2 layers146 × 110 mm
Useless box 2025
ENACRobotique/elec
Dépôt des cartes électroniques de l'équipe ENAC Robotique
108 parts2
2 layers93 × 146 mm
Panelized pompe sap
ENACRobotique/elec2Dépôt des cartes électroniques de l'équipe ENAC Robotique
- Size
- 93 × 146 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 306
- Nets
- 140
- Pads
- 578
- Tracks, vias
- 752, 92
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Sep 2017
- Updated
- 12 Feb 2026
Overview
Panelized pompe sap is an open-source printed circuit board by ENACRobotique, from the ENACRobotique/elec repository on GitHub. It is a 2-layer board of 93 × 146 mm with 306 parts on 140 nets, routed with 752 tracks and 92 vias.
Its parts include 20 capacitors, 16 resistors, 16 ICs, 8 transistors and 8 connectors. It belongs with the STM32 boards of this library.
Parts
306| Qty | Value | Footprint | References |
|---|---|---|---|
| 204 | NPTH | NPTH | KiKit_MB_10_1, KiKit_MB_10_2, KiKit_MB_10_3, KiKit_MB_10_4, KiKit_MB_10_5, KiKit_MB_10_6, KiKit_MB_10_7, KiKit_MB_11_1, KiKit_MB_11_2, KiKit_MB_11_3, KiKit_MB_11_4, KiKit_MB_11_5, KiKit_MB_11_6, KiKit_MB_11_7, KiKit_MB_12_1, KiKit_MB_12_2 +188 |
| 8 | 100K | Resistor_SMD:R_0603_1608Metric | R4, R4, R4, R4, R5, R5, R5, R5 |
| 8 | 100n | Capacitor_SMD:C_0603_1608Metric | C4, C4, C4, C4, C5, C5, C5, C5 |
| 8 | IRLML6344 (modèle du 6244) | Package_TO_SOT_SMD:SOT-23 | Q1, Q1, Q1, Q1, Q2, Q2, Q2, Q2 |
| 4 | 22-03-5035 | ENAC_robotique:SHDR3W70P0X250_1X3_990X490X590P | J2, J2, J2, J2 |
| 4 | 390 | Resistor_SMD:R_0603_1608Metric | R2, R2, R2, R2 |
| 4 | 3V3_TP | TestPoint:TestPoint_Pad_D1.0mm | TP4, TP4, TP4, TP4 |
| 4 | 4U7 | Capacitor_SMD:C_0603_1608Metric | C3, C3, C3, C3 |
| 4 | BOOT0_TP | TestPoint:TestPoint_Pad_D1.0mm | TP5, TP5, TP5, TP5 |
| 4 | C 1uf | Capacitor_SMD:C_0805_2012Metric | C1, C1, C1, C1 |
| 4 | C 1uf | Capacitor_SMD:C_0603_1608Metric | C2, C2, C2, C2 |
| 4 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J1, J1, J1 |
| 4 | INA180A1 | Package_TO_SOT_SMD:SOT-23-5 | U3, U3, U3, U3 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D1, D1, D1, D1 |
| 4 | NCP718xSN120 | Package_TO_SOT_SMD:SOT-23-5 | U2, U2, U2, U2 |
| 4 | NRST_TP | TestPoint:TestPoint_Pad_D1.0mm | TP3, TP3, TP3, TP3 |
| 4 | Rsens | Resistor_SMD:R_0603_1608Metric | R1, R1, R1, R1 |
| 4 | STM32L432KCUx | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U4, U4, U4, U4 |
| 4 | SWDCLK_TP | TestPoint:TestPoint_Pad_D1.0mm | TP2, TP2, TP2, TP2 |
| 4 | SWDIO_TP | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP1, TP1, TP1 |
| 4 | U1_RX | TestPoint:TestPoint_Pad_D1.0mm | TP7, TP7, TP7, TP7 |
| 4 | U1_TX | TestPoint:TestPoint_Pad_D1.0mm | TP6, TP6, TP6, TP6 |
| 4 | ~ | ENAC_robotique:pompe | U1, U1, U1, U1 |
The 304 most common of 306 parts.
More from ENACRobotique/elec
12- 2 layers75 × 69 mm
- 2 layers150 × 100 mm
CartePrincipaleRobot
ENACRobotique/elec
Dépôt des cartes électroniques de l'équipe ENAC Robotique
52 parts2 - 2 layers69 × 76 mm
Principal2019 elec
ENACRobotique/elec
Dépôt des cartes électroniques de l'équipe ENAC Robotique
43 parts2 - 2 layers52 × 66 mm
- 2 layers68 × 86 mm
- 2 layers87 × 78 mm
- 2 layers100 × 100 mm
CartePrincipaleR1
ENACRobotique/elec
Dépôt des cartes électroniques de l'équipe ENAC Robotique
27 parts2 - 2 layers54 × 51 mm
- 2 layers
- 2 layers70 × 75 mm
Max3232id breakout
ENACRobotique/elec
Dépôt des cartes électroniques de l'équipe ENAC Robotique
23 parts2 - 2 layers19 × 19 mm
Similar boards
- 2 layers150.1 × 66.9 mm
- 2 layers200 × 164.9 mm
Order4 notent
nEDM-TUM/Temperature-Sensor-System
System for reading/writing temperature sensors
306 parts - 2 layers100 × 210 mm
PEC 16 V0.2
papaya/MB_ModulBox_NG
MBModulBoxNG est une bibliothèque de cartes de contrôle physiques pour le système MIDIbox NG. Les sources, schémas, PCB et fichiers de fabrication ne sont pas tous disponibles pour chaque carte.
305 parts - 2 layers86 × 99 mm
- 2 layers232.1 × 165.7 mm
- 2 layers197 × 102 mm
BoneIO - dimmer LED board 46x5A v0.1
boneIO-eu/Community-boards
BoneIO Community boards
305 parts2GPL-3.0 - 2 layers490.5 × 144.1 mm
Largelad
Hyphen-ated/large-lad-keyboard
Keyboard design with 148 keys. You can build it yourself.
305 parts4 - 2 layers143 × 97 mm
Pihat all
yope/kamaq
Python/Cython implementation of 3D printer firmware running on Linux
305 parts11GPL-2.0
Questions
How big is the Panelized pompe sap PCB?
It measures 93 × 146 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Panelized pompe sap use?
306 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panelized pompe sap KiCad files?
From the ENACRobotique/elec repository on GitHub, at the commit this page was made from: the board is 2026/pompe_sap/panelized_pompe_sap.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panelized pompe sap design in my own project?
Its repository states no licence, so its author keeps all rights: ask ENACRobotique before reusing the design.