Skip to the content
6 layers55 × 84.1 mmMmWave radarBoard, the printed circuit board in 3D

General purpose radar PCB based around the IWRL6432AOP radar chip made by TI

Size
55 × 84.1 mm
Copper layers
6
Thickness
1 mm
Parts
275
Nets
197
Pads
844
Tracks, vias
1,091, 165
Pours
12
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
12 Apr 2025
Updated
10 Nov 2025

Overview

MmWave radarBoard is an open-source printed circuit board by EmielV2002, from the EmielV2002/mmWave-radarBoard repository on GitHub, published under the MIT licence. It is a 6-layer board of 55 × 84.1 mm with 275 parts on 197 nets, routed with 1,091 tracks and 165 vias.

It is built around the MX25R1635FZUIH0, PMEG3020ER and BSS123, with the NUP2105L among its other parts. Its parts include 100 resistors, 99 capacitors, 12 diodes, 8 connectors and 6 ICs. It belongs with the interfaces and adapters and sensors and measurement boards of this library.

Main components

4

README

README.md

mmWave-radarBoard

This is project is still work-in-progress!

Parts

275
QtyValueFootprintReferences
2110kResistor_SMD:R_0402_1005MetricR17, R19, R27, R33, R35, R36, R38, R53, R55, R56, R66, R67, R68, R69, R70, R71 +5
180Resistor_SMD:R_0402_1005MetricR20, R22, R24, R25, R31, R34, R39, R41, R42, R43, R44, R47, R49, R50, R52, R57 +2
160.22uFCapacitor_SMD:C_0402_1005MetricC35, C36, C38, C40, C41, C42, C43, C44, C51, C52, C53, C54, C56, C59, C60, C94
14TestPointTestPoint:TestPoint_Pad_D1.0mmTP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP13, TP14, TP15
130.1uFCapacitor_SMD:C_0603_1608MetricC29, C31, C32, C68, C80, C81, C83, C85, C86, C87, C88, C89, C98
120.1uFCapacitor_SMD:C_0402_1005MetricC63, C65, C67, C69, C70, C72, C74, C76, C77, C92, C97, C99
1033.2Resistor_SMD:R_0402_1005MetricR29, R30, R32, R45, R63, R72, R73, R74, R75, R76
9100kResistor_SMD:R_0402_1005MetricR3, R13, R18, R21, R23, R26, R28, R64, R65
810uFCapacitor_SMD:C_0603_1608MetricC7, C11, C12, C19, C23, C24, C34, C91
622uFCapacitor_SMD:C_0603_1608MetricC13, C14, C15, C18, C25, C26
51uFCapacitor_SMD:C_0402_1005MetricC48, C49, C73, C75, C90
5Conn_01x03_SocketConnector_JST:JST_ZE_B03B-ZESK-D_1x03_P1.50mm_VerticalJ2, J4, J6, J7, J8
41uFCapacitor_SMD:C_0603_1608MetricC28, C30, C33, C93
42.2kResistor_SMD:R_0603_1608MetricR11, R46, R61, R79
44.7uFCapacitor_SMD:C_0402_1005MetricC58, C64, C66, C71
4MountingHoleMountingHole:MountingHole_2.7mm_M2.5_DIN965_PadH1, H2, H3, H4
4PMEG3020ERDiode_SMD:Nexperia_CFP3_SOD-123WD1, D2, D6, D8
30Resistor_SMD:R_0603_1608MetricR62, R88, R94
3100kResistor_SMD:R_0603_1608MetricR85, R86, R89
3100uHInductor_SMD:L_0805_2012MetricL2, L3, L5
310uFCapacitor_SMD:C_0805_2012MetricC1, C4, C5
310uFCapacitor_SMD:C_0402_1005MetricC37, C39, C57
34.7kResistor_SMD:R_0402_1005MetricR1, R2, R84
3600@100MHz 0.3AInductor_SMD:L_0603_1608MetricFB5, FB6, FB7
3LED GREENLED_SMD:LED_0603_1608MetricD4, D11, D12
3SSM3K35AMFV_L3FSSM3K35AMFV:VESM_TOS-MQ2, Q3, Q4
20.47uFCapacitor_SMD:C_0603_1608MetricC8, C20
210kResistor_SMD:R_0603_1608MetricR91, R97
210nFCapacitor_SMD:C_0402_1005MetricC61, C62
210pFCapacitor_SMD:C_0402_1005MetricC10, C22
218kResistor_SMD:R_0402_1005MetricR7, R15
21kResistor_SMD:R_0402_1005MetricR37, R60
22.2uFCapacitor_SMD:C_0402_1005MetricC50, C55
22.2uFCapacitor_SMD:C_0603_1608MetricC45, C46
230@100MHz 2.2AInductor_SMD:L_0805_2012MetricFB2, FB4
230@100MHz 4AInductor_SMD:L_0805_2012MetricFB1, FB3
24.7kResistor_SMD:R_0603_1608MetricR10, R78
24.7pFCapacitor_SMD:C_0402_1005MetricC95, C96
24.7uFCapacitor_SMD:C_0805_2012MetricC6, C82
2470nHInductor_SMD:L_0805_2012MetricL1, L4
2470pFCapacitor_SMD:C_0603_1608MetricC9, C21
247uFCapacitor_SMD:CP_Elec_3x5.3C16, C17
25.1kResistor_SMD:R_0402_1005MetricR5, R6
2510Resistor_SMD:R_0402_1005MetricR82, R83
261.9Resistor_SMD:R_0402_1005MetricR48, R51
268kResistor_SMD:R_0402_1005MetricR4, R8
27.87kResistor_SMD:R_0603_1608MetricR90, R98
2750Resistor_SMD:R_0603_1608MetricR87, R95
282.5kResistor_SMD:R_0603_1608MetricR92, R100
28pFCapacitor_SMD:C_0402_1005MetricC78, C79
2LED YELLOWLED_SMD:LED_0603_1608MetricD5, D7
2SW_DPSTButton_Switch_SMD:SW_SPST_PTS810SW1, SW2
2TPS628502DRLRTPS62850x:SOT-5X3-8_DRL_TEXU1, U3
10.047uFCapacitor_SMD:C_0402_1005MetricC47
10.22uFCapacitor_SMD:C_0805_2012MetricC3
10.47uFCapacitor_SMD:C_0805_2012MetricC2
112MHzCrystal:Crystal_SMD_2016-4Pin_2.0x1.6mmY1
11kResistor_SMD:R_0805_2012MetricR54
11kResistor_SMD:R_0603_1608MetricR96
12.2kResistor_SMD:R_0402_1005MetricR40
1220pFCapacitor_SMD:C_0805_2012MetricC84
132V 5AFuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolderF1
1330kResistor_SMD:R_1206_3216MetricR9
140.2kResistor_SMD:R_0402_1005MetricR16
140MHzCrystal:Crystal_SMD_2016-4Pin_2.0x1.6mmY2
147uFCapacitor_SMD:C_0603_1608MetricC27
15.8vDiode_SMD:D_SOD-123FD3
1510Resistor_SMD:R_0603_1608MetricR12
180.6kResistor_SMD:R_0402_1005MetricR14
193LCxxBPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU8
1BSS123Package_TO_SOT_SMD:SOT-23Q1
1Conn_01x06_SocketConnector_JST:JST_ZH_B6B-ZR_1x06_P1.50mm_VerticalJ3
1Conn_01x07_SocketConnector_JST:JST_ZH_B7B-ZR_1x07_P1.50mm_VerticalJ1
1Conn_02x06_Odd_EvenConnector_JST:JST_PUD_B12B-PUDSS_2x06_P2.00mm_VerticalJ9
1FT4232HQFT4232HQ:QFN50P900X900X105-65NU7
1LED REDLED_SMD:LED_0603_1608MetricD10
1MX25R1635FZUIH0MX25R1635FZUIH0:PSON50P200X300X60-9NU12
1NUP2105LPackage_TO_SOT_SMD:SOT-23D9
1SN74LVC1G11DSFRSN74LVC1G11DSFR:SON35P100X100X40-6NU14
1SW_DIP_x04Button_Switch_SMD:SW_DIP_SPSTx04_Slide_6.7x11.72mm_W8.61mm_P2.54mm_LowProfileSW4

