
6-axisIMU
GTPL-Testing/MonopropUAV
Project files + resources for the Monoprop UAV project

Project files + resources for the Monoprop UAV project
VCSEL is an open-source printed circuit board by GTPL-Testing, from the GTPL-Testing/MonopropUAV repository on GitHub, published under the MPL-2.0 licence. It is a 2-layer board of 54.6 × 29.2 mm with 16 parts on 10 nets, routed with 151 tracks and 24 vias.
Its parts include 6 resistors, 2 capacitors, 1 IC and 1 connector.
Project files + resources for the Monoprop UAV project
Google Drives: Please check these Drive folders for meeting slides, resources, etc.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100Ω | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 10kΩ | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | R_0603_1608Metric | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 1 | 100 nF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 4.7 μF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 5V | Connector_Wire:SolderWire-0.1sqmm_1x01_D0.4mm_OD1mm | 5V |
| 1 | Conn_01x04 | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | TPS82698SIPR | footprints:SIP0008A | U1 |
| 1 | ~ | VCSEL_footprints:QFN_BV0FY&slash_1_STM | VL53L1 |
The 12 most common of 16 parts.

GTPL-Testing/MonopropUAV
Project files + resources for the Monoprop UAV project

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 54.6 × 29.2 mm and has 2 copper layers, 1.6 mm thick.
16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the GTPL-Testing/MonopropUAV repository on GitHub, at the commit this page was made from: the board is Electronics/VCSEL/VCSEL.kicad_pcb and its schematic Electronics/6-axisIMU/6-axisIMU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).