
Attenuverter v1
EchelonForce/triple_attenuverter
A Eurorack attenuater module based on the Befaco dual attenuverter.

A Eurorack attenuater module based on the Befaco dual attenuverter.
Attenuverter v1 panelized is an open-source printed circuit board by EchelonForce, from the EchelonForce/triple_attenuverter repository on GitHub. It is a 2-layer board of 76 × 100 mm with 122 parts on 40 nets, routed with 528 tracks and 4 vias.
It is built around the TL072. Its parts include 48 resistors, 28 capacitors, 14 connectors, 6 ICs and 4 diodes. It belongs with the audio and music boards of this library.
This is an attenuverter (attenuate, invert, offset) module for Eurorack synthesizers.
Full write up here: https://www.robotdialogs.com/2022/09/eurorack-triple-attenuverter.html
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R3, R4, R4, R7, R7, R11, R11, R15, R15, R17, R17, R18, R18, R22, R22 +2 |
| 18 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R2, R10, R10, R12, R12, R16, R16, R19, R19, R100, R100, R101, R101, R102, R102 +2 |
| 12 | 100k | My Stuff:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_w_3d | ATEN1, ATEN1, ATEN2, ATEN2, ATEN3, ATEN3, OFFSET1, OFFSET1, OFFSET2, OFFSET2, OFFSET3, OFFSET3 |
| 12 | 10nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C100, C100, C101, C101, C102, C102, C103, C103, C104, C104, C105, C105 |
| 12 | 10pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C2, C3, C3, C6, C6, C7, C7, C8, C8, C9, C9 |
| 12 | AudioJack2_SwitchT | My Stuff:Jack_3.5mm_MJ-355W_and_PJ398SM_Vertical | J2, J2, J3, J3, J4, J4, J5, J5, J6, J6, J7, J7 |
| 6 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8, R8, R14, R14, R21, R21 |
| 6 | 47k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6, R6, R13, R13, R20, R20 |
| 6 | TL072 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U1, U1, U2, U2, U3, U3 |
| 4 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C4, C4, C5, C5 |
| 4 | D | Diode_THT:D_A-405_P2.54mm_Vertical_KathodeUp | D1, D1, D2, D2 |
| 4 | FerriteBead | Inductor_THT:L_Axial_L6.6mm_D2.7mm_P2.54mm_Vertical_Vishay_IM-2 | FB1, FB1, FB2, FB2 |
| 2 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J8, J8 |
| 2 | Logo_Open_Hardware_Small | Symbol:OSHW-Symbol_6.7x6mm_SilkScreen | LOGO100, LOGO100 |
| 2 | logo1 | My Stuff:Logo2 | LOGO101, LOGO101 |
| 2 | logo1 | My Stuff:Logo1 | LOGO102, LOGO102 |

EchelonForce/triple_attenuverter
A Eurorack attenuater module based on the Befaco dual attenuverter.

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

ctag-fh-kiel/ctag-tbd
CTAG TBD >>to be determined<< an extendible open source Eurorack sound module

plinkysynth/plinky_public
a public release of the plinky sw and hw



matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules

StoneRose35/cortexguitarfx
guitar effects processor implemented on various arm cortex platforms
It measures 76 × 100 mm and has 2 copper layers, 1.6 mm thick.
122 parts, built around the TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the EchelonForce/triple_attenuverter repository on GitHub, at the commit this page was made from: the board is attenuverter_v1/attenuverter_v1_panelized.kicad_pcb and its schematic attenuverter_v1/attenuverter_block.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask EchelonForce before reusing the design.