

- Size
- 99 × 88 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 538
- Nets
- 448
- Pads
- 1,498
- Tracks, vias
- 4,200, 328
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 Aug 2024
- Updated
- 28 Aug 2024
Overview
Panel is an open-source printed circuit board by Eymeric65, from the Eymeric65/CO2_Portable_sensor_main repository on GitHub. It is a 2-layer board of 99 × 88 mm with 538 parts on 448 nets, routed with 4,200 tracks and 328 vias.
It is built around the STM32L031F6P7, SCD40-D-R2 and CR2032. Its parts include 144 capacitors, 48 resistors, 32 transistors, 24 diodes and 24 connectors. It belongs with the STM32 boards of this library.
Main components
3STM32L031F6P7
TSSOP-20-40℃~+105℃ 1.8V~3.6V 12bit 15 1KB 32 Bit 32KB 32MHz 8KB ARM Cortex-M0+ Built-in FLASH TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)SCD40-D-R2
LGA-20(10.1x10.1)-10℃~+60℃ 10.1mm 10.1mm 15mA 2.4V~5.5V 400ppm~2000ppm 6.5mm Air quality I2C Reset function ±5% LGA-20(10.1x10.1) Gas Sensors ROHSSensirionGas SensorsCR2032
-- Unclassified goods ROHSMaxellUncategorised
README
README.mdCO2_Portable_sensor_main
Parts
538| Qty | Value | Footprint | References |
|---|---|---|---|
| 212 | NPTH | NPTH | KiKit_MB_10_1, KiKit_MB_10_2, KiKit_MB_10_3, KiKit_MB_10_4, KiKit_MB_11_1, KiKit_MB_11_2, KiKit_MB_11_3, KiKit_MB_11_4, KiKit_MB_12_1, KiKit_MB_12_2, KiKit_MB_12_3, KiKit_MB_12_4, KiKit_MB_13_1, KiKit_MB_13_2, KiKit_MB_13_3, KiKit_MB_13_4 +196 |
| 72 | 1u | Capacitor_SMD:C_0603_1608Metric | C10, C10, C10, C10, C10, C10, C10, C10, C11, C11, C11, C11, C11, C11, C11, C11 +56 |
| 40 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C13, C13, C13, C13, C13, C13, C13, C13, C14, C14, C14, C14, C14, C14, C14, C14 +24 |
| 32 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R2, R2, R2, R2, R2, R2, R2, R10, R10, R10, R10, R10, R10, R10, R10 +16 |
| 24 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C1, C1, C1, C1, C1, C1, C1, C1, C17, C17, C17, C17, C17, C17, C17, C17 +8 |
| 24 | D | Diode_SMD:D_SOD-123 | D1, D1, D1, D1, D1, D1, D1, D1, D2, D2, D2, D2, D2, D2, D2, D2 +8 |
| 24 | PMOS | Package_TO_SOT_SMD:SOT-23 | Q2, Q2, Q2, Q2, Q2, Q2, Q2, Q2, Q3, Q3, Q3, Q3, Q3, Q3, Q3, Q3 +8 |
| 8 | 0.47 | Resistor_SMD:R_0603_1608Metric | R4, R4, R4, R4, R4, R4, R4, R4 |
| 8 | 10n | Capacitor_SMD:C_0603_1608Metric | C12, C12, C12, C12, C12, C12, C12, C12 |
| 8 | 10u | CO2_Sensor_Footprint:SRN3015 | L1, L1, L1, L1, L1, L1, L1, L1 |
| 8 | 1M | Resistor_SMD:R_0603_1608Metric | R1, R1, R1, R1, R1, R1, R1, R1 |
| 8 | CR2032 | CO2_Sensor_Footprint:SMTM1225 | BT1, BT1, BT1, BT1, BT1, BT1, BT1, BT1 |
| 8 | CircuitBreaker_1P | CO2_Sensor_Footprint:TL3780AF240QG | CB1, CB1, CB1, CB1, CB1, CB1, CB1, CB1 |
| 8 | Conn_01x05_Pin | Connector_PinHeader_2.00mm:PinHeader_1x05_P2.00mm_Vertical | J1, J1, J1, J1, J1, J1, J1, J1 |
| 8 | FPC24 (0.5mm) | Connector_FFC-FPC:TE_2-1734839-4_1x24-1MP_P0.5mm_Horizontal | J2, J2, J2, J2, J2, J2, J2, J2 |
| 8 | Micro_SD_Card | CO2_Sensor_Footprint:MSD1A | J3, J3, J3, J3, J3, J3, J3, J3 |
| 8 | NMOS | Package_TO_SOT_SMD:SOT-23 | Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1 |
| 8 | SCD40-D-R2 | CO2_Sensor_Footprint:SCD40DR2 | 1, 1, 1, 1, 1, 1, 1, 1 |
| 8 | STM32L031F6P7 | CO2_Sensor_Footprint:SOP65P640X120-20N | IC1, IC1, IC1, IC1, IC1, IC1, IC1, IC1 |
| 8 | Val** | CO2_Sensor_Footprint:drawing | Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref**, Ref** |
| 6 | Fiducial | Fiducial | KiKit_FID_B_1, KiKit_FID_B_2, KiKit_FID_B_3, KiKit_FID_T_1, KiKit_FID_T_2, KiKit_FID_T_3 |
More from Eymeric65/CO2_Portable_sensor_main
2- 2 layers42 × 20.5 mm

- 2 layers42 × 20.5 mm

Similar boards
- 2 layers32 × 44 mm

- 2 layers50 × 50 mm

- 4 layers13.6 × 19.4 mm

- 4 layers100 × 75 mm

OpenAirScope
emertcakir/OpenAirScope
Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.
282 parts26MIT - 2 layers10.3 × 17 mm

Watchy scd40
cscott/watchy-co2-pcb
Simple PCB to mount the Sensirion SCD40 CO2 sensor next to Watchy
12 parts13 - 2 layers42.4 × 94 mm

- 2 layers106 × 58.5 mm

CO2 Monitor SMD
romkey/pdxhackerspace-portable-co2-monitor
Open source hardware and software portable CO2/air quality monitor
28 parts3MIT - 2 layers95.3 × 34 mm

GasSensor
Daniel-Abdi/Matter-CO2-AirQuality-Sensor
Create an ESP32-C6 based air quality sensor for Matter. Grab CO2 concentration in real time and update in any Matter compatible app.
22 parts2
Questions
How big is the Panel PCB?
It measures 99 × 88 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Panel use?
538 parts, built around the STM32L031F6P7, SCD40-D-R2 and CR2032. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panel KiCad files?
From the Eymeric65/CO2_Portable_sensor_main repository on GitHub, at the commit this page was made from: the board is PCB/CO2_sensor/Panel.kicad_pcb and its schematic PCB/CO2_sensor/CO2_sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panel design in my own project?
Its repository states no licence, so its author keeps all rights: ask Eymeric65 before reusing the design.