

4k mania keypad
- Size
- 112 × 45 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 69
- Pads
- 251
- Tracks, vias
- 388, 23
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 16 Feb 2023
- Updated
- 25 Jan 2024
Overview
4k mania keypad is an open-source printed circuit board by Entropy-10, from the Entropy-10/4k-mania-keypad repository on GitHub. It is a 2-layer board of 112 × 45 mm with 47 parts on 69 nets, routed with 388 tracks and 23 vias.
It is built around the RP2040, W25Q128JVSIQ and SRV05-4, with the XC6206-2.8V and EC11E18244A5 among its other parts. Its parts include 15 capacitors, 7 switches, 6 resistors, 6 diodes and 5 connectors. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Main components
5RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHSRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)XC6206-2.8V
SOT-23-3L-40℃~+85℃@(Ta) 1 1uA 2.8V 250mA 350mV@(30mA) 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsEC11E18244A5
插件插件 Rotary Encoders ROHSALPSALPINERotary Encoders
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C6, C7, C8, C9, C10, C11, C13, C14 |
| 6 | d | Diode_SMD:D_0402_1005Metric | D1, D2, D3, D4, D5, D6 |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C12, C15 |
| 4 | MX_SW_HS | marbastlib-mx:SW_MX_HS_1u | SW3, SW4, SW5, SW6 |
| 4 | Pico Ezmate | Connector_Molex:Molex_Pico-EZmate_78171-0003_1x03-1MP_P1.20mm_Vertical | J2, J3, J4, J5 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 27.4 | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | 27pF | Capacitor_SMD:C_0402_1005Metric | C4, C5 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | EC11E18244A5 | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1, SW2 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | RP2040 | Footprints:RP2040-QFN-56 | U1 |
| 1 | SRV05-4 | marbastlib-various:SOT-23-6-routable | U2 |
| 1 | SW_Push | random-keyboard-parts:SKQG-1155865 | SW7 |
| 1 | USB_C_Receptacle_USB2.0 | marbastlib-various:USB_C_Receptacle_HRO_TYPE-C-31-M-14 | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U4 |
| 1 | XC6206 | Package_TO_SOT_SMD:SOT-23-3 | U3 |
The 45 most common of 47 parts.
Similar boards
- 2 layers253.3 × 113.3 mm

- 2 layers344.7 × 123.6 mm

- 2 layers103.2 × 107.2 mm

Blue team pad
fearherbs1/blue-team-pad
An open source macropad for the cyber security analyst.
82 parts6GPL-3.0 - 2 layers344.7 × 123.6 mm

- 2 layers347.7 × 125.4 mm

- 2 layers444.1 × 145.3 mm

Gh80-3003
Alectardy98/PCB_G803003_reduxal
Open-sourced Cherry MX PCB using the Pi Pico (RP2040) for the Cherry G80 3001 line of keyboards. Stock keyboards shipped originally with Cherry MY switches.
362 partsCC-BY-SA-4.0 - 2 layers74.8 × 99.8 mm

- 2 layers131.2 × 132.5 mm

Questions
How big is the 4k mania keypad PCB?
It measures 112 × 45 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 4k mania keypad use?
47 parts, built around the RP2040, W25Q128JVSIQ, SRV05-4 and XC6206-2.8V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 4k mania keypad KiCad files?
From the Entropy-10/4k-mania-keypad repository on GitHub, at the commit this page was made from: the board is 4k-mania-keypad.kicad_pcb and its schematic 4k-mania-keypad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 4k mania keypad design in my own project?
Its repository states no licence, so its author keeps all rights: ask Entropy-10 before reusing the design.