Skip to the content
4 layers90.2 × 95.9 mmMy pcdu v1, the printed circuit board in 3D

Various CubeSat components and schematics.

Size
90.2 × 95.9 mm
Copper layers
4
Thickness
1.6 mm
Parts
137
Nets
154
Pads
528
Tracks, vias
434, 390
Pours
60
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
29 Aug 2023
Updated
23 Jun 2025

Overview

My pcdu v1 is an open-source printed circuit board by GachuhiWachira, from the GachuhiWachira/CubeSat repository on GitHub. It is a 4-layer board of 90.2 × 95.9 mm with 137 parts on 154 nets, routed with 434 tracks and 390 vias.

It is built around the TPS2034D. Its parts include 46 capacitors, 32 resistors, 21 diodes, 16 ICs and 8 connectors.

Main components

1

README

README.md

CubeSat

Parts

137
QtyValueFootprintReferences
200.1uFCapacitor_SMD:C_0805_2012MetricC1, C2, C3, C4, C5, C10, C11, C12, C13, C14, C15, C16, C33, C34, C35, C36 +4
16D_SchottkyDiode_SMD:D_SOD-123D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D17, D18, D20, D21
1222uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC21, C22, C23, C24, C37, C38, C41, C42, C43, C44, C45, C46
10TPS2034Package_SO:SO-8_3.9x4.9mm_P1.27mmU1, U2, U3, U4, U5, U6, U7, U8, U13, U14
91MResistor_SMD:R_0805_2012MetricR1, R2, R3, R4, R5, R6, R7, R8, R30
8100kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR9, R10, R13, R14, R17, R18, R19, R22
810uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC17, C18, C19, C20, C29, C30, C31, C32
6Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_HorizontalJ1, J2, J3, J4, J5, J6
410uCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC25, C26, C27, C28
41k5Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR15, R16, R20, R21
41uHInductor_SMD:L_Coilcraft_XAL4040-XXXL1, L2, L3, L4
4MountingHoleMountingHole:MountingHole_3.2mm_M3_PadM1, M2, M3, M4
210kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR23, R24
210nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC39, C40
237k4Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR27, R28
25.1kResistor_SMD:R_0805_2012MetricR31, R32
2750kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR11, R12
2820ΩResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR25, R26
2BQ24032ARHLRG4BQ24032ARHLRG4:IC_MSP430FR2522IRHLRU11, U12
2Battery_CellBattery:BatteryHolder_Keystone_1042_1x18650BT1, BT2
2ESQ-126-39-x-DConnector_PinHeader_2.54mm:PinHeader_2x26_P2.54mm_VerticalH1, H2
2GreenLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD14, D16
2RedLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD13, D15
2TPS61023DRLRTPS61023DRLR:DRL0006AU9, U10
2TPS61232DRCRTPS61232DRCR:VREG_TPS61232DRCRU15, U16
11.5kResistor_SMD:R_0805_2012MetricR29
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ7
1LEDDiode_SMD:D_0805_2012MetricD19
1LOGOlibrecube_pcb_template:LibreCube_logo_22.4mmG***
1Logo_Open_Hardware_SmallSymbol:OSHW-Logo_5.7x6mm_SilkScreenREF1
1USB_C_Receptacle_PowerOnly_6PConnector_USB:USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_HorizontalJ8

More from GachuhiWachira/CubeSat

1
  • 2 layers90.2 × 95.9 mmPcdu, the printed circuit board in 3D

    Pcdu

    GachuhiWachira/CubeSat

    Various CubeSat components and schematics.

    119 parts

Similar boards

  • 4 layers95 × 55.5 mmEinkPDA keyboard, the printed circuit board in 3D

    EinkPDA keyboard

    TalismanDesign/PocketMage_PDA

    An E-Ink PDA device using the ESP32 S3.

    137 parts2kApache-2.0
  • 4 layers70 × 43 mmUSMU v10, the printed circuit board in 3D

    USMU v10

    joeltroughton/uSMU

    Credit card-sized, USB-powered 4 quadrant source-measure unit hardware and firmware

    137 parts187
  • 4 layers58.4 × 101.9 mmUp5k osc, the printed circuit board in 3D

    Up5k osc

    emeb/up5k_osc

    The brute-force approach is to synthesize these analog waveforms at sufficiently high sample rates that the timing jitter becomes imperceptible.

    137 parts36MIT
  • 4 layers179 × 72.5 mmEL Load Power MCU, the printed circuit board in 3D

    EL Load Power MCU

    fietser28/EL-Load

    The DCL8010 electronic load module features a DC Electronic Load with several modes and protections. This project is the for the development boards for this project. There is a seperate git project for the firmware.

    137 parts15
  • 4 layers72 × 70 mmPL1, the printed circuit board in 3D

    PL1

    harris-newsteder/PL1

    137 parts13
  • 4 layers100 × 50 mmPsu ext, the printed circuit board in 3D

    Psu ext

    PSU-Ext-Org/psu-ext-hardware

    A repository to store PSU-EXT hardware design assets, schematics, circuit diagrams, CAD files and manufacturing data.

    137 parts9CERN-OHL-S-2.0
  • 4 layers28.6 × 80.6 mmPmodADC, the printed circuit board in 3D

    PmodADC

    schilkp/PmodADC

    A fully discrete 14bit, 41kHz, FPGA-controlled Successive-Approximation Audio ADC and R2R Audio DAC.

    137 parts6MIT
  • 4 layers285 × 160 mmPcb a power, the printed circuit board in 3D

    Pcb a power

    meshsat/meshsat-fieldkit

    MeshSat field kit hardware: the V1 kits as built, the V2 carrier PCB set for the Peli 1450 and the compact pocket-sized node (KiCad and OpenSCAD sources, generators, release files, build guides).

    137 parts4CERN-OHL-S-2.0

Questions

How big is the My pcdu v1 PCB?

It measures 90.2 × 95.9 mm and has 4 copper layers, 1.6 mm thick.

What parts does the My pcdu v1 use?

137 parts, built around the TPS2034D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the My pcdu v1 KiCad files?

From the GachuhiWachira/CubeSat repository on GitHub, at the commit this page was made from: the board is LibreCube PCDU/My version/src/electrical/my_pcdu_v1.kicad_pcb and its schematic LibreCube PCDU/LibreCube Board Template/src/electrical/librecube_pcb_template.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the My pcdu v1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask GachuhiWachira before reusing the design.