4 layers61.4 × 75.2 mm
VehicleAccessoryController
EmbeddedDesign/VehicleAccessoryController
Vehicle Dash Cam and Accessory Controller
81 parts
4 layers55 × 44 mm
VehicleAccessoryControllerTestBoard
EmbeddedDesign/VehicleAccessoryControllerVehicle Dash Cam and Accessory Controller
- Size
- 55 × 44 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 54
- Pads
- 168
- Tracks, vias
- 200, 43
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Oct 2019
- Updated
- 13 Jul 2020
Overview
VehicleAccessoryControllerTestBoard is an open-source printed circuit board by EmbeddedDesign, from the EmbeddedDesign/VehicleAccessoryController repository on GitHub. It is a 4-layer board of 55 × 44 mm with 52 parts on 54 nets, routed with 200 tracks and 43 vias.
It is built around the CP2102N-A02-GQFN24, SI8710CC-B-IS and SI8621BB-B-IS, with the TPS3710DSE, BSS138 and SP0503BAHTG among its other parts. Its parts include 21 resistors, 10 capacitors, 6 connectors, 4 ICs and 4 diodes.
Main components
6
CP2102N-A02-GQFN24
QFN-24-EP(4x4)-40℃~+85℃@(Ta) 1.3uA 13.7mA 3V~3.6V USB 2.0 USB to UART QFN-24-EP(4x4) USB Converters ROHSSilicon LabsUSB ConvertersSI8710CC-B-IS
-UncategorisedSilicon Labs
SI8621BB-B-IS
SOIC-8-40℃~+125℃ 1 1 150Mbps 2.5V~5.5V 2.5V~5.5V 2500 50kV/us 8ns Low Level SOIC-8 Digital Isolators ROHSSilicon LabsDigital Isolators
TPS3710DSE
WSON-6(1.5x1.5)-40℃~+125℃ 0ms 1 1.8V~18V 5.3uA Active Low Open-drain Voltage monitor WSON-6(1.5x1.5) Supervisor and Reset ICs ROHSTexas InstrumentsSupervisor And Reset ICs
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
SP0503BAHTG
SOT-143-55℃~+125℃ 10A@8/20us 14V 150W@8/20us 30pF、60pF 5.5V 6V 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.mdVehicleAccessoryController
Vehicle Dash Cam and Accessory Controller
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | VehicleAccessoryController:C_0603 | C804, C805, C807, C809, C811, C812, C813 |
| 5 | 1k | VehicleAccessoryController:R_0603 | R708, R709, R724, R726, R728 |
| 3 | 1M | VehicleAccessoryController:R_0603 | R712, R713, R727 |
| 3 | 22k1 | VehicleAccessoryController:R_0603 | R716, R717, R731 |
| 3 | FID | VehicleAccessoryController:Fiducial | fid1, fid2, fid3 |
| 3 | LED_ALT | VehicleAccessoryController:LED_0603 | D601, D603, D604 |
| 2 | 30k9 | VehicleAccessoryController:R_0603 | R720, R721 |
| 2 | 4.7uF | VehicleAccessoryController:C_0603 | C806, C808 |
| 2 | 90R | VehicleAccessoryController:R_0603 | R729, R730 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q201, Q202 |
| 1 | 0.1nF | VehicleAccessoryController:C_0603 | C810 |
| 1 | 160R | VehicleAccessoryController:R_0603 | R725 |
| 1 | 2M43 | VehicleAccessoryController:R_0603 | R703 |
| 1 | 430R | VehicleAccessoryController:R_0603 | R706 |
| 1 | 47k5 | VehicleAccessoryController:R_0603 | R732 |
| 1 | 49k9 | VehicleAccessoryController:R_0603 | R705 |
| 1 | 84k5 | VehicleAccessoryController:R_0603 | R704 |
| 1 | CP2102N-A02-GQFN24 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U105 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J507 |
| 1 | Conn_01x08_Male | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J508 |
| 1 | Front Conn | VehicleAccessoryController:Keystone_8719 | J502 |
| 1 | Input | VehicleAccessoryController:Keystone_8719 | J501 |
| 1 | ON/OFF | VehicleAccessoryController:C&K_ET_Series_Switch | SW301 |
| 1 | Rear Conn | VehicleAccessoryController:Keystone_8719 | J503 |
| 1 | SI8710CC-B-IS | VehicleAccessoryController:SOIC-8_NB | U104 |
| 1 | SP0503BAHT | Package_TO_SOT_SMD:SOT-143 | D605 |
| 1 | Si8621BB-B-IS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U106 |
| 1 | TPS3710 | VehicleAccessoryController:TI DSE (S-PWSON-N6) | U103 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1 |
| 1 | USB_Mini-B | VehicleAccessoryController:AFCI_10033526_USB-mini | J506 |
More from EmbeddedDesign/VehicleAccessoryController
1Similar boards
- 4 layers60 × 80 mm
- 4 layers49.8 × 46.6 mm
Ricardo BlackBoxNEW
icl-rocketry/Ricardo-JollyRoger
Flight Data Recorder (FDR) for ICLR flight vehicles
87 parts - 2 layers140 × 100 mm
Plts monitoring controller
desvandi/PLTSMonitoring_Firmware-Backend
Integrated to PLTSMonitoring_PWA
152 parts - 4 layers100 × 180 mm
- 2 layers99.4 × 60.4 mm
- 2 layers73 × 99.1 mm
- 2 layers95.3 × 72.4 mm
Rck22
Muriukidavid/reflow_toaster_oven
Design for a home toaster oven reflow based on tinyk22 module
81 parts1 - 4 layers48.5 × 25 mm
Questions
How big is the VehicleAccessoryControllerTestBoard PCB?
It measures 55 × 44 mm and has 4 copper layers, 1.6 mm thick.
What parts does the VehicleAccessoryControllerTestBoard use?
52 parts, built around the CP2102N-A02-GQFN24, SI8710CC-B-IS, SI8621BB-B-IS and TPS3710DSE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the VehicleAccessoryControllerTestBoard KiCad files?
From the EmbeddedDesign/VehicleAccessoryController repository on GitHub, at the commit this page was made from: the board is hardware/VehicleAccessoryControllerTestBoard/VehicleAccessoryControllerTestBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the VehicleAccessoryControllerTestBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask EmbeddedDesign before reusing the design.