

VictorMainController
- Size
- 59.1 × 52.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 79
- Pads
- 263
- Tracks, vias
- 354, 80
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 10 Sep 2023
- Updated
- 10 Sep 2023
Overview
VictorMainController is an open-source printed circuit board by Eeshwar-Krishnan, from the Eeshwar-Krishnan/UMAutonomyPCB2023 repository on GitHub. It is a 4-layer board of 59.1 × 52.1 mm with 82 parts on 79 nets, routed with 354 tracks and 80 vias.
It is built around the AMS1117-3.3, SN74LVC1G14DBV and USBLC6-2P6, with the RCLAMP0521P-N, SS310 and 0458002.DR among its other parts. Its parts include 19 capacitors, 17 connectors, 16 diodes, 15 resistors and 5 ICs. It belongs with the STM32 boards of this library.
Main components
9AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSN74LVC1G14DBV
SOT-23-5-40℃~+85℃ 1 1 1.16V~3.33V 1.65V~5.5V 10uA 2.3V 32mA 32mA 390mV~1.87V 550mV 6.5ns@2.5V,50pF 74LVC Schmitt trigger 电源关断保护、噪声抑制功能 SOT-23-5 Inverters ROHSTexas InstrumentsInvertersUSBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)RCLAMP0521P-N
DFN1006-20.4pF 16V 3.5A@8/20us 500nA 5V 60W@8/20us 6V Bidirectional IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Single-channel TVS DFN1006-2 ESD and Surge Protection (TVS/ESD) ROHSBORNESD And Surge Protection (TVS/ESD)SS310
SMA(DO-214AC)-55℃~+150℃ 100V 3A 50uA@100V 80A 850mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHShongjiachengSchottky Diodes0458002.DR
1206-55℃~+125℃ 0.952 1.6mm 2A 3.2mm 48V 50A 75V Surface Mount Fuse 1206 Disposable fuses ROHSLittelfuseDisposable FusesBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsSMAJ75CA
DO-214AC(SMA)-55℃~+150℃ 121V 3.3A 3.3uA 390pF 400W@10/1000us 75V 83.3V Bidirectional TVS DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHSYFWESD And Surge Protection (TVS/ESD)X50328MSB2GI
SMD5032-2P-40℃~+85℃ 20pF 80Ω 8MHz Crystal Oscillator ±10ppm ±20ppm SMD5032-2P Crystals ROHSYXCCrystals
Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | Conn_01x01_Pin | ReduxCoderLib:SOLDERPAD_150x250 | J1, J3, J4, J5, J6, J7, J8, J9, J10, J11, J13, J14, J15, J16, J17 |
| 9 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C12, C13, C14, C15, C16 |
| 9 | RCLAMP0521P-N | Diode_SMD:D_0402_1005Metric | D4, D5, D6, D7, D8, D9, D10, D11, D16 |
| 6 | 47u | Capacitor_SMD:C_0603_1608Metric | C6, C7, C8, C9, C10, C11 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R4, R7, R13 |
| 2 | 20pf | Capacitor_SMD:C_0603_1608Metric | C17, C18 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R9, R10 |
| 2 | 68.1 | Resistor_SMD:R_0603_1608Metric | R12, R15 |
| 2 | SS310 | Diode_SMD:D_SMA | D2, D14 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2, JP3 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C19 |
| 1 | 0458002.DR | AutonomyLib:0458002.DR | F1 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 1180 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 137 | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 15u | AutonomyLib:IND_BOURNS_SDR1307 | L1 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | 30900 | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 3V3Good | LED_SMD:LED_0603_1608Metric | D12 |
| 1 | 40.2k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 5VGood | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | 64.9k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J12 |
| 1 | G5V-2 | Relay_THT:Relay_DPDT_Omron_G5V-2 | K1 |
| 1 | LED_Small | LED_SMD:LED_0603_1608Metric | D15 |
| 1 | NRST | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | PLMR38020FDDAR | AutonomyLib:DDA0008E-IPC_A | U1 |
| 1 | SMAJ75CA | Diode_SMD:D_SMA | D1 |
| 1 | SN74LVC1G14DBV | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | STM32G431CBUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U3 |
| 1 | Status1 | LED_SMD:LED_0603_1608Metric | D13 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_2.5x2.5mm | TP1 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U5 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J2 |
| 1 | X50328MSB2GI | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
Similar boards
- 2 layers119 × 92 mm

- 2 layers

- 2 layers27.8 × 61.2 mm

STM32 Devboard
tsk04/STM32-development-board
KiCad schematic and PCB layout for an STM32 devboard
39 parts - 4 layers109 × 155.5 mm

Supercap
Twisted-Fields/acorn-robot-electronics
PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.
198 parts81 - 2 layers68.3 × 47.1 mm

USB C Power Supply
lalithk06/PCB_Designs
This repository contains various PCB design projects made using KiCad
61 parts - 2 layers50 × 66 mm

- 2 layers112 × 57 mm

Caravansensor
MartinVerges/womolin-waterlevel
DIY project to build a smart fuel sensor for RVs or in other projects. It is based on air pressure and is able to measure fresh water as well as grey and black water levels with high precision.
226 parts17 - 2 layers15 × 65.7 mm

Questions
How big is the VictorMainController PCB?
It measures 59.1 × 52.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the VictorMainController use?
82 parts, built around the AMS1117-3.3, SN74LVC1G14DBV, USBLC6-2P6 and RCLAMP0521P-N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the VictorMainController KiCad files?
From the Eeshwar-Krishnan/UMAutonomyPCB2023 repository on GitHub, at the commit this page was made from: the board is PCBs /VictorMainController/VictorMainController.kicad_pcb and its schematic PCBs /VictorMainController/LevelShifter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the VictorMainController design in my own project?
Its repository states no licence, so its author keeps all rights: ask Eeshwar-Krishnan before reusing the design.