Skip to the content
2 layers266.7 × 109.5 mmBarghest PCB by Shrimped, the printed circuit board in 3D

Barghest PCB by Shrimped

ElKinoflop/Barghest6

Stacked acrylic handwired keyboard

Size
266.7 × 109.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
139
Nets
89
Pads
764
Tracks, vias
617, 53
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
28 Sep 2024
Updated
31 Dec 2024

Overview

Barghest PCB by Shrimped is an open-source printed circuit board by ElKinoflop, from the ElKinoflop/Barghest repository on GitHub, published under the MIT licence. It is a 2-layer board of 266.7 × 109.5 mm with 139 parts on 89 nets, routed with 617 tracks and 53 vias.

Its parts include 60 diodes, 9 switches, 4 capacitors, 1 IC and 1 connector. It belongs with the keyboards and input boards and the RP2040 and AVR (ATmega, ATtiny) boards of this library.

README

README.md

Barghest Keyboard

Barghest Keyboard Photo

Stacked acrylic keyboard case designed for handwiring with a Waveshare RP2040-Tiny. Iterated from P3D Jake's Hydra Invisibolt case which was designed for MechVault's Hydra PCB. Thanks Jake for allowing me to open source this after I took his Hydra case designed and ruined modified it. Thanks Cain at MechVault for the layout inspiration. If you decide to make one of these then consider donating to Jake's coffee fund.

Feel free to do whatever you want with the files. If you have any questions just ask (Discord username elkinoflop) and if you make one then share a photo with me!

Differences from the original

  • Added F-Row with accents to the side
  • Removed the 'invisibolt' part so there are now visible bolts on the top
  • Added extra foot layer
  • Added cutout to the base to allow a bit more space for handwiring
  • Added mounting points for the daughterboard
  • Slightly reshaped the feet and front edge
  • Only a single (stabless) layout
  • Changed from gasket to bottom mount

Layout

Barghest KLE Image

KLE Raw Data

[{x:0.5},"F1","F2","F3","F4",{x:0.5},"F5","F6","F7","F8",{x:0.5},"F9","F10","F11","F12"], [{y:0.5},"Esc","Q","W","E","R","T",{x:1},"Y","U","I","O","P","Del","Bksp"], [{w:1.25},"Tab","A","S","D","F","G",{x:1},"H","J","K","L","@\n'",{w:1.75},"Enter"], [{w:1.75},"Shift","Z","X","C","V","B",{x:1},"N","M","<\n,",">\n.","Up",{w:1.25},"Shift"], [{x:0.25},"Ctrl","Win","Alt",{x:7.5},"Left","Down","Right"], [{y:-0.75,x:3.5,a:7,w:1.25},"",{w:1.75},"","",{w:1.75},"",{w:1.25},""]

Case Manufacturing

  • Designed to be cut from 3mm acrylic
  • I have included 2 variants of the layers 9 & 10. A standard version for use with a PCB and a handwire/HW version with mounting points for a daughterboard
  • There are multiple versions of the top layer (1) with different accents to the side of the F-Row
  • If you want more space in the case you could double up on one of the layers (I would recommend 4). I didn't do this but depending on how bulky your handwiring is you might find the case tight for space
  • As a rough idea of cost Mechboards.co.uk was the best price I could find in the UK to get the acrylic cut at around £65-£75 depending on what acrylic you choose
Barghest Case Layers

Bill of Materials

  • One of each DXF file (except for the plate) cut from 3mm acrylic.
  • Plate DXF file cut from 1.5mm metal/carbon. Plastic is not suggested as it will be too flexy and your switches will probably pop out
  • A single 8-9mm thick silicone rubber foot/bumpon or similar. Even with a stiffer plate it will still sag in the middle when built handwired. Extra mounting points could be added to fix this but I had already got a plate cut! This Bumpon is stuck to the under side of the plate (between the B and N keys) to support the plate. If a PCB is used this shouldn't be required. Amazon rubber feet
  • Waveshare RP2040-Tiny
  • M2 Standoffs with a outside diameter of 3mm. 16, 8 and 6mm lengths. Amazon Standoffs
  • M2 Hex socket button head bolts. 5, 6 and 8mm lengths. AliExpress bolts
  • M2 Washers. To go under the bolt heads that hold the daughterboard in. These might not be required. AliExpress M2 0.5mm thickness plastic washers
  • M2 nuts to hold the daughterboard. Included with the standoffs linked above
  • Adhesive feet
  • Optional - WS2812B LEDs. There's enough pins on the controller to add some RGB if you want
  • Wire! Solid core 22 AWG suggested
  • Optional - Headers (right angle, single row, 2.54mm pin pitch) and dupont wires so the controller can easily be unplugged if required. The Pi Hut Dupont wires
  • 60x MX Switches
  • 60x 1N4148 Diodes

Firmware

I used POG to create KMK firmware. POG makes creating firmware super simple but I might learn how to create QMK/VIAL firmware at some point! I have included my firmware files (generated by POG).

