

This filter based on construction pu2clr from https://github.com/pu2clr/auto_bpf_arduino/ .
- Size
- 85.5 × 49 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 34
- Pads
- 148
- Tracks, vias
- 417, 7
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 5 Nov 2023
- Updated
- 23 Mar 2024
Overview
Filter is an open-source printed circuit board by EthicalEarth, from the EthicalEarth/Electronically_Switched_Filter_4_Band repository on GitHub. It is a 2-layer board of 85.5 × 49 mm with 53 parts on 34 nets, routed with 417 tracks and 7 vias.
It is built around the SN74CBT3253D. Its parts include 21 capacitors, 12 resistors, 12 inductors, 3 connectors and 2 ICs.
Main components
1README
README.mdThis filter based on construction pu2clr from https://github.com/pu2clr/auto_bpf_arduino/ .

Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitor_SMD:C_1206_3216Metric | C15, C16, C17, C18, C19, C20, C21 |
| 6 | 2.2k | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R4, R11, R12 |
| 4 | 180pF | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C9, C11, C12, C14 |
| 4 | 390pF | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C2, C4, C6, C8 |
| 4 | 75R | Resistor_SMD:R_1206_3216Metric | R6, R7, R8, R10 |
| 2 | 0.46uH | Inductor_THT:L_Toroid_Horizontal_D6.5mm_P10.00mm_Diameter7-5mm_Amidon-T25 | L10, L12 |
| 2 | 120R | Resistor_SMD:R_1206_3216Metric | R5, R9 |
| 2 | 1500pF | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C3, C7 |
| 2 | 160pF | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C10, C13 |
| 2 | 1uH | Inductor_THT:L_Toroid_Horizontal_D6.5mm_P10.00mm_Diameter7-5mm_Amidon-T25 | L7, L9 |
| 2 | 47nF | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C1, C5 |
| 2 | 5.5uH | Inductor_THT:L_Toroid_Horizontal_D7.8mm_P13.00mm_Diameter9-5mm_Amidon-T30 | L1, L3 |
| 2 | BN-43-2402 | Transformer_THT:Transformer_Toroid_Horizontal_D9.0mm_Amidon-T30 | T1, T2 |
| 2 | Conn_Coaxial | Connector_Coaxial:SMA_Amphenol_901-143_Horizontal | J1, J4 |
| 2 | SN74CBT3253 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U1, U2 |
| 1 | 0.13uH | Inductor_THT:L_Toroid_Horizontal_D6.5mm_P10.00mm_Diameter7-5mm_Amidon-T25 | L11 |
| 1 | 0.27uH | Inductor_THT:L_Toroid_Horizontal_D6.5mm_P10.00mm_Diameter7-5mm_Amidon-T25 | L8 |
| 1 | 0.46uH | Inductor_THT:L_Toroid_Horizontal_D7.8mm_P13.00mm_Diameter9-5mm_Amidon-T30 | L5 |
| 1 | 2.0uH | Inductor_THT:L_Toroid_Horizontal_D7.8mm_P13.00mm_Diameter9-5mm_Amidon-T30 | L6 |
| 1 | 2.6uH | Inductor_THT:L_Toroid_Horizontal_D7.8mm_P13.00mm_Diameter9-5mm_Amidon-T30 | L2 |
| 1 | 2uH | Inductor_THT:L_Toroid_Horizontal_D7.8mm_P13.00mm_Diameter9-5mm_Amidon-T30 | L4 |
| 1 | Conn_01x04_Pin | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | SW_DIP_x02 | Button_Switch_SMD:SW_DIP_SPSTx02_Slide_6.7x6.64mm_W8.61mm_P2.54mm_LowProfile | SW1 |
Similar boards
- 2 layers101.6 × 137.4 mm

- 2 layers97 × 79.5 mm

MBRadioDual2
LadyRoninEngineer/Si473x
Data Supporting development of Si473x series radios
104 parts35Unlicense - 2 layers81.3 × 33.7 mm

SDRReciever
Dizzerin/Software-Defined-Radio
Quadrature sampling down converter software defined radio
67 parts24 - 2 layers79.8 × 23.9 mm

- 2 layers100 × 80 mm

DeltaSDR
cernohorsky/DeltaSDR
HF Software Defined Radio Transceiver that includes ADC and DAC circuits. No soundcard is needed. Board communicates only trough one USB cable.
180 parts9 - 2 layers100 × 100 mm

SDRReciever
KonradMcClure/SDR_Receiver
Software Defined Radio Receiver designed together with Caleb Froelich (https://github.com/froeca) for our Walla Walla University Electronics II project.
78 parts7 - 4 layers81.1 × 75 mm

Brs flight computer
Big-Red-Sat/Big-Red-Sat-1
This repository contains the designs for the Big Red Sat-1, a 1U CubeSat examining the performance of perovskite solar cells in low earth orbit.
266 parts6 - 2 layers74 × 72.1 mm

ENGR357 Project v1.1
pricna/Software-Defined-Radio-Receiver
Software Defined Radio receiver created for Engineering Electronics II at Walla Walla University.
80 parts3MPL-2.0
Questions
How big is the Filter PCB?
It measures 85.5 × 49 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Filter use?
53 parts, built around the SN74CBT3253D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Filter KiCad files?
From the EthicalEarth/Electronically_Switched_Filter_4_Band repository on GitHub, at the commit this page was made from: the board is Filter.kicad_pcb and its schematic Filter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Filter design in my own project?
Its repository states no licence, so its author keeps all rights: ask EthicalEarth before reusing the design.