
TriComm Adapter New
FOSSEE/eSim_PCB_Design_Project_Files
This project is an STM32-based four-layer PCB designed for smart environmental monitoring and control in aquaculture systems.

This project is an STM32-based four-layer PCB designed for smart environmental monitoring and control in aquaculture systems.
SpectraSensesub is an open-source printed circuit board by FOSSEE, from the FOSSEE/eSim_PCB_Design_Project_Files repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 45.7 × 25.4 mm with 6 parts on 10 nets, routed with 40 tracks and 0 vias.
Its parts include 2 connectors, 1 capacitor, 1 resistor, 1 diode and 1 crystal.
This project is an STM32-based four-layer PCB designed for smart environmental monitoring and control in aquaculture systems. The board integrates the microcontroller, environmental sensor interfaces, power management, communication interfaces, and control circuitry required for monitoring and managing aquaculture conditions.
The board is designed as a four-layer PCB with the following stack-up:
The four-layer stack-up provides dedicated power and ground planes while allowing organized signal routing and improved power distribution. Component placement and routing were planned to maintain clear separation between sensitive environmental sensing signals and higher-current control paths.
The PCB is intended for aquaculture applications where environmental parameters can be monitored and controlled to help maintain suitable conditions for aquatic organisms. The STM32-based system provides the processing and control required to interface with sensors and connected control devices.
For the complete circuit description, PCB layout, routing methodology, design considerations, DRC results, and 3D views, refer to the accompanying project report.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P10.16mm_Horizontal | D1 |
| 1 | POWER_IN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | SENSOR_IN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | lm_741 | Package_DIP:DIP-8_W7.62mm | X1 |

FOSSEE/eSim_PCB_Design_Project_Files
This project is an STM32-based four-layer PCB designed for smart environmental monitoring and control in aquaculture systems.

FOSSEE/eSim_PCB_Design_Project_Files
This project is an STM32-based four-layer PCB designed for smart environmental monitoring and control in aquaculture systems.

FOSSEE/eSim_PCB_Design_Project_Files
This project is an STM32-based four-layer PCB designed for smart environmental monitoring and control in aquaculture systems.

FOSSEE/eSim_PCB_Design_Project_Files
This project is an STM32-based four-layer PCB designed for smart environmental monitoring and control in aquaculture systems.

FOSSEE/eSim_PCB_Design_Project_Files
This project is an STM32-based four-layer PCB designed for smart environmental monitoring and control in aquaculture systems.

FOSSEE/eSim_PCB_Design_Project_Files
This project is an STM32-based four-layer PCB designed for smart environmental monitoring and control in aquaculture systems.

FOSSEE/eSim_PCB_Design_Project_Files
This project is an STM32-based four-layer PCB designed for smart environmental monitoring and control in aquaculture systems.

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.


Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

It measures 45.7 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the FOSSEE/eSim_PCB_Design_Project_Files repository on GitHub, at the commit this page was made from: the board is SpectraSensesub/SpectraSensesub.kicad_pcb and its schematic LM386-Based_Microphone_Audio_Amplifier/LM386-Based_Microphone_Audio_Amplifier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).