTiny_xx4_USB repository on GitHub, at the commit this page was made from: the board is KiCad/GR_ATTiny_xx4_USB.kicad_pcb and its schematic KiCad/GR_ATTiny_xx4_USB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask GadgetReboot before reusing the design.