
FRDM MCXN947 Shield Template
wavenumber-eng/frdm-templates
Starter templates for the NXP FRDM MCX

StepperDriver Shielf for the NXP FRDM-MCXA153 Board..
StepperDriver Shield FRDM MCXA153 is an open-source printed circuit board by Fi-schi, from the Fi-schi/StepperDriver-Shield_FRDM-MCXA153 repository on GitHub. It is a 4-layer board of 91.4 × 54.6 mm with 72 parts on 115 nets, routed with 583 tracks and 69 vias.
It is built around the 74LVC2G00GT, 100UF/35V and TMC2209, with the SSQ-108-03-T-D, SN74LXC2T45QDCURQ1 and SSQ-106-03-T-D among its other parts. Its parts include 23 connectors, 18 resistors, 11 capacitors, 5 diodes and 5 switches.
This is a shield for the FRDM-MCXA153 microcontroller, developed as part of my mechatronic course project at the Hochschule Wismar, University of Applied Sciences: Technology, Economy and Design.
The board acts as a carrier for the TMC-2209 stepper drivers and allows up to four stepper motors to be controlled simultaneously.
It is designed for 24V operation and has three freely programmable buttons, connections for four limit switches and a manual stepper driver enable circuit. In addition, by soldering a DC-DC converter to the microcontroller, it is possible to supply 24V through the shield.

| Qty. | Part | Size | Links |
|---|---|---|---|
| 7x | 0.1µF | 0805 | |
| 4x | 100µF/35V | 6.3mm | https://www.mouser.de/ProductDetail/661-EMZR350ARA101MF6 |
| 13x | 10KΩ | 0805 | |
| 4x | 100Ω | 0805 | |
| 1x | 1KΩ | 0805 | |
| 4x | TVS-Diode 3.3V | 0603 | https://www.mouser.de/ProductDetail/652-CG0603MLC-3.3LE |
| 1x | 74LVC2G00 | TSSOP-8 | https://www.mouser.de/ProductDetail/771-LVC2G00DP125 |
| 1x | SN74LXC2T45-Q1 | VSSOP | https://www.mouser.de/ProductDetail/595-74LXC2T45QDCURQ1 |
| 1x | WS2812B | ||
| 5x | Tactile Switch | 6x6mm | https://www.mouser.de/ProductDetail/710-430133050816 |
| 4x | 1x02 JST_XH | 2,54mm | |
| 4x | 1x04 JST_XH | 2,54mm | |
| 1x | 1x02 PinHeader | 2,54mm | |
| 8x | 1x03 PinHeader | 2,54mm | |
| 9x | Pin Header Jumper | 2,54mm | |
| 1x | AMASS XT60PW-M | ||
| 1x | 2x06 PinHeader (SSW-106-23-G-D) | 2,54mm | https://www.samtec.com/de/products/ssw-106-23-g-d |
| 1x | 2x08 PinHeader (SSW-108-23-G-D) | 2,54mm | https://www.samtec.com/de/products/ssw-108-23-g-d |
| 2x | 3x10 PinHeader (SSW-110-23-G-D) | 2,54mm | https://www.samtec.com/de/products/ssw-110-23-g-d |
| 4x | BTT TMC2019 Stepp Stick |
| Qty. | Part | Size | Links |
|---|---|---|---|
| 1x | DC/DC to 5v/500mA | SIP-3 | https://www.mouser.de/ProductDetail/919-R-78CK5.0-0.5 |
| 2x | 1µF/35V | 0603 |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R5, R7, R8, R10, R11, R13, R14, R16, R17, R18 |
| 8 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6, J7, J10, J11, J14, J15, J18, J19 |
| 4 | 0.1UF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C5, C7 |
| 4 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R9, R12, R15 |
| 4 | 100UF/35V | Capacitor_SMD:CP_Elec_6.3x7.7 | C2, C4, C6, C8 |
| 4 | Conn_01x02_Pin | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J8, J12, J16, J20 |
| 4 | Conn_01x04_Pin | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J9, J13, J17, J21 |
| 4 | D_TVS | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4 |
| 4 | Mechanical_MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | TMC2209 | Schrittmotortreiber:Btt_TMC2209_V1.3 | TMC1, TMC2, TMC3, TMC4 |
| 3 | 0.1µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10, C11 |
| 2 | SSQ-108-03-T-D | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J3, J4 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 74LVC2G00 | Package_SO:TSSOP-8_3x3mm_P0.65mm | U1 |
| 1 | Conn_01x02_Socket | XT60PW-M:AMASS_XT60PW-M | J1 |
| 1 | Conn_01x02_Socket | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J22 |
| 1 | DIS | Button:Takt_Schalter_Aliexpress | SW4 |
| 1 | EN | Button:Takt_Schalter_Aliexpress | SW5 |
| 1 | Home | Button:Takt_Schalter_Aliexpress | SW1 |
| 1 | SN74LXC2T45QDCURQ1_ | Pegelwandler:SN74LXC2T45QDCURQ1 | P1 |
| 1 | SSQ-106-03-T-D | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J2 |
| 1 | SSQ-110-03-T-D | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J5 |
| 1 | SW1 | Button:Takt_Schalter_Aliexpress | SW2 |
| 1 | SW2 | Button:Takt_Schalter_Aliexpress | SW3 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D5 |
| 1 | ~ | Fisch:Fischi | Blub1 |

wavenumber-eng/frdm-templates
Starter templates for the NXP FRDM MCX

Doly02/nxp-mcxn947-datalogger
Bachelor's Thesis - Digital Data Logger with Information Loss Prevention in Case of Power Failure

MiniNugen/Custom_Inverter_Hardware
PCBProjectNameREV1.PrjPCB | Source Documents | | PCBProjectNameREV1.SchDOC | | PCBProjectNameREV1.PcbDOC | | BOM | Settings | Libraries


TheContrappostoShop/Apollo
Control Board for the Prometheus mSLA Printer.

OpenBCI/Ganglion_Hardware_Design_Files
General repo for Ganglion hardware files

bkw777/aDIPters
PCBs to plug various newer SMT parts into vintage DIP sockets. Generaly to use a newer PLCC, SOIC, or TSOP EEPROM or Flash part to replace a DIP mask ROM or UV EPROM in a vintage computer.

It measures 91.4 × 54.6 mm and has 4 copper layers, 1.6 mm thick.
72 parts, built around the 74LVC2G00GT, 100UF/35V, TMC2209 and SSQ-108-03-T-D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Fi-schi/StepperDriver-Shield_FRDM-MCXA153 repository on GitHub, at the commit this page was made from: the board is Kicad - StepperDriver-Shield_FRDM-MCXA153/StepperDriver-Shield_FRDM-MCXA153.kicad_pcb and its schematic Kicad - StepperDriver-Shield_FRDM-MCXA153/EN_Logic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Fi-schi before reusing the design.