2 layers70.1 × 43.2 mm
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396
2 layers84 × 63 mm
Integrated Control Board RevA
Final-Resolution/AWTRIX-Motherboard12Integrated control board for AWTRIX
- Size
- 84 × 63 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 31
- Pads
- 80
- Tracks, vias
- 147, 5
- Pours
- 23
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Aug 2020
- Updated
- 23 Aug 2020
Overview
Integrated Control Board RevA is an open-source printed circuit board by Final-Resolution, from the Final-Resolution/AWTRIX-Motherboard repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 84 × 63 mm with 25 parts on 31 nets, routed with 147 tracks and 5 vias.
It is built around the WEMOS D1 MINI. Its parts include 12 ICs, 4 resistors, 2 capacitors and 1 switch. It belongs with the ESP8266 boards of this library.
Main components
1Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1K | Integrated-Control-Board-RevA:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
| 3 | Touch_Button_TTP223 | Integrated-Control-Board-RevA:PinHeader_1x03_P2.54mm | U7, U8, U9 |
| 1 | 1000uF | Integrated-Control-Board-RevA:CP_Radial_D8.0mm_P5.00mm | C1 |
| 1 | 100nF | Integrated-Control-Board-RevA:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 1 | BEM280-5V | Integrated-Control-Board-RevA:PinHeader_1x04_P2.54mm | U2 |
| 1 | DFPlayer_Mini | Integrated-Control-Board-RevA:DFPlayer | U5 |
| 1 | Gesture_Recognition | Integrated-Control-Board-RevA:PinHeader_1x05_P2.54mm | U11 |
| 1 | LDR_GL5528 | Integrated-Control-Board-RevA:PinHeader_1x02_P2.54mm | R4 |
| 1 | LOGO | A_LOGO:Final-Resolution-Silks | G*** |
| 1 | LOGO | A_LOGO:Final-Resolution-sy | G*** |
| 1 | LOGO | A_LOGO:Integrated_control_board | G*** |
| 1 | LOGO | A_LOGO:AWTRIX_small_Mask | G*** |
| 1 | LOGO | A_LOGO:REV_A_Mask | G*** |
| 1 | Matrix_8x32 | Integrated-Control-Board-RevA:PinHeader_1x03_P2.54mm | U12 |
| 1 | Power_3.3V | Integrated-Control-Board-RevA:PinHeader_1x02_P2.54mm | U3 |
| 1 | Power_5V | Integrated-Control-Board-RevA:PinHeader_1x02_P2.54mm | U4 |
| 1 | Power_IN_5V | Integrated-Control-Board-RevA:PinHeader_1x02_P2.54mm | U1 |
| 1 | Serial_Connection | Integrated-Control-Board-RevA:PinHeader_1x04_P2.54mm | U10 |
| 1 | Speaker | Integrated-Control-Board-RevA:PinHeader_1x02_P2.54mm | LS1 |
| 1 | Switch | Integrated-Control-Board-RevA:PinHeader_1x03_P2.54mm | SW1 |
| 1 | WeMos_D1_mini | Integrated-Control-Board-RevA:wemos-d1-mini-with-pin-header-and-connector | U6 |
Similar boards
- 2 layers37.6 × 29.3 mm
Romulator programmer interface
bitfixer/bf-romulator
Romulator - RAM/ROM replacement and debug for 6502 CPU systems
5 parts160 - 2 layers32.1 × 40.8 mm
Power Monitor Version 1
alcar21/WemosEM
Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)
8 parts122 - 2 layers91 × 49 mm
- 2 layers97.5 × 59.3 mm
Control Board
kholia/Easy-Digital-Beacons-v1
A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super extensible! Now comes with optional GPS support.
17 parts89 - 2 layers64.6 × 36.9 mm
Navien latest
htumanyan/navien
Navien water heater wire protocol for communication with NaviLink and other attached devices
30 parts65 - 2 layers49.5 × 30 mm
- 2 layers
Questions
How big is the Integrated Control Board RevA PCB?
It measures 84 × 63 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Integrated Control Board RevA use?
25 parts, built around the WEMOS D1 MINI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Integrated Control Board RevA KiCad files?
From the Final-Resolution/AWTRIX-Motherboard repository on GitHub, at the commit this page was made from: the board is Integrated-Control-Board-RevA/Integrated-Control-Board-RevA.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Integrated Control Board RevA design in my own project?
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).