Skip to the content
2 layers48.3 × 66 mmTemp Module, the printed circuit board in 3D

Tennessee Tech ECE 4961 Capstone Project Autonomous Crawlspace Inspection Robot

Size
48.3 × 66 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
33
Pads
63
Tracks, vias
18, 0
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
2 May 2022
Updated
5 Dec 2022

Overview

Temp Module is an open-source printed circuit board by ECE-4961-Capstone-Team-1-Spring-Fall-22, from the ECE-4961-Capstone-Team-1-Spring-Fall-22/Autonomous-Crawlspace-Inspection-Robot repository on GitHub, published under the MIT licence. It is a 2-layer board of 48.3 × 66 mm with 14 parts on 33 nets, routed with 18 tracks and 0 vias.

Its parts include 2 ICs and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

README.md

Autonomous-Crawlspace-Inspection-Robot

This GitHub contains all relevant files used during development. For a comprehensive guide to the repository set up see the bottom of the document.

Executive Summary

Crawl spaces grant convenient access to the plumbing, duct work, and electrical wiring of a house, but they often present unique dangers to maintenance professionals and residents alike. Exposure to harsh breathing conditions, hanging obstacles, uncomfortable working positions, and even animals can cause non-ideal conditions. This capstone project will focus on the design and assembly of a robot prototype that can perform these inspections autonomously. The end product will be an autonomous, mobile robot that can be left unattended in a crawlspace by an inspector. It will navigate through the space, create a map and model of the space, compile an image of the entire crawlspace ceiling, and collect sensor data. This sensor data will include humidity, temperature, and wood moisture content.

Current Robot Capabilities

The first iteration of the project focused on setting up the hardware systems. Sensors, microcontrollers, motors, and power circuits were designed and implemented as part of a larger multi-group project. The following details the current capabilities of the robot.

  • Low-level autonomy which allows the robot to navigate through an enclosed area
  • Creating a map of the area using the SLAM algorithm
  • Take pictures throughout an area and stitch simple areas into a singular, larger image
  • Collect humidity, temperature, and moisture content data and overlay information on images
  • Supply power for consistent operation across all components
  • Robot movement through serial commands and return encoder data to the main microcontroller
  • Manual control through text-based commands while also streaming live video to the operator

For more detail on current designs, see files in sub-system directories

Salient Outcomes

Although this project includes lofty long-term goals, many exceptional systems were able to be incorporated in the first iteration of the project.

  • The mapping was found to be accurate to 93% or more in each test that was run. While this is useful information for an inspector to have, it will also provide an invaluable framework for future updates to the autonomy
  • Power was successfully applied to all parts of the system with no over-currents or under-voltages experienced by the system. All back EMF from the motors was successfully filtered out as well.
  • Environmental sensing was found to be exceptionally accurate. Temperature and Humidity were both found to be 96% accurate or greater while moisture content was successfully measured to within 2.5% moisture.

Pictures and Videos

The final system demo in the crawlspace can be found here

A picture of the final system can also be found below

alt text

Who Are We? Mr. Jesse Robert's ECE 4961 Capstone Team 1

  • James (Jim) Camp - Senior Electrical Engineering Major, Mechatronics Concentration - Environmental Sensor Subsystem Developer - Delegator

  • John-Caleb (JC) Williams - Senior Electrical Engineering Major, Electromagnetics Concentration - Navigation Subsystem Developer - Treasurer

  • John Harris - Senior Electrical Engineering Major, Controls Concentration - Power Subsystem Developer - Secretary

  • Joseph Thomas - Senior Electrical Engineering Major, Power Concentration - Movement Subsystem Developer - Social

  • Mr. Jesse Roberts - Professor and Faculty Advisor

  • Project Stakeholders - This project was developed for anyone who needs to inspect their crawlspace. This includes homeowners, building inspectors, and renovators. The system is also a great solution for anyone experiencing issues with mold or unsafe crawlspace conditions.

Repo Guide

This repository contains the entirety of the Autonomous Crawlspace Inspection Robot’s REV1 design files. The folder breakdown is as follows

  • Design Files – Contains files that represent the final design state of the project. This is made up of an overall system schematic and the bill of materials (BOM).
  • Documentation – Contains all written submissions created throughout both semesters of the course. Also included are the presentations used at the end of the project.
  • Environmental Sensing – This subsystem is responsible for the data collection which occurs throughout the crawlspace. Additionally, image stitching is also included within this folder.
  • Movement – This subsystem is responsible for controlling the physical motion and positioning of the robot.
  • Navigation – This system handles the mapping and autonomy. Interfacing with the Raspberry Pi, LIDAR, distance sensors, and remote access are also included in this subsystem.
  • Pictures and Videos – A repository for all the pictures and videos taken throughout the experimentation and testing.
  • Power - This subsystem is responsible for providing continuous power to all the components. Circuit protection and power filtering are also integrated into this subsystem.

Parts

14
QtyValueFootprintReferences
4, , ,
3SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mmJP1, JP2, JP3
1Arduino_Nano_v2.xModule:Arduino_Nano_WithMountingHolesU1
1Conn_01x02_FemaleConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1MCP9808_DFNPackage_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.7x1.4mmU2

The 10 most common of 14 parts.

More from ECE-4961-Capstone-Team-1-Spring-Fall-22/Autonomous-Crawlspace-Inspection-Robot

2
  • 2 layers48.3 × 66 mmMC Probe, the printed circuit board in 3D

    MC Probe

    ECE-4961-Capstone-Team-1-Spring-Fall-22/Autonomous-Crawlspace-Inspection-Robot

    Tennessee Tech ECE 4961 Capstone Project Autonomous Crawlspace Inspection Robot

    29 parts10MIT
  • 2 layers48.3 × 66 mmHumidity Module, the printed circuit board in 3D

    Humidity Module

    ECE-4961-Capstone-Team-1-Spring-Fall-22/Autonomous-Crawlspace-Inspection-Robot

    Tennessee Tech ECE 4961 Capstone Project Autonomous Crawlspace Inspection Robot

    11 parts10MIT

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the Temp Module PCB?

It measures 48.3 × 66 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Temp Module use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Temp Module KiCad files?

From the ECE-4961-Capstone-Team-1-Spring-Fall-22/Autonomous-Crawlspace-Inspection-Robot repository on GitHub, at the commit this page was made from: the board is Environmental Sensing/Temperature_PCB/Temp_Module/Temp_Module.kicad_pcb and its schematic Environmental Sensing/Humidity_PCB/Humidity_Module/Humidity_Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Temp Module design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).