

PANEL LED HARDWARE
- Size
- 62.2 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 35
- Pads
- 118
- Tracks, vias
- 245, 46
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Oct 2022
- Updated
- 18 Nov 2022
Overview
PANEL LED HARDWARE is an open-source printed circuit board by GISED-Link, from the GISED-Link/MQTT_Led_Panel repository on GitHub. It is a 2-layer board of 62.2 × 50.8 mm with 27 parts on 35 nets, routed with 245 tracks and 46 vias.
It is built around the 74HC374. Its parts include 11 capacitors, 5 connectors, 4 resistors, 3 ICs and 2 inductors.
Main components
1Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 22uF | Capacitor_SMD:C_0603_1608Metric | C3, C6, C9, C10 |
| 2 | , | ||
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C5 |
| 2 | 1000uF | PANEL_LED:Capa1000uF | C7, C8 |
| 2 | 100k | Resistor_SMD:R_0201_0603Metric | R1, R3 |
| 2 | 13.7k | Resistor_SMD:R_0201_0603Metric | R2, R4 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C1, C4 |
| 2 | 6.8uH | Inductor_SMD:L_Bourns_SRN6045TA | L1, L2 |
| 2 | LMR51430 | PANEL_LED:LMR51430 | U1, U2 |
| 2 | PWR_TO_LED | PANEL_LED:BORNIER_2P | J2, J3 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 74HC374 | PANEL_LED:SOIC-20 | U3 |
| 1 | Connector to pannel led | PANEL_LED:PANEL_CONNECTOR | J4 |
| 1 | EXT PIN | PANEL_LED:HN1x20 | J5 |
| 1 | PWR | PANEL_LED:BORNIER_2P | J1 |
Similar boards
- 4 layers100 × 100 mm

- 2 layers102 × 71 mm

REF1329 Altera
RWeick/REF1329-N64-Gameshark-Clone
This implements the original LZ9FC17 GAL on an Altera EPM240. It fully supports all functionality to include: parallel port, 7 segment display, and the GS button
41 parts48GPL-3.0 - 2 layers145.3 × 129.9 mm

C128Diag
hackup/C128Diag
Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.
61 parts16 - 2 layers152.4 × 162.6 mm

VGA
GeraKuznetsov/M68K-MBC
A M68k Multi-Board Computer design. The design basics is as follows: 1) A backplane PCB contains the majority of the bus, such as the address and data lines. 2) Cards slot into the backplane.
143 parts10 - 2 layers

- 2 layers101.6 × 98.4 mm

- 2 layers104.8 × 101 mm

Z2 io test02
krzys9876/ZX_Spectrum_diy
KiCad projects (schematics and boards) for a full-diy ZX Spectrum replica
65 parts2MIT - 2 layers100 × 160 mm

Steuerwerk
michAtEl/Bonsai-Modellcomputer
Es gibt auch eine Simulation des Lerncomputers (https://bonsai.pinyto.de/), die im digitalen Informatik-Schulbuch http://inf-schule.de verwendet wird.
332 parts2GPL-3.0
Questions
How big is the PANEL LED HARDWARE PCB?
It measures 62.2 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PANEL LED HARDWARE use?
27 parts, built around the 74HC374. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PANEL LED HARDWARE KiCad files?
From the GISED-Link/MQTT_Led_Panel repository on GitHub, at the commit this page was made from: the board is conception/PANEL_LED_HARDWARE/PANEL_LED_HARDWARE.kicad_pcb and its schematic conception/PANEL_LED_HARDWARE/PANEL_LED_HARDWARE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PANEL LED HARDWARE design in my own project?
Its repository states no licence, so its author keeps all rights: ask GISED-Link before reusing the design.