

FloppyOverdrive ControlBoard
A revival of the floppy disk drive and controller for modern computers.
- Size
- 163 × 104 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 136
- Pads
- 389
- Tracks, vias
- 885, 35
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 23 Oct 2022
- Updated
- 7 Apr 2023
Overview
FloppyOverdrive ControlBoard is an open-source printed circuit board by Emu-gators, from the Emu-gators/floppy-overdrive repository on GitHub. It is a 2-layer board of 163 × 104 mm with 78 parts on 136 nets, routed with 885 tracks and 35 vias.
It is built around the ULN2003. Its parts include 25 resistors, 10 connectors, 9 capacitors, 7 ICs and 4 diodes. It belongs with the FPGA and CPLD boards of this library.
Main components
1README
README.mdfloppy-overdrive
Overview
A revival of the floppy disk drive and controller for modern computers. Sending floppies into overdrive!
Organization
The project is laid out with the following directories:
docs: relevant project documentation and research resourceshw: HDL code and testbenchespcb: KiCad project for the control circuit PCBpcb_tests: Test code and procedures for the control circuit PCBsw: software code and scripts
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_0402_1005Metric | R16, R17, R20, R21, R24, R25 |
| 5 | 0.1u | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2, C5, C6, C7 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R18, R19, R22, R23 |
| 4 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R9 |
| 4 | 510 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12, R13, R14, R15 |
| 3 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R7, R11 |
| 2 | 33u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C3, C4 |
| 2 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R10 |
| 2 | 47u | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C8, C9 |
| 2 | FerriteBead | Resistor_SMD:R_1206_3216Metric | FB1, FB2 |
| 2 | THS4521IDR | MAX660MX⁄NOPB:SOIC127P600X175-8N | IC1, IC2 |
| 2 | TXB0108-PW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1, U2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 174804-1 | 174804-1:1748041 | J1 |
| 1 | 22k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | FPGA_IO_Header | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J8 |
| 1 | Flop_ADC_Header | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | Floppy_Bus | Connector_PinHeader_2.54mm:PinHeader_2x17_P2.54mm_Vertical | J3 |
| 1 | HeadNeg_Sel | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP3 |
| 1 | HeadOut_Header | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J9 |
| 1 | HeadPos_Sel | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP2 |
| 1 | Heads_Header | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Horizontal | J5 |
| 1 | IceWerx FPGA | IceWerx:IceWerx FPGA | U4 |
| 1 | LED1 | LED_THT:LED_D5.0mm | D1 |
| 1 | LED2 | LED_THT:LED_D5.0mm | D2 |
| 1 | LED3 | LED_THT:LED_D5.0mm | D3 |
| 1 | LED4 | LED_THT:LED_D5.0mm | D4 |
| 1 | LED_Enable | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | MAX660MX_NOPB | MAX660MX⁄NOPB:SOIC127P600X175-8N | IC3 |
| 1 | Motor_Header | 440055-4:SHDRRA4W50P15X200_1X4_1000X770X525P | J2 |
| 1 | PIC_ADC_Header | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J7 |
| 1 | RST_Btn | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Sensor_Header | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Horizontal | J4 |
| 1 | Step_Header | Connector_PinHeader_2.00mm:PinHeader_2x05_P2.00mm_Horizontal | J6 |
| 1 | TP_-2V5 | TestPoint:TestPoint_Pad_D1.0mm | TP16 |
| 1 | TP_12V | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | TP_2V5 | TestPoint:TestPoint_Pad_D1.0mm | TP17 |
| 1 | TP_3V3 | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | TP_5V | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | TP_Coil1 | TestPoint:TestPoint_Pad_D1.0mm | TP12 |
| 1 | TP_Coil2 | TestPoint:TestPoint_Pad_D1.0mm | TP14 |
| 1 | TP_Coil3 | TestPoint:TestPoint_Pad_D1.0mm | TP13 |
| 1 | TP_Coil4 | TestPoint:TestPoint_Pad_D1.0mm | TP15 |
| 1 | TP_Disk | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | TP_Index | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | TP_Index5V | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | TP_Read5V | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | TP_Track0 | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | TP_Track05V | TestPoint:TestPoint_Pad_D1.0mm | TP11 |
| 1 | TP_WP | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | TP_WP5V | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | ULN2003 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U3 |
Similar boards
- 4 layers99.6 × 76.2 mm

- 2 layers31 × 64 mm

Power driver
jmfriedt/SDR-GB-SAR
Opensource, openhardware implementation of a Software Defined Radio (SDR) Ground Based Synthetic-Aperture RADAR (GB-SAR)
6 parts70 - 2 layers160 × 100 mm

MPCNC Nano Estlcam Shield
tnn85/MPCNC-Nano-Estlcam-Shield
Ein CNC Shield für die MPCNC in Verwendung mit Estlcam
96 parts70 - 2 layers42.5 × 43.2 mm

ElectronicFocuser
jlecomte/ascom-oag-focuser
Open Source ASCOM-Compatible OAG Focuser For Astrophotography
4 parts55MIT - 4 layers100 × 49.8 mm

- 2 layers134 × 91 mm

- 2 layers75 × 60 mm

DUTler V2
TheYoctoJester/dutler
A bench butler for your Device Under Test: turns a Raspberry Pi Pico into a USB-serial console bridge with power-relay and MOSFET strap/reset control for embedded-Linux bring-up and hardware-in-the-loop.
54 parts23Apache-2.0 - 4 layers76 × 82.5 mm

Nucleo64 CNC
terjeio/CNC_Breakout_Nucleo64
CNC breakout for STM324F411 and ST32F446 development boards
120 parts22
Questions
How big is the FloppyOverdrive ControlBoard PCB?
It measures 163 × 104 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FloppyOverdrive ControlBoard use?
78 parts, built around the ULN2003. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FloppyOverdrive ControlBoard KiCad files?
From the Emu-gators/floppy-overdrive repository on GitHub, at the commit this page was made from: the board is pcb/FloppyOverdrive_ControlBoard.kicad_pcb and its schematic pcb/FloppyOverdrive_ControlBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FloppyOverdrive ControlBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask Emu-gators before reusing the design.