
Control Board
EthicalEarth/Si4735_Extension_Board
There you can find PCB-Projects to build a control and front boards for SI4735 Radio.

There you can find PCB-Projects to build a control and front boards for SI4735 Radio.
Control Board is an open-source printed circuit board by EthicalEarth, from the EthicalEarth/Si4735_Extension_Board repository on GitHub. It is a 2-layer board of 93 × 57 mm with 39 parts on 30 nets, routed with 378 tracks and 9 vias.
It is built around the TDA1517P/N3 and PN2222A. Its parts include 18 resistors, 8 capacitors, 7 connectors, 3 transistors and 2 ICs.
There you can find PCB-Projects to build a control and front boards for SI4735 Radio. Please be careful, these Projects are absolutely alpha-version. The circuits can be wrong or have mistake..
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 2k | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R4, R7, R9 |
| 5 | 4.7k | Resistor_SMD:R_1206_3216Metric | R5, R13, R14, R17, R18 |
| 3 | 0.2uF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C2, C3, C6 |
| 3 | 10k | Resistor_SMD:R_1206_3216Metric | R6, R8, R10 |
| 3 | PN2222A | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q3 |
| 2 | 1000uF | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C4, C5 |
| 2 | 100k | Resistor_SMD:R_1206_3216Metric | R15, R16 |
| 2 | 100nF | Capacitor_SMD:C_1206_3216Metric | C7, C8 |
| 2 | 3k | Resistor_SMD:R_1206_3216Metric | R11, R19 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 1N914 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | Audio out | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J6 |
| 1 | Conn_01x03_Male | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J4 |
| 1 | Control BUS | Connector_PinSocket_2.54mm:PinSocket_1x11_P2.54mm_Vertical | J1 |
| 1 | Control BUS | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Jack 3.5 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J7 |
| 1 | Radio Power | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | Speaker | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5 |
| 1 | TCA9517DR | PCA9517:SOIC127P599X175-8N | U1 |
| 1 | TDA1517P | TDA1517:DIP254P762X470-18 | U4 |

EthicalEarth/Si4735_Extension_Board
There you can find PCB-Projects to build a control and front boards for SI4735 Radio.

EthicalEarth/Radio_SI4735_v1.0_stable
Stable final release of DSP Radio based on si4735 chip.

skiselev/micro_8088
Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset

Staacks/there.oughta.be
Projects featured on my blog at https://there.oughta.be


plusvic/simplebus2-intercom
General description of the Simplebus2 protocol used by some Comelit's intercoms. Hardware for retransmitting Simplebus2 messages over UART.



It measures 93 × 57 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the TDA1517P/N3 and PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the EthicalEarth/Si4735_Extension_Board repository on GitHub, at the commit this page was made from: the board is Control_Board.kicad_pcb and its schematic Control_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask EthicalEarth before reusing the design.