
Placa tesis
FranMald/Proyecto-Final-luminarias
Sistema de luminarias led monitoreadas remotamente

Sistema de luminarias led monitoreadas remotamente
Prueba placa2 is an open-source printed circuit board by FranMald, from the FranMald/Proyecto-Final-luminarias repository on GitHub. It is a 2-layer board of 83.4 × 99.1 mm with 88 parts on 132 nets, routed with 773 tracks and 68 vias.
It is built around the ESP-12E and FT230XS-R. Its parts include 32 resistors, 15 capacitors, 13 connectors, 8 ICs and 5 diodes. It belongs with the ESP8266 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | R | Resistors_SMD:R_1206 | R1, R2, R7, R8, R9, R27 |
| 5 | 270 | Resistors_SMD:R_1206 | R22, R23, R24, R31, R32 |
| 4 | 0.2 | Resistors_SMD:R_2512 | R3, R4, R5, R6 |
| 4 | 10K | Resistors_SMD:R_1206 | R30, R33, R34, R35 |
| 4 | 27 | Resistors_SMD:R_1206 | R11, R19, R28, R29 |
| 4 | 47p | Capacitors_SMD:C_1206 | C6, C7, C14, C15 |
| 4 | Q_NMOS_GDS | Power_Integrations:TO-220 | Q1, Q2, Q3, Q4 |
| 3 | 100n | Capacitors_SMD:C_1206 | C8, C12, C16 |
| 3 | C | Capacitors_SMD:C_1206 | C2, C3, C4 |
| 3 | LED | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | D1, D2, D4 |
| 3 | LED | LED_SMD:LED_1206_3216Metric | PWR1, Rx1, Tx1 |
| 2 | 10K | Resistor_SMD:R_1206_3216Metric | R13, R14 |
| 2 | 10n | Capacitors_SMD:C_1206 | C1, C13 |
| 2 | Conn_01x08 | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | J7, J8 |
| 2 | Conn_01x14 | Pin_Headers:Pin_Header_Straight_1x14_Pitch2.54mm | J9, J10 |
| 2 | FT230XS | Housings_SSOP:SSOP-16_3.9x4.9mm_Pitch0.635mm | U1, U9 |
| 2 | LED | LEDs:LED_0805_HandSoldering | Rx2, Tx2 |
| 2 | LM3464AMH_NOPB | LM3464AMH_NOPB:SOP65P640X110-29N | U4, U8 |
| 2 | USB_B_Micro | Connectors_USB:USB_Micro-B_Wuerth-629105150521 | J2, J11 |
| 1 | .1 | Resistors_SMD:R_1206 | R25 |
| 1 | 100n | Capacitor_SMD:C_1206_3216Metric | C10 |
| 1 | 10k | Resistors_SMD:R_1206 | R21 |
| 1 | 270 | Resistor_SMD:R_2816_7142Metric | R12 |
| 1 | 4.7k | Resistors_SMD:R_1206 | R20 |
| 1 | 4.7k | Resistor_SMD:R_1206_3216Metric | R26 |
| 1 | 4.7u | Capacitor_SMD:C_1206_3216Metric | C9 |
| 1 | 4.7u | Capacitors_SMD:C_1206 | C11 |
| 1 | 7.5m | USERPKG:R_2816 | R12 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_103_1x20mm | BT1 |
| 1 | Conn_01x02 | Connectors_Terminal_Blocks:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J15 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J13 |
| 1 | Conn_01x06 | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J12 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J14 |
| 1 | DIODE | Diode_SMD:D_SMA | D5 |
| 1 | ESP-12E | RF_Module:ESP-12E | U5 |
| 1 | INA226 | Package_SO:VSSOP-10_3x3mm_P0.5mm | U3 |
| 1 | LED | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mmnosilk | D3 |
| 1 | Nodemcuv_3 | nodemcu:DIP-30_1098_ELL | U2 |
| 1 | Pin_Header_Straight_1x01_Pitch2.54mm | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | OutP |
| 1 | R | Resistor_SMD:R_1206_3216Metric | R10 |
| 1 | Ra-01-LoRa | USERPKG:Ai-Thinker-Ra-01-LoRa | U7 |
| 1 | Thermistor_NTC | Pin_Headers:Pin_Header_Angled_1x02_Pitch2.54mm | TH1 |
The 85 most common of 88 parts.

FranMald/Proyecto-Final-luminarias
Sistema de luminarias led monitoreadas remotamente



jkominek/piano-conversion
Hardware, and some firmware, for acoustic piano to MIDI controller conversion.


BayLibre/Copilot
Manage a DUT power and serial through a single USB port, no additional software required.

tuna-f1sh/nixiepipe-hardware
Hardware design files and firmware for my Nixie Pipe modules

prototipado/bioamp
BioAmp is an opensource project of a multichannel biopotential adquisition system for EEG, EMG, EOG and EOG signals.

96boards/96boards-uart
96Boards UART adapter hardware design files
It measures 83.4 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
88 parts, built around the ESP-12E and FT230XS-R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the FranMald/Proyecto-Final-luminarias repository on GitHub, at the commit this page was made from: the board is Placa/Prueba_placa2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask FranMald before reusing the design.