
Parkside Contacts
FranzImsch/parkside-adapter
Bi-directional USB-C PD interface for Parkside tool batteries

Bi-directional USB-C PD interface for Parkside tool batteries
Parkside-100W Brick is an open-source printed circuit board by FranzImsch, from the FranzImsch/parkside-adapter repository on GitHub. It is an 8-layer board of 50 × 23 mm with 82 parts on 60 nets, routed with 478 tracks and 575 vias.
It is built around the DS8561-33D4, ME6228A50PG and 1N5819W, with the AGML315ME, BSD3A311V and D20V0L1B2LP-7B among its other parts. Its parts include 27 capacitors, 24 resistors, 10 diodes, 7 transistors and 7 connectors.

Lidl sells batteries for their Parkside-branded power tools. These are 5S lithium-ion batteries that are well-constructed and cost approximately €20 for the 4 Ah version. While the cells are not from premium brands, they appear to be of relatively high quality. For instance, the 4 Ah battery I purchased contains Sunpower INR19/66 cells. Detailed information about these cells can be found here:
Parkside INR18650E 2000mAh (Blue) Review
Sunpower High-Rate Lithium-Ion Battery Specifications
Currently, Lidl offers a USB charger add-on for these batteries, but it has significant limitations. Its output power is restricted to 15 W, and it does not support charging the battery via USB.
Product page
The adaptor described here comprises a 3D-printed enclosure and a PCB with soldered contacts that connect to the battery terminals. The interface PCB includes two mounting locations for power modules.
The screenshot shows a cross section view of the assembly.
The bi-directional 100 W USB-C module, based on the IP2368 chip, is used in the current implementation.
Future developments are planned, including a 240 W power module and a PCB with a microcontroller and control logic.
The IP2368 chip is available in several firmware versions. I chose the IP2368_I2C_NACT variant, which supports I2C communication and can function as a USB-C source immediately upon connection to a battery, without requiring an initial connection to a charger. Sourcing this chip outside China is challenging; I obtained mine via LCSC. Note that a quotation request is necessary, as this chip is typically not in stock.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Franz-Lib:C_0402_1005Metric_NoSilk | C1, C2, C5, C7, C9, C27 |
| 5 | 10kΩ | Franz-Lib:R_0402_1005Metric_NoSilk | R6, R9, R12, R14, R17 |
| 5 | 22µF | Franz-Lib:C_0805_2012Metric_NoSilk | C8, C14, C15, C20, C26 |
| 4 | 1MΩ | Franz-Lib:R_0402_1005Metric_NoSilk | R15, R16, R19, R20 |
| 4 | 68µF | Franz-Lib:CP_Elec_6.3x6.0 | C11, C12, C13, C18 |
| 3 | 1N5819W | Franz-Lib:D_SOD-323_SmallSilk | D4, D6, D10 |
| 3 | Conn_01x01_Pin | Franz-Lib:MountingHole_2.2mm_M2_Pad_Via_NoSilk | J1, J3, J6 |
| 2 | 10Ω | Franz-Lib:R_0402_1005Metric_NoSilk | R3, R4 |
| 2 | 1nF | Franz-Lib:C_0402_1005Metric_NoSilk | C22, C23 |
| 2 | 1µF | Franz-Lib:C_0402_1005Metric_NoSilk | C3, C4 |
| 2 | 2.2kΩ | Franz-Lib:R_0402_1005Metric_NoSilk | R21, R22 |
| 2 | 2.2µF | Franz-Lib:C_0402_1005Metric_NoSilk | C6, C10 |
| 2 | 2.2µF | Franz-Lib:C_0402_1005Metric_NoSilk_DNP | C21, C25 |
