
Dif pressure meter
ardiloot/dif-pressure-meter
ESP32 based differential pressure (and air flow) meter. Handheld, battery powered DIY device for measuring small pressure differences (Sensirion SDP810-500Pa).

Badge com CH32V003 e Display E-paper
Franzininho Badge-2024 is an open-source printed circuit board by Franzininho, from the Franzininho/badge-2024 repository on GitHub. It is a 2-layer board of 96 × 64 mm with 68 parts on 37 nets, routed with 318 tracks and 373 vias.
It is built around the CH32V003F4P6, CR2032 and SIL2308-TP. Its parts include 20 resistors, 11 capacitors, 5 diodes, 4 ICs and 3 connectors. It belongs with the lEDs and displays boards and the RISC-V boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R6, R7, R8, R10, R11, R12, R13, R14, R15, R16, R17, R20 +1 |
| 6 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C4, C6, C7, C8 |
| 5 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C5, C9, C10, C11 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | 100K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R18, R19 |
| 3 | Fiducial | Fiducial:Fiducial_0.75mm_Mask1.5mm | FID1, FID2, FID3 |
| 2 | +3V | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP3, TP11 |
| 2 | GND | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP4, TP9 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | +VBAT | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP10 |
| 1 | 1.54in 200x200 | Franzininho-Badge:EPAPER_1.54in_200x200 | U3 |
| 1 | 2.13in 250x122 | Franzininho-Badge:EPAPER_2.13in_250x122 | U4 |
| 1 | CH32V003F4P6 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | CR2032 | Battery:BatteryHolder_Keystone_3002_1x2032 | BT1 |
| 1 | OLED 128x64 1.3" | Franzininho-Badge:OLED 128x64 1.3in | U2 |
| 1 | ON | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxJ | SW2 |
| 1 | PA1 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | PA1 | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP8 |
| 1 | PA2 | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP7 |
| 1 | PA2 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | PC4 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | PC4 | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP5 |
| 1 | PC7 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | PC7 | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP6 |
| 1 | POWER | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5 |
| 1 | RESET | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxJ | SW3 |
| 1 | SCL | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP2 |
| 1 | SDA | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP1 |
| 1 | SIL2308 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | Q1 |
| 1 | SPI | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J3 |
| 1 | SWIO | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J2 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J1 |
| 1 | USER | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxJ | SW1 |

ardiloot/dif-pressure-meter
ESP32 based differential pressure (and air flow) meter. Handheld, battery powered DIY device for measuring small pressure differences (Sensirion SDP810-500Pa).

sparkfun/SparkFun_Soft_Power_Switch_Mk2
Documentation, example code, and hardware for the SparkFun Soft Power Switch - JST 2mm.

sparkfun/SparkFun_Soft_Power_Switch_USB-C
Documentation, example code, and hardware for the SparkFun Soft Power Switch - USB-C.





gili-yankovitch/SwordOfSecrets
To solve the challenge you will need to discover a series of flags, hidden inside the sword. Each one will help you unlock the next step in the challenge, to finally reveal the ultimate secret the sword holds.
It measures 96 × 64 mm and has 2 copper layers, 1.6 mm thick.
68 parts, built around the CH32V003F4P6, CR2032 and SIL2308-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Franzininho/badge-2024 repository on GitHub, at the commit this page was made from: the board is HARDWARE/Franzininho-Badge-2024/Franzininho-Badge-2024.kicad_pcb and its schematic HARDWARE/Franzininho-Badge-2024/Franzininho-Badge-2024.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Franzininho before reusing the design.