2 layers25 × 30 mm
Francisco Câmara
FranciscoCamara/PCB-Design-Course
Course materials and projects for learning PCB design
17 parts
4 layers54 × 54 mm
Francisco Câmara
FranciscoCamara/PCB-Design-CourseCourse materials and projects for learning PCB design
- Size
- 54 × 54 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 85
- Pads
- 315
- Tracks, vias
- 1,125, 136
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Jun 2025
- Updated
- 28 Sep 2025
Overview
Francisco Câmara is an open-source printed circuit board by FranciscoCamara, from the FranciscoCamara/PCB-Design-Course repository on GitHub. It is a 4-layer board of 54 × 54 mm with 74 parts on 85 nets, routed with 1,125 tracks and 136 vias.
It is built around the PIC32MZ1024EFE064-E/PT, FT231XS-R and TPS79633DCQR, with the B3F-1005, 10118194-0001LF and B3F-1000 among its other parts. Its parts include 33 capacitors, 13 resistors, 7 connectors, 5 diodes and 4 switches. It belongs with the PIC boards of this library.
Main components
8
PIC32MZ1024EFE064-E/PT
TQFP-64(10x10)-40℃~+125℃ 12bit 180MHz 1MB 2.1V~3.6V 256KB 32 Bit 46 Built-in FLASH MIPS32 M-Class TQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
FT231XS-R
SSOP-20-150mil-40℃~+85℃ 125uA 5V 8.4mA USB 2.0 USB to UART SSOP-20-150mil USB Converters ROHSFTDIUSB Converters
TPS79633DCQR
SOT-223-6-40℃~+125℃@(Tj) 1 1A 3.3V 325mV@(1A) 385uA 42dB@(100kHz)、59dB@(100Hz) 5.5V Fixed Over Current Protection、Enable、Thermal Shutdown Positive SOT-223-6 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
B3F-1005
插件-4P,6x6mm-25℃~+70℃ 100,000 Cycles 2.6N 24V 4.3mm 50mA 6mm 6mm PC Pin Round Button SPST-NO Through Hole Plugin-4P,6x6mm Tactile Switches ROHSOmronTactile Switches
10118194-0001LF
SMD-30℃~+80℃ 1 100V 5P Black Female Micro-B USB 2.0 SMD USB Connectors ROHSAmphenolUSB Connectors
B3F-1000
插件-4P,6x6mm-25℃~+70℃ 1,000,000 cycles 1N 24V 4.3mm 50mA 6mm 6mm PC Pin Round Button SPST-NO Through Hole 插件-4P,6x6mm Tactile Switches ROHSOmronTactile Switches
B3F-1002
插件-4P,6x6mm-25℃~+70℃ 1.5N 24V 300,000 Cycles 4.3mm 50mA 6mm 6mm PC Pin Round Button SPST-NO Through Hole 插件-4P,6x6mm Tactile Switches ROHSOmronTactile Switches
HSEC8-120-01-S-D-EM2
P=0.8mm-55℃~+125℃ 0.8mm 40P Beryllium copper Clamping plate Gold P=0.8mm Edgeboard Connectors ROHSSamtecEdgeboard Connectors
README
README.mdPCB Design Course
A repository containing course material, projects, and examples for learning printed circuit board (PCB) design using KiCad.
About
This repository hosts all the materials for the PCB Design Course taught by Profesor Cândido Duarte. It is intended for students who want to learn the fundamentals of PCB design, from schematic capture to board layout, fabrication files, and assembly.
Course Structure
The course is organized into projects. Each project builds on the previous one.
PCB-Design-Course/
├── Projeto1/ ← First project (simple design, single layer, etc.)
├── Projeto2/ ← More advanced design (multi-layer, components, etc.)
└── README.mdProjects
Projeto1
-
Description: introductory project
-
What you will learn: basic schematic design, layout, design rules, generating Gerbers
-
Included files: schematic (.sch), board (.brd), Gerber files
Projeto2
-
Description: intermediate / advanced design
-
What you will learn: multi-layer design, routing, power planes, via strategies
-
Included files: improved schematic, board files, drill files, BOM, etc.