| 2 | 2.2µF | Franz-Lib:C_0603_1608Metric_NoSilk | C16, C17 |
| 2 | 2Ω | Franz-Lib:R_0402_1005Metric_NoSilk | R13, R18 |
| 2 | 5mΩ | Franz-Lib:R_1206_3216Metric_NoSilk | R1, R2 |
| 2 | AGML315ME | Franz-Lib:SOT-23-6_NoSilk | Q1, Q2 |
| 2 | BSD3A311V | Franz-Lib:D_SOD-323_SmallSilk | D2, D3 |
| 2 | Conn_01x01_Pin | Franz-Lib:Mounting_Wuerth_WA-SMSI-M2_H6mm_9774060243 | J4, J7 |
| 2 | D20V0L1B2LP-7B | Franz-Lib:X1-DFN1006-2_P6X1_DIO | D5, D7 |
| 2 | FS03LBDF | Franz-Lib:X1-DFN1006-2_P6X1_DIO | D8, D9 |
| 2 | RUH30J51M | Franz-Lib:DFN-8_L6.0-W5.0-P1.27_AON6938 | Q12, Q13 |
| 1 | 100kΩ | Franz-Lib:R_0402_1005Metric_NoSilk | R24 |
| 1 | 10µF | Franz-Lib:C_0603_1608Metric_NoSilk | C19 |
| 1 | 10µH | Franz-Lib:7443762504100 | L1 |
| 1 | 18kΩ | Franz-Lib:R_0402_1005Metric_NoSilk | R10 |
| 1 | 22µF | Franz-Lib:C_0603_1608Metric_NoSilk | C24 |
| 1 | 25kΩ | Franz-Lib:R_0402_1005Metric_NoSilk | R5 |
| 1 | 510kΩ | Franz-Lib:R_0402_1005Metric_NoSilk | R23 |
| 1 | 5kΩ | Franz-Lib:R_0402_1005Metric_NoSilk | R11 |
| 1 | >5A | Franz-Lib:Fuse_1206_3216Metric_NoSilk | F1 |
| 1 | Conn_01x06_MountingPin | Franz-Lib:JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal_NoSilk | J5 |
| 1 | DS8561-33D4 | Franz-Lib:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm_NoSilk_DNP | U3 |
| 1 | ESD56201D20-2/TR | Franz-Lib:ST_QFN1610_1_NoSilk | D1 |
| 1 | IP2368 | Franz-Lib:QFN-48-1EP_7x7mm_P0.5mm_EP5.45x5.45mm_NoSilk | U1 |
| 1 | L2N7002WT1G | Franz-Lib:SOT-323_SC-70_NoSilk | Q3 |
| 1 | LOGO | Franz-Lib:logo_5.5 | G*** |
| 1 | ME6228A50PG | Franz-Lib:SOT-89-3_NoSilk | U2 |
| 1 | Q_NMOS_SGD | Franz-Lib:WDFN8_NoSilk | Q6 |
| 1 | Q_PMOS_SGD | Franz-Lib:WDFN8_NoSilk | Q5 |
| 1 | R_Small | Franz-Lib:R_0402_1005Metric_NoSilk | R27 |
| 1 | Resistor_3_Bridged12_0402 | Franz-Lib:R_0402_JUMPER3_NoSilk | R25 |
| 1 | TMP102xxDRL | Franz-Lib:SOT-563_NoSilk | U4 |
| 1 | USB_C_Receptacle_USB2.0_C393939 | Franz-Lib:USB_C_Receptacle_C313131_TYPE-C-31-M-12 | J2 |

FranzImsch/parkside-adapter
Bi-directional USB-C PD interface for Parkside tool batteries



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
![[DFR1144][M027.00940](V1.0.0), the printed circuit board in 3D](/embed/boards/LattePandaTeam/LattePanda-Mu.jpg?size=s&soon)
LattePandaTeam/LattePanda-Mu
All About LattePanda Mu N100/N305 Compute Module



Mposiblee/Zireael
The keyboard is based on Dao Chok BLE. The locations of components on the board have been changed, space for the battery has been added, and the thumb cluster has also been changed.

stanleyondrus/ILDAWaveX16
ILDAWaveX16 is an open-source, high-resolution, wireless laser DAC with SD-card playback, network control, and ILDA output.
It measures 50 × 23 mm and has 8 copper layers, 1.6 mm thick.
82 parts, built around the DS8561-33D4, ME6228A50PG, 1N5819W and AGML315ME. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the FranzImsch/parkside-adapter repository on GitHub, at the commit this page was made from: the board is 100W-Bick-KiCad/Parkside-100W-Brick.kicad_pcb and its schematic 100W-Bick-KiCad/Parkside-100W-Brick.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask FranzImsch before reusing the design.