

PeopleMover
A dual ISO Enter PCB designed around Minivan case compatibility
- Size
- 244.5 × 77.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 106
- Nets
- 68
- Pads
- 403
- Tracks, vias
- 830, 56
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 10 Dec 2019
- Updated
- 22 Dec 2019
Overview
PeopleMover is an open-source printed circuit board by FionaCutler, from the FionaCutler/PeopleMoverPCB repository on GitHub. It is a 2-layer board of 244.5 × 77.8 mm with 106 parts on 68 nets, routed with 830 tracks and 56 vias.
It is built around the ATMEGA32U4-AU. Its parts include 43 diodes, 7 capacitors, 4 resistors, 1 IC and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdPeople Mover PCB
A dual ISO Enter PCB designed around Minivan case compatibility
Parts
106| Qty | Value | Footprint | References |
|---|---|---|---|
| 43 | SOD-123 | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +27 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C5 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 1 | / | MX_Only:MXOnly-1.5U-NoLED | MX31 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | ; | MX_Only:MXOnly-1U-NoLED | MX38 |
| 1 | < | MX_Only:MXOnly-1U-NoLED | MX32 |
| 1 | > | MX_Only:MXOnly-1U-NoLED | MX35 |
| 1 | A | MX_Only:MXOnly-1U-NoLED | MX5 |
| 1 | ATmega32U4-AU | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | Alt | MX_Only:MXOnly-1.25U-NoLED | MX11 |
| 1 | B | MX_Only:MXOnly-1U-NoLED | MX21 |
| 1 | Bkspc | MX_Only:MXOnly-2U-FLIPPED-ReversedStabilizers | MX25 |
| 1 | C | MX_Only:MXOnly-1U-NoLED | MX14 |
| 1 | Ctrl | MX_Only:MXOnly-1.5U-NoLED | MX3 |
| 1 | D | MX_Only:MXOnly-1U-NoLED | MX13 |
| 1 | Down | MX_Only:MXOnly-1U-NoLED | MX40 |
| 1 | E | MX_Only:MXOnly-1U-NoLED | MX12 |
| 1 | Ent | MX_Only:MXOnly-ISO-ReversedStabilizers | MX41 |
| 1 | Esc | MX_Only:MXOnly-ISO-ReversedStabilizers | MX1 |
| 1 | F | MX_Only:MXOnly-1U-NoLED | MX17 |
| 1 | G | MX_Only:MXOnly-1U-NoLED | MX20 |
| 1 | H | MX_Only:MXOnly-1U-NoLED | MX23 |
| 1 | I | MX_Only:MXOnly-1U-NoLED | MX29 |
| 1 | J | MX_Only:MXOnly-1U-NoLED | MX27 |
| 1 | K | MX_Only:MXOnly-1U-NoLED | MX30 |
| 1 | L | MX_Only:MXOnly-1U-NoLED | MX34 |
| 1 | Left | MX_Only:MXOnly-1U-NoLED | MX36 |
| 1 | M | MX_Only:MXOnly-1U-NoLED | MX28 |
| 1 | N | MX_Only:MXOnly-1U-NoLED | MX24 |
| 1 | O | MX_Only:MXOnly-1U-NoLED | MX33 |
| 1 | P | MX_Only:MXOnly-1U-NoLED | MX37 |
| 1 | Q | MX_Only:MXOnly-1U-NoLED | MX4 |
| 1 | R | MX_Only:MXOnly-1U-NoLED | MX16 |
| 1 | Right | MX_Only:MXOnly-1U-NoLED | MX43 |
| 1 | S | MX_Only:MXOnly-1U-NoLED | MX9 |
| 1 | SW_Push | random-keyboard-parts:SKQG-1155865 | SW1 |
| 1 | Shift | MX_Only:MXOnly-1U-NoLED | MX42 |
| 1 | Shift | MX_Only:MXOnly-1.75U-NoLED | MX2 |
| 1 | Space | MX_Only:MXOnly-2.25U-ReversedStabilizers-NoLED | MX15 |
| 1 | T | MX_Only:MXOnly-1U-NoLED | MX19 |
| 1 | U | MX_Only:MXOnly-1U-NoLED | MX26 |
| 1 | Up | MX_Only:MXOnly-1U-NoLED | MX39 |
| 1 | V | MX_Only:MXOnly-1U-NoLED | MX18 |
| 1 | W | MX_Only:MXOnly-1U-NoLED | MX8 |
| 1 | Win | MX_Only:MXOnly-1.25U-NoLED | MX7 |
| 1 | X | MX_Only:MXOnly-1U-NoLED | MX10 |
| 1 | Y | MX_Only:MXOnly-1U-NoLED | MX22 |
| 1 | Z | MX_Only:MXOnly-1U-NoLED | MX6 |
The 100 most common of 106 parts.
Similar boards
- 2 layers243.2 × 106 mm

- 2 layers228.4 × 85 mm

LeChiffre
tominabox1/Le-Chiffre-Keyboard
Great thanks goes to Jake at P3D for really making the case amazing and open sourcing his work. Check him out at P3Dstore.com
105 parts183GPL-3.0 - 2 layers228.6 × 76.8 mm

Schwann Rev0.5b
The-Royal/The_Royal_Open-Source-Projects
A Master Repository For All things Royal Made
127 parts159MIT - 2 layers30 × 65 mm

Keyboard mcu
dpapavas/lagrange-keyboard
A configurable, handwired, ergonomic keyboard
26 parts137AGPL-3.0 - 2 layers88.4 × 80 mm

LHS Controller PCB
dmcke5/ZenDeck
This is the second revision of my Mini PC based handheld Gaming PC! It is designed for a Beelink SER 5 Mini PC but could be adapted to other systems by changing the mounting brackets and outlet plate.
76 parts133CERN-OHL-S-2.0 - 2 layers259.5 × 89.1 mm

- 2 layers99.1 × 99.1 mm

Power supply panelized
thebiguno/microcontroller-projects
A home for a bunch of microcontroller projects which don't warrant their own repos.
223 parts75 - 2 layers323.9 × 95.1 mm

UnSplit
swiftrax/UnSplit
Ergo 40% mechanical keyboard with all components on the top with diodes arranged in an array
110 parts68GPL-2.0
Questions
How big is the PeopleMover PCB?
It measures 244.5 × 77.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PeopleMover use?
106 parts, built around the ATMEGA32U4-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PeopleMover KiCad files?
From the FionaCutler/PeopleMoverPCB repository on GitHub, at the commit this page was made from: the board is PeopleMover.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PeopleMover design in my own project?
Its repository states no licence, so its author keeps all rights: ask FionaCutler before reusing the design.