
TriComm Adapter New
FOSSEE/eSim_PCB_Design_Project_Files
This project is an STM32-based four-layer PCB designed for smart environmental monitoring and control in aquaculture systems.

This project is an STM32-based four-layer PCB designed for smart environmental monitoring and control in aquaculture systems.
STM32 Env Monitor is an open-source printed circuit board by FOSSEE, from the FOSSEE/eSim_PCB_Design_Project_Files repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 93 × 44.4 mm with 59 parts on 58 nets, routed with 423 tracks and 76 vias.
It is built around the STM32F103C8T6, AMS1117-3.3 and AO3400A. Its parts include 20 resistors, 16 capacitors, 13 connectors, 3 diodes and 2 ICs. It belongs with the STM32 boards of this library.
This project is an STM32-based four-layer PCB designed for smart environmental monitoring and control in aquaculture systems. The board integrates the microcontroller, environmental sensor interfaces, power management, communication interfaces, and control circuitry required for monitoring and managing aquaculture conditions.
The board is designed as a four-layer PCB with the following stack-up:
The four-layer stack-up provides dedicated power and ground planes while allowing organized signal routing and improved power distribution. Component placement and routing were planned to maintain clear separation between sensitive environmental sensing signals and higher-current control paths.
The PCB is intended for aquaculture applications where environmental parameters can be monitored and controlled to help maintain suitable conditions for aquatic organisms. The STM32-based system provides the processing and control required to interface with sensors and connected control devices.
For the complete circuit description, PCB layout, routing methodology, design considerations, DRC results, and 3D views, refer to the accompanying project report.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1k5 | Resistor_SMD:R_0603_1608Metric | R1, R3, R4, R5, R6, R17, R18 |
| 4 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C5, C6, C7 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R12, R14, R16 |
| 3 | 100nf | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C11, C14, C15 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R19, R20, R21 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C12, C13 |
| 2 | 1N5822 | Diode_THT:D_DO-201AE_P3.81mm_Vertical_AnodeUp | D2, D3 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C9, C10 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 100nf | Capacitor_SMD:C_0402_1005Metric | C16 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C8 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 120R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 12K | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1K5 | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 27K | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 4.8k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | AIR_PUMP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Molex_47219-2001 | J13 |
| 1 | PH_SENSOR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | PUMP_PWR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | SSD1306_OLED | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J12 |
| 1 | STM32F103C8T6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521 | J4 |
| 1 | WATER_PUMP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | debugging | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | temp sensor | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | turbidity module | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | water level | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |

FOSSEE/eSim_PCB_Design_Project_Files
This project is an STM32-based four-layer PCB designed for smart environmental monitoring and control in aquaculture systems.

FOSSEE/eSim_PCB_Design_Project_Files
This project is an STM32-based four-layer PCB designed for smart environmental monitoring and control in aquaculture systems.

FOSSEE/eSim_PCB_Design_Project_Files
This project is an STM32-based four-layer PCB designed for smart environmental monitoring and control in aquaculture systems.

FOSSEE/eSim_PCB_Design_Project_Files
This project is an STM32-based four-layer PCB designed for smart environmental monitoring and control in aquaculture systems.

FOSSEE/eSim_PCB_Design_Project_Files
This project is an STM32-based four-layer PCB designed for smart environmental monitoring and control in aquaculture systems.

FOSSEE/eSim_PCB_Design_Project_Files
This project is an STM32-based four-layer PCB designed for smart environmental monitoring and control in aquaculture systems.

FOSSEE/eSim_PCB_Design_Project_Files
This project is an STM32-based four-layer PCB designed for smart environmental monitoring and control in aquaculture systems.

JackToaster/pressure-sensor-interface
8x pressure sensor and 8x solenoid valve USB interface

DsThakurRawat/PCB-AND-CHIP-DESIGN-WITH-AIML
All production files have been generated in manufacturing/: - Gerber Layers (RS-274X): Copper, solder masks, silkscreen, and board edge cuts (manufacturing/gerbers/) - Excellon Drill Files: Plated and non-plated drill…

laforestlabs/KiCraft
KiCad PCB automation toolkit — placement, routing, scoring, and experiment management


DziadekMateusz/Walking_spider_robot_PCB
Custom control board for a spider robot. Based on the STM32F103C8T6 microcontroller. Features dedicated 5V power supplies for eight servo motors, USB-C programming, Li-Po 2S power input, onboard protection circuits…


Queens-Rocket-Engineering-Team/Avionics-23-26
QRET Avionics hardware, firmware, and documentation for 2023 to 2025.

hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain
It measures 93 × 44.4 mm and has 4 copper layers, 1.6 mm thick.
59 parts, built around the STM32F103C8T6, AMS1117-3.3 and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the FOSSEE/eSim_PCB_Design_Project_Files repository on GitHub, at the commit this page was made from: the board is STM32-Env-Monitor-PCB/STM32_Env_Monitor.kicad_pcb and its schematic LM386-Based_Microphone_Audio_Amplifier/LM386-Based_Microphone_Audio_Amplifier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).