4 layers243.8 × 171.5 mm
2 layers85.1 × 54 mm
Control de luces exterior
ElectronVoltio/Control-luces-exteriores-con-ArduinoProgramas, esquemas y PCB del circuito propuesto
- Size
- 85.1 × 54 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 72
- Pads
- 96
- Tracks, vias
- 104, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 8 Jan 2018
- Updated
- 8 Jan 2018
Overview
Control de luces exterior is an open-source printed circuit board by ElectronVoltio, from the ElectronVoltio/Control-luces-exteriores-con-Arduino repository on GitHub. It is a 2-layer board of 85.1 × 54 mm with 14 parts on 72 nets, routed with 104 tracks and 2 vias.
It is built around the DS1307Z+. Its parts include 6 connectors, 3 resistors, 2 ICs, 1 diode and 1 crystal. It belongs with the ESP8266 boards of this library.
Main components
1README
README.mdControl-luces-exteriores-con-Arduino
Programas, esquemas y PCB del circuito propuesto
Vídeo con el proyecto entero: https://youtu.be/bs5APFfVJ2o
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 4K7 | w_pth_resistors:RC05 | R2, R3 |
| 1 | 1N4007 | w_pth_diodes:diode_do35 | D1 |
| 1 | 32768 | Crystals:Crystal_AT310_d3.0mm_l10.0mm_Horizontal | Y1 |
| 1 | 470 | w_pth_resistors:RC05 | R1 |
| 1 | Analog input | w_pin_strip:pin_socket_8 | J2 |
| 1 | CR2025 3V | w_battery_holders:keystone_103 | BAT1 |
| 1 | Comunicació | w_pin_strip:pin_socket_8 | J6 |
| 1 | DS1307 | dil_8-300_socket | U2 |
| 1 | Desconnexió Serial | Pin_Headers:Pin_Header_Angled_1x04_Pitch2.54mm | J3 |
| 1 | Digital/PWM 1 | w_pin_strip:pin_socket_8 | J5 |
| 1 | Digital/PWM 2 | w_pin_strip:pin_socket_10 | J4 |
| 1 | NodeMCU_ESP12E | NodeMCUESP12ELoLin | U1 |
| 1 | Power | w_pin_strip:pin_socket_8 | J1 |
Similar boards
- 6 layers243.8 × 243.8 mm
Raven
agranlund/raven
Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack
331 parts87 - 2 layers178 × 145 mm
Ultra DB X51 v1
ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards
145 parts70 - 2 layers100 × 100 mm
Mist1010
UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure
273 parts43MIT - 4 layers239.4 × 165.7 mm
- 2 layers101.6 × 147.3 mm
Karabas pro revER
andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers
223 parts37MIT - 6 layers99.5 × 100 mm
Zynq test
cropinghigh/zynq_a9_mb
Zynq 7z010 dev/main board based on components from Antminer S9 control board
528 parts17 - 2 layers191.8 × 48.4 mm
Questions
How big is the Control de luces exterior PCB?
It measures 85.1 × 54 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Control de luces exterior use?
14 parts, built around the DS1307Z+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Control de luces exterior KiCad files?
From the ElectronVoltio/Control-luces-exteriores-con-Arduino repository on GitHub, at the commit this page was made from: the board is Esquema y PCB/Control de luces exterior.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Control de luces exterior design in my own project?
Its repository states no licence, so its author keeps all rights: ask ElectronVoltio before reusing the design.