The 265 most common of 275 parts.

Similar boards

  • 4 layers90 × 66 mmAudio, the printed circuit board in 3D

    Audio

    AndreasNielsen4000/Group-7-IoT-Project

    The project is a wireless speaker system that can play music from a Bluetooth or WiFi source. The system consists of four main parts with subcomponents:

    162 parts1
  • 4 layers90.8 × 47 mmPickit, the printed circuit board in 3D

    Pickit

    ananevego/ProjectFreeCad

    Конвертер библиотечных footprint-файлов KiCad .kicadmod в самостоятельные библиотеки FreePCB2 .fpl. Написан на Python 3.10+, внешние зависимости не нужны.

    122 parts
  • 6 layers29 × 33 mmMINIREX G4, the printed circuit board in 3D

    MINIREX G4

    mathieupommery/MINIREX_G473

    The following table demonstrates the estimated component costs based on Mouser volume pricing. The unit price of each component dynamically adapts to the total quantity required for the entire production batch (1, 100…

    109 parts10
  • 4 layers105 × 105 mmDev real, the printed circuit board in 3D

    Dev real

    iamdarshg/dev-board

    Self-contained project: board + schematics + libraries. Unzip anywhere and open dev-real.kicadpro in KiCad 9.

    318 parts1
  • 4 layers75 × 50 mmUsb3-gmm7550, the printed circuit board in 3D

    Usb3-gmm7550

    GMM-7550/gmm7550-hardware

    CologneChip GateMate FPGA Module: GMM-7550

    206 parts36
  • 2 layers125.3 × 55.3 mmStm32 can lin, the printed circuit board in 3D

    Stm32 can lin

    trnila/stm32_can_lin

    Set nSWBOOT0 to 0 using STM32CubeProgrammer for the first time, then connect the debugger and flash the device:

    103 parts
  • 8 layers118 × 100 mmKria k26-devboard, the printed circuit board in 3D

    Kria k26-devboard

    antmicro/kria-k26-devboard

    Open source AMD Xilinx Kria UltraScale+ SoM baseboard

    660 parts83Apache-2.0
  • 4 layers44 × 64 mmJTAGProgrammer, the printed circuit board in 3D

    JTAGProgrammer

    anthony-bernaert/ftdi-jtag-programmer

    FTDI-based JTAG Programmer Circuit for FPGAs

    122 parts77CERN-OHL-P-2.0

Questions

How big is the MmWave radarBoard PCB?

It measures 55 × 84.1 mm and has 6 copper layers, 1 mm thick.

What parts does the MmWave radarBoard use?

275 parts, built around the MX25R1635FZUIH0, PMEG3020ER, BSS123 and NUP2105L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MmWave radarBoard KiCad files?

From the EmielV2002/mmWave-radarBoard repository on GitHub, at the commit this page was made from: the board is mmWave-radarBoard/mmWave-radarBoard.kicad_pcb and its schematic mmWave-radarBoard/COM_busses.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the MmWave radarBoard design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).