
Desk controller
FLRHW/Desk_controller
Standing desk controller - Touch display as HMI and servo motor interface

PCB for the pong-digitaal project
Pong PCB is an open-source printed circuit board by Fontys-Pong, from the Fontys-Pong/pong-PCB repository on GitHub. It is a 4-layer board of 100 × 100 mm with 99 parts on 92 nets, routed with 1,003 tracks and 286 vias.
It is built around the SN74LVC2G34DBV, LMR23630APQDRRTQ1 and TPD12S016RKTR, with the SMAJ28A and SRP6540-100M among its other parts. Its parts include 31 capacitors, 23 resistors, 10 connectors, 9 ICs and 6 diodes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100n 10v | Capacitor_SMD:C_0603_1608Metric | C10, C11, C12, C14, C15, C16, C19, C20, C22, C23, C24, C25, C27, C28, C29, C30 +2 |
| 10 | 68 | Resistor_SMD:R_0603_1608Metric | R11, R12, R13, R14, R15, R19, R20, R21, R22, R23 |
| 10 | CG0603MLU-3,3E | Resistor_SMD:R_0603_1608Metric | RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8, RV9, RV10 |
| 9 | 22.1k | Resistor_SMD:R_0603_1608Metric | R3, R6, R7, R8, R9, R10, R16, R17, R18 |
| 6 | 47u 10v | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7, C8, C13, C18, C21, C26 |
| 5 | SN74LVC2G34DBV | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U5, U6, U7, U8, U9 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 4 | SMAJ28A | Diode_SMD:D_SMA | D3, D4, D5, D6 |
| 3 | 74279220800 | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L2, L3, L5 |
| 3 | Screw_Terminal_01x02 | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J1, J5, J8 |
| 2 | 100n 50v | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 2 | 4.7u 50v | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5 |
| 2 | Screw_Terminal_01x03 | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_3-G-5,08_1x03_P5.08mm_Horizontal | J3, J4 |
| 2 | Screw_Terminal_01x05 | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_5-G-5,08_1x05_P5.08mm_Horizontal | J6, J7 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 118k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 1uH | Inductor_SMD:L_1008_2520Metric | L4 |
| 1 | 2.2u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 37.4k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 680n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 685119134923 | MyLib:685119134923 | J2 |
| 1 | 88.7k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J11 |
| 1 | Conn_01x14_Socket | Connector_PinSocket_2.54mm:PinSocket_2x07_P2.54mm_Vertical | J9 |
| 1 | D_TVS | Diode_SMD:D_SMB_Handsoldering | D2 |
| 1 | LMR23630APQDRRTQ1 | MyLib:LMR23630APQDRRTQ1 | U1 |
| 1 | MAX17626ATA+T | MyLib:SON50P200X200X80-9N-D | U4 |
| 1 | MultiFuse | MyLib:Fuse MF-MSMF075 33X-2 | F1 |
| 1 | S3MB-13-F | Diode_SMD:D_SMB_Handsoldering | D1 |
| 1 | SRP6540-100M | MyLib:SRP6540-100M | L1 |
| 1 | TPD12S016RKTR | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U3 |
| 1 | ~ | Library:CmodA7 | U2 |

FLRHW/Desk_controller
Standing desk controller - Touch display as HMI and servo motor interface




EI9SP/Remote-Antenna-Switch
Four to one Remote Antenna Switch, Full duplex RS485

generationmake/ElaraGNSSMKRShield
GNSS Shield with Wuerth Elara for Arduino MKR

opulo-inc/example-autobom-project
example repo for testing autobom functionality

It measures 100 × 100 mm and has 4 copper layers, 1.58 mm thick.
99 parts, built around the SN74LVC2G34DBV, LMR23630APQDRRTQ1, TPD12S016RKTR and SMAJ28A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Fontys-Pong/pong-PCB repository on GitHub, at the commit this page was made from: the board is pong_pcb/pong_pcb.kicad_pcb and its schematic pong_pcb/3v3-psu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Fontys-Pong before reusing the design.