
Panel daisy
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

TPA-1 is an open-source printed circuit board by Flacarica, from the Flacarica/TPA-1 repository on GitHub. It is a 2-layer board of 67.7 × 22.2 mm with 16 parts on 11 nets, routed with 61 tracks and 0 vias.
It is built around the TL072. Its parts include 5 resistors, 4 capacitors, 3 connectors, 1 IC and 1 diode.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R4, R5 |
| 3 | Conn_01x02_Pin | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J1, J2, J3 |
| 2 | 10µF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C4 |
| 1 | 100kΩ | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV2 |
| 1 | 100µF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 10kΩ | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV1 |
| 1 | 220Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 47µF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | LED | LED_THT:LED_D5.0mm_Clear | D1 |
| 1 | TL072 | Package_DIP:DIP-8_W7.62mm | U1 |

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

ctag-fh-kiel/ctag-tbd
CTAG TBD >>to be determined<< an extendible open source Eurorack sound module

plinkysynth/plinky_public
a public release of the plinky sw and hw



matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules

StoneRose35/cortexguitarfx
guitar effects processor implemented on various arm cortex platforms
It measures 67.7 × 22.2 mm and has 2 copper layers, 1.6 mm thick.
16 parts, built around the TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Flacarica/TPA-1 repository on GitHub, at the commit this page was made from: the board is KiCAD project files/TPA-1/TPA-1.kicad_pcb and its schematic KiCAD project files/TPA-1/TPA-1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Flacarica before reusing the design.