If you have wired up the matrix and connected it to the same controller pins as I have then you should be able to use my firmware. Install Circuit Python onto the controller first and then copy all the unzipped files from 'firmware' onto the drive.

Handwired Matrix

This is how I handwired the Matrix. Excuse the poor soldering (and out of focus photo), it was my first attempt at handwiring. The second photo shows the controller and LEDs wired up too. I used dupont wires and soldered headers to the controller so they can easily be removed. Barghest Handiwired Matrix Barghest Handiwired Complete

Case Assembly

If you find some of the standoffs tight to push through don't force them. Use a small round file if you need to slightly widen any holes. The small round file from Draper 'Soft Grip Needle File Set, 140mm (6 Piece) (83982)' is the perfect size. Barghest Keyboard Photo

PCB

There is a PCB by ShrimpedKeyboard that uses an external pro micro style RP2040 controller. This PCB is untested.

Parts

139
QtyValueFootprintReferences
60DDiode_SMD:D_SOD-123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +44
53MX_SW_HSPCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1uMX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23 +37
4100nFCapacitor_SMD:C_0402_1005MetricC24, C25, C26, C27
4MX_SW_HSPCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1.75uMX38, MX39, MX60, MX62
4MX_stabPCM_marbastlib-mx:STAB_MX_3uS4, S5, S9, S13
3MX_SW_HSPCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1.25uMX27, MX58, MX64
3MX_SW_HSScottoKeebs_MX:MX_PCB_1.00uMX24, MX26, MX49
2RotaryEncoder_SwitchPCM_marbastlib-various:ROT_Alps_EC11E-SwitchSW1, SW2
1ARGBConnector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_VerticalJ1
1MX_SW_HSScottoKeebs_MX:MX_PCB_1.25uMX51
1MX_stabPCM_marbastlib-mx:STAB_MX_2uS12
1MX_stabPCM_marbastlib-mx:STAB_MX_P_7uS10
1MX_stabPCM_marbastlib-mx:STAB_MX_2.25uS11
1RP2040_Pro_MicroScottoKeebs_MCU:RP2040_Pro_Micro_FlippedU1

Similar boards

  • 2 layers6.3 × 81.7 mmSam sung, the printed circuit board in 3D

    Sam sung

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    139 parts915
  • 2 layers228 × 98 mmPlaid, the printed circuit board in 3D

    Plaid

    hsgw/plaid

    12x4 ortholinear usb keyboard made by Through Hole components ONLY.

    139 parts779MIT
  • 2 layers245.1 × 160 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-64x4-Home-Computer

    My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

    139 parts326
  • 2 layers179.5 × 122.6 mmAvalanche hotswap, the printed circuit board in 3D

    Avalanche hotswap

    vlkv/avalanche

    The Avalanche keyboard is an ergonomic split keyboard with 4x6 (or 3x6 if you break off the 'digits' row) column staggered keys, 5 thumb keys, 1 additional key for the pinky (break off-able too) and 2 additional keys…

    139 parts184
  • 2 layers192.4 × 50 mmRemote, the printed circuit board in 3D

    Remote

    OMOTE-Community/OMOTE-Hardware

    Open Source Remote - Hardware

    139 parts157GPL-3.0
  • 2 layers313.9 × 119.4 mmDissatisfaction-65, the printed circuit board in 3D

    Dissatisfaction-65

    Nicell/Dissatisfaction-65

    A 65% QMK Bluetooth keyboard with an OLED and encoder

    139 parts86MIT
  • 2 layers89.5 × 62.2 mmModule do, the printed circuit board in 3D

    Module do

    andreili/STM32-PLC

    The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.

    139 parts69GPL-3.0
  • 2 layers107.4 × 34.6 mmSk801-rgb, the printed circuit board in 3D

    Sk801-rgb

    mirdej/synkie

    The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann

    139 parts47

Questions

How big is the Barghest PCB by Shrimped PCB?

It measures 266.7 × 109.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Barghest PCB by Shrimped use?

139 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Barghest PCB by Shrimped KiCad files?

From the ElKinoflop/Barghest repository on GitHub, at the commit this page was made from: the board is PCB/Barghest PCB by Shrimped.kicad_pcb and its schematic PCB/Barghest PCB by Shrimped.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Barghest PCB by Shrimped design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).