
Audio board
EleonoreMizo/pedalevite
Pédale Vite — DIY multi-FX pedalboard for guitar/bass/etc.

Module for the Arduino MEGA to support EP modules
Megamodule is an open-source printed circuit board by Elektropioneer, from the Elektropioneer/MegaAktuatorModule repository on GitHub. It is a 2-layer board of 130.5 × 69.5 mm with 39 parts on 73 nets, routed with 817 tracks and 37 vias.
It is built around the LM7805CT. Its parts include 15 connectors, 6 capacitors, 2 diodes, 1 resistor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Module for the Arduino MEGA to support EP modules
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | Aktuator_Module | Aktuator_Module:Aktuator_Module | M1, M2, M3, M4, M5, M6, M7, M8, M9 |
| 3 | C | Capacitors_SMD:C_0805 | C1, C3, C8 |
| 3 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J8, J9, J10 |
| 3 | CP | Capacitors_SMD:CP_Elec_6.3x4.5 | C2, C4, C7 |
| 2 | Screw_Terminal_1x02 | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2pol | J11, J13 |
| 1 | 5V_AD0 | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | J1 |
| 1 | 5V_AD8 | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | J2 |
| 1 | ARDUINO_MEGA_SHIELD | module_modif:ARDUINO MEGA SHIELD | SHIELD1 |
| 1 | BS107 | TO_SOT_Packages_SMD:TO-252-2Lead | Q1 |
| 1 | CONN_01X03 | Connectors:GS3 | J15 |
| 1 | CONN_01X06 | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.00mm_SMD_Pin1Right | J14 |
| 1 | CONN_02X08 | Pin_Headers:Pin_Header_Straight_2x08_Pitch1.27mm_SMD | J12 |
| 1 | D | Diodes_SMD:D_SMB_Standard | D1 |
| 1 | ENC_M_1 | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | J5 |
| 1 | ENC_M_2 | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | J6 |
| 1 | ENC_M_3 | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | J7 |
| 1 | GND_AD0 | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | J3 |
| 1 | GND_AD8 | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | J4 |
| 1 | LED | LEDs:LED_0805 | D2 |
| 1 | LM7805CT | TO_SOT_Packages_SMD:TO-252-2Lead | U1 |
| 1 | LOGO | Hardware:github_logo | G*** |
| 1 | LOGO | Hardware:EP_Logo_2 | G*** |
| 1 | R | Resistors_SMD:R_0805 | R1 |
| 1 | SW_Push | Buttons_Switches_THT:SW_DIP_x1_W7.62mm_Slide_LowProfile | SW1 |

EleonoreMizo/pedalevite
Pédale Vite — DIY multi-FX pedalboard for guitar/bass/etc.

ThomasVDD/SmartSupply
SmartSupply is a digital battery powered lab powersupply. It is Arduino compatible and can be controlled via PC over USB.

DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.

balmerdx/BalmerDX_VNA
Vector Network Analyzer 10 KHz - 180 MHz


profdc9/ParanoiaBox
A standalone elliptic curve/AES file encryption and decryption device


It measures 130.5 × 69.5 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the LM7805CT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Elektropioneer/MegaAktuatorModule repository on GitHub, at the commit this page was made from: the board is megamodule.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Elektropioneer before reusing the design.