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C08, C09, C11, C13, C16, C19, C22, C25, C28, C30, C31, C32, C33 |
| 7 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C14, C17, C18, C21, C24, C27 |
| 6 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C15, C20, C23, C26, C29 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R05, R06, R07, R09 |
| 3 | TestPoint_Pad_D1.5mm | TestPoint:TestPoint_Pad_D1.5mm | 3V3, 5V, GND |
| 2 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C02, C04 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R01, R2 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R03, R04 |
| 2 | 47p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C05, C06 |
| 2 | B3F-1005 | Lib_fp:SW_B3F-1000_OMR | S3, S4 |
| 2 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1, J2 |
| 1 | 0.2n | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L2 |
| 1 | 10118194-0001LF | Lib_fp:AMPHENOL_10118194-0001LF | P1 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R08 |
| 1 | 1K37 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C03 |
| 1 | 2K7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 2u2 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 4K53 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C07 |
| 1 | B3F-1000 | Lib_fp:SW_B3F-1000_OMR | S2 |
| 1 | B3F-1002 | Lib_fp:SW_B3F-1000_OMR | S1 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | P3 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | P4 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | P2 |
| 1 | FT231XS-R | Package_SO:SSOP-20_3.9x8.7mm_P0.635mm | U2 |
| 1 | FerriteBead_Small | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | HSEC8-120-01-S-D-EM2 | Lib_fp:SAMTEC_HSEC8-120-01-S-D-EM2 | P5 |
| 1 | LED_BLUE | Lib_fp:LED_APT1608LVBC_D | D1 |
| 1 | LED_GREEN | Lib_fp:LED_APT1608LVBC_D | D2 |
| 1 | LED_ORANGE | Lib_fp:LED_APT1608LVBC_D | D4 |
| 1 | LED_RED | Lib_fp:LED_APT1608LVBC_D | D5 |
| 1 | LED_YELLOW | Lib_fp:LED_APT1608LVBC_D | D3 |
| 1 | PIC32MZ1024EFE064-E/PT | Lib_fp:TQFP64_PT_MCH | U3 |
| 1 | TPS79633DCQR | Lib_fp:VREG_TPS79633DCQR | U1 |
The 70 most common of 74 parts.
More from FranciscoCamara/PCB-Design-Course
1Similar boards
- 2 layers55.1 × 38.2 mm
1STM
Dxem/Learning-pcb-design
Im learning pcb design - so everything i do in this repo is open source and you are free to use this designs
30 parts1Apache-2.0 - 4 layers150 × 150 mm
ECP5U85-BSE USB IO Tester
open-ephys/ECP5U85-BSE-USB-IO-Tester
IO Test board for ECP5U85-BSE-USB
96 parts1 - 2 layers50 × 50 mm
PDA
jacobjuneau6/PDA
A simple ESP32-S3 based phone companion and pocket computer. This open-source hardware project includes a custom PCB, 3D-printable case, and Arduino firmware — everything you need to build a portable device with a color…
16 partsMIT - 2 layers7 × 3 mm
ReflowControl
clytle374/Smallish-Reflow-Controller
Yet another reflow oven from a toaster oven project.
12 parts1 - 4 layers80 × 54 mm
- 2 layers72.8 × 32 mm
- 2 layers85 × 155 mm
Esp32-fan controller
merlindorin/esp32-fan-controller
A small KiCad board to keep my home server cabinet cool. 4 PWM fans, 4 temperature probes, one ESP32.
38 parts8MIT - 4 layers73.1 × 69.8 mm
Stm32u595-breakout
oresat/oresat-kicad
All things KiCAD for OreSat; libraries, tools, settings, etc.
85 parts6
Questions
How big is the Francisco Câmara PCB?
It measures 54 × 54 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Francisco Câmara use?
74 parts, built around the PIC32MZ1024EFE064-E/PT, FT231XS-R, TPS79633DCQR and B3F-1005. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Francisco Câmara KiCad files?
From the FranciscoCamara/PCB-Design-Course repository on GitHub, at the commit this page was made from: the board is Projeto2/Entrega/Francisco-Câmara.kicad_pcb and its schematic Projeto1/Entrega/Francisco-Câmara.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Francisco Câmara design in my own project?
Its repository states no licence, so its author keeps all rights: ask FranciscoCamara before reusing the design.