

FlawCon 2019 Badge - Designed by the wonderful @TheEnbyperor
- Size
- 73 × 99.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 62
- Nets
- 88
- Pads
- 261
- Tracks, vias
- 853, 105
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 18 Jan 2019
- Updated
- 25 Jan 2019
Overview
Badge is an open-source printed circuit board by FlawCon, from the FlawCon/flawcon_badge repository on GitHub. It is a 2-layer board of 73 × 99.1 mm with 62 parts on 88 nets, routed with 853 tracks and 105 vias.
It is built around the ESP-12F, CAP1296-1-SL and BSS138, with the MBR0530, BC847BPN and SP0503BAHTG among its other parts. Its parts include 18 resistors, 13 capacitors, 7 diodes, 6 ICs and 5 transistors. It belongs with the lEDs and displays boards and the ESP8266 boards of this library.
Main components
6ESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi ModulesCAP1296-1-SL
SOIC-14-40℃~+125℃ 3V~5.5V 50uA 6 750uA 8kV Capacitive Touch、自动灵敏度校准、接近检测 SOIC-14 Touch Sensors ROHSMicrochip TechnologyTouch SensorsBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsMBR0530
SOD-1231 Independent 30V 5.5A 500mA 550mV@500mA 80uA@30V SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky DiodesBC847BPN
SOT-363Bipolar (BJT)GOODWORKSP0503BAHTG
SOT-143-55℃~+125℃ 10A@8/20us 14V 150W@8/20us 30pF、60pF 5.5V 6V 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
Parts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C6, C7, C8, C9, C11 |
| 6 | 10K | Resistor_SMD:R_0402_1005Metric | R3, R4, R5, R6, R7, R13 |
| 6 | Conn_01x01_Female | controls:Banana_THT | 3V3, GND, GP1, GP2, SCL, SDA |
| 4 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 3 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C10, C13, C14 |
| 3 | 470 | Resistor_SMD:R_1206_3216Metric | R14, R17, R18 |
| 3 | LED | LED_SMD:LED_0603_1608Metric_Castellated | D4, D6, D7 |
| 3 | MBR0530 | Diode_SMD:D_SOD-123 | D1, D2, D3 |
| 2 | 12K | Resistor_SMD:R_0402_1005Metric | R15, R16 |
| 2 | 2.2K | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C12 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 2.55K | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | 4.7 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 47uH | Inductor_SMD:L_6.3x6.3_H3 | L1 |
| 1 | BC847BPN | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q5 |
| 1 | Battery_Cell | Connector_JST:JST_XH_S02B-XH-A-1_1x02_P2.50mm_Horizontal | BT1 |
| 1 | CAP1296 | Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.75x2.7mm | U4 |
| 1 | CP2102N-A01-GQFN28_0 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U5 |
| 1 | ESP-12F | RF_Module:ESP-12E | U1 |
| 1 | LM75C | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | LOGO | Controls:controls_f_mask | G*** |
| 1 | LOGO | Controls:controls_f_cu | G*** |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | MDE029A128296RBW | Connector_FFC-FPC:Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal | U2 |
| 1 | Prog | Button_Switch_SMD:SW_SPDT_PCM12 | SW2 |
| 1 | Reset | Button_Switch_SMD:SW_SPST_B3U-3000P | SW1 |
| 1 | SP0503BAHT | Package_TO_SOT_SMD:SOT-143 | D5 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_Amphenol_12401548E4-2A | J1 |
Similar boards
- 2 layers17.3 × 39.3 mm

- 6 layers71.5 × 63.6 mm

Sensorboard
CameraNexus/sitina1
Open-source 35mm full-frame (36mm x 24mm) CCD mirror-less interchangable lens camera (MILC). The original goal of this project was to create a digital camera back to convert SLR cameras to DSLR cameras, but has since…
426 parts82MIT - 2 layers48 × 110 mm

- 2 layers100 × 80 mm

RegB
G-Leonel-6/C2
En este repositorio se guardaran los archivos correspondientes al desarrollo de una fuente de alimentacion regulada
61 parts - 4 layers184.6 × 108.2 mm

- 2 layers70.5 × 20.1 mm

Npn pnp colpitts oscillator
fpga-theremin/theremin
Open source digital FPGA based theremin project
36 parts11 - 4 layers70.2 × 71 mm

C3-27-epaper touch
martinberlin/bistable-smart-switch
An epaper switch project with 2 PCBs, controller+touch, and 220AC to 3DC with Relay (Latch or solid-state)
64 parts32Apache-2.0 - 4 layers91.4 × 88.4 mm

Questions
How big is the Badge PCB?
It measures 73 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Badge use?
62 parts, built around the ESP-12F, CAP1296-1-SL, BSS138 and MBR0530. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Badge KiCad files?
From the FlawCon/flawcon_badge repository on GitHub, at the commit this page was made from: the board is badge/badge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Badge design in my own project?
Its repository states no licence, so its author keeps all rights: ask FlawCon before reusing the design.