
Aqi monitor
wngxp/aqi-monitor
A custom indoor air-quality monitor with particulate, carbon-dioxide, temperature, humidity, and pressure sensing; a round color display; a nine-pixel status gauge; and an optional connected backend and mobile app.

Welcome to this project that combines hardware design, embedded firmware, and application-level software. The project is a portable weather station that gets temperature, humidity, pressure and show on a dashboard.
WeatherStation is an open-source printed circuit board by ErikMiyoshi, from the ErikMiyoshi/WeatherStation repository on GitHub, published under the MIT licence. It is a 2-layer board of 67 × 40 mm with 79 parts on 97 nets, routed with 472 tracks and 103 vias.
It is built around the TLV62569DBV, TP4056-42-ESOP8 and MMBT3904. Its parts include 27 resistors, 19 capacitors, 7 ICs, 7 diodes and 3 transistors. It belongs with the home automation and IoT boards of this library.
Welcome to this project that combines hardware design, embedded firmware, and application-level software. The project is a portable weather station that gets temperature, humidity, pressure and show on a dashboard.
This is a personal project for me to learning all aspects of an embedded system project that involves:
The objective is to understand how these layers connect, and how to manage a multidisciplinary project effectively.
WeatherStation/ ├── HW/ # Schematics, PCB design files (KiCad, etc.) ├── FW/ # Embedded C/C++ code (e.g., ESP-IDF) ├── SW/ # Python, Flask, GUI application (e.g., dashboard) ├── docs/ # Documentation, diagrams, and learning notes ├── LICENSE └── README.md
| Layer | Technology |
|---|---|
| Hardware | KiCad, breadboards, ESP32, sensors |
| Firmware | C, C++, ESP-IDF, MQTT |
| Software | Python, Flask, MQTT, Chart.js |
| Tools | Git, VSCode, KiCad, esp-idf |
This is a learning project. Contributions are welcome! Feel free to open issues, suggest improvements, or ask questions. The goal is to learn collaboratively.
I'm not the best at programming and this project is also for me to improve my ability in writing code.
This project is licensed under the MIT License. See LICENSE for details.
Created by Erik as a personal journey to explore full-stack embedded systems.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R10, R12, R14, R16, R17, R18, R19, R24, R25 |
| 9 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C5, C7, C9, C11, C14, C16, C18, C19 |
| 6 | 12k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R5, R9, R11, R26, R27 |
| 4 | 22u | Capacitor_SMD:C_0805_2012Metric | C2, C13, C15, C17 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D4, D5, D6, D7 |
| 4 | MountingHole | weather_station_lib:mounting_hole_2 | H1, H2, H3, H4 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R13, R15 |
| 3 | SW_Push | weather_station_lib:tactile_switch_6x6 | SW1, SW2, SW3 |
| 3 | TestPoint | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP1, TP2, TP3 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C3, C6 |
| 2 | 1n | Capacitor_SMD:C_0603_1608Metric | C4, C8 |
| 2 | 470k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R7 |
| 2 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C10, C12 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R6 |
| 2 | D_Schottky | Diode_SMD:D_SMA | D1, D2 |
| 2 | MMBT3904 | weather_station_lib:SOT-23_(pins_12_inverted) | Q2, Q3 |
| 2 | TestPoint_2Pole | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | TP4, TP5 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22 |
| 1 | 2u2 | weather_station_lib:Inductor_4.5x4.1x2 | L1 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23 |
| 1 | Ai-Thinker-Ra-02 | weather_station_lib:Ai-Thinker-Ra-01-LoRa_no_paste | U5 |
| 1 | CP2102N-Axx-xQFN28 | weather_station_lib:QFN-28-1EP_5x5mm_P0.5mm_EP2.7x2.7mm_ThermalVias_via_0.3mm | U7 |
| 1 | PMOS | weather_station_lib:SOT-23_(pins_inverted) | Q1 |
| 1 | TLV62569 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | TP4056-42-ESOP8 | weather_station_lib:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias_via_0.3mm | U3 |
| 1 | TestPoint_2Pole | TestPoint:TestPoint_2Pads_Pitch5.08mm_Drill1.3mm | TP6 |
| 1 | USB_C_Receptacle_USB2.0_16P | weather_station_lib:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal_fix_clearance | J1 |
| 1 | ~ | Package_TO_SOT_SMD:SOT-143 | D3 |
| 1 | ~ | weather_station_lib:0.96inch_lcd | U6 |
| 1 | ~ | weather_station_lib:Header_7x2.54_smt | X1 |
| 1 | ~ | weather_station_lib:ESP32-WROOM-32 or ESP32S_no_paste | U1 |
| 1 | ~ | weather_station_lib:BMP280_AHT20 | U4 |

wngxp/aqi-monitor
A custom indoor air-quality monitor with particulate, carbon-dioxide, temperature, humidity, and pressure sensing; a round color display; a nine-pixel status gauge; and an optional connected backend and mobile app.

nguyencanhanh/luckfox-rv1103-drone
AI quadcopter on one RV1103 (Luckfox Pico Mini B): Linux + RISC-V MCU flight loop, SITL with 3D pilot view, KiCad flight-controller board


houseofthe051010/ESP32-Walkie-Talkie-V2
This ESP32 Walkie Talkie is redesigned with a SX1262 radio, a PCB, and a full case redesign.

atomicra1n/wifi-geiger-counter
A DIY Geiger counter PCB which can detect ionizing radiation and log readings over Wi-Fi. Built with an ESP32, and a HV multiplier circuit that steps up 3.7V to 400V for the GM tube.

KazimGL/ESP32-PowerIoT-DevBoard
ESP32 battery-powered IoT dev board with Li-ion charging, protection, and sensor support — designed in KiCad


ZharbolatDinmukhamed/Haptic-Glove-PCB
A wrist-mounted PCB for a haptic feedback glove, developed as part of my Research Assistantship at the Tactile Laboratory, Nazarbayev University.
It measures 67 × 40 mm and has 2 copper layers, 1.6 mm thick.
79 parts, built around the TLV62569DBV, TP4056-42-ESOP8 and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ErikMiyoshi/WeatherStation repository on GitHub, at the commit this page was made from: the board is HW/weather_station/weather_station.kicad_pcb and its schematic HW/weather_station/weather_station.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).