4 layers60 × 28 mm
2 layers57 × 54 mm
Tag connect hat
Duckle29/tag-connect-hat1A RPi hat for the Tag-connect TC2030-MCP programming cable
- Size
- 57 × 54 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 47
- Pads
- 120
- Tracks, vias
- 254, 38
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 2 Aug 2018
- Updated
- 2 Aug 2018
Overview
Tag connect hat is an open-source printed circuit board by Duckle29, from the Duckle29/tag-connect-hat repository on GitHub. It is a 2-layer board of 57 × 54 mm with 30 parts on 47 nets, routed with 254 tracks and 38 vias.
It is built around the 74LVC2T45DC. Its parts include 6 capacitors, 3 ICs, 3 connectors, 2 resistors and 2 diodes.
Main components
1README
readme.mdTag connect hat
A hat for a Rasperry Pi, for programming ISP targets with the TC2030-MCP cable
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6 |
| 6 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6 |
| 3 | 74LVC2T45DC | Package_SO:VSSOP-8_2.4x2.1mm_P0.5mm | U1, U2, U3 |
| 2 | 220R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2 |
| 1 | Button | Button_Switch_Keyboard:SW_Cherry_MX1A_1.50u_PCB | SW1 |
| 1 | Green | LED_THT:LED_D5.0mm_Clear | D2 |
| 1 | LOGO | graphics:kiwi | G*** |
| 1 | OLED | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J1 |
| 1 | RJ12_Shielded | Connector_RJ:RJ12_Amphenol_54601 | J3 |
| 1 | Raspberry_Pi_2_3 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J2 |
| 1 | Red | LED_THT:LED_D5.0mm_Clear | D1 |
The 24 most common of 30 parts.
Similar boards
- 4 layers53 × 42 mm
MioLink
Misaka0x2730/MioLink
ARM JTAG/SWD debugger (BlackMagic port) based on RP2040.
117 parts30GPL-3.0 - 2 layers46.2 × 83 mm
PregnantLaserMouse
Board-Folk/PregnantLaserMouse
A optical mouse replacement pcb for the Amiga pregnant mouse
28 parts21 - 2 layers57.9 × 39.9 mm
MCU Link MR
ErichStyger/MCU-Link-MR
Open Source MCU-Link CMSIS-DAP Debug probe for mobile robots (e.g. Pixhawk)
121 parts20MIT - 6 layers200 × 75 mm
- 4 layers50 × 35.5 mm
- 4 layers165.6 × 125.5 mm
SparkPNT GNSSDO Plus panelized
sparkfun/SparkFun_GNSSDO
The SparkFun GNSS Disciplined Oscillator (GNSSDO / GNSSDO+) is a precision time and frequency reference based on the Septentrio mosaic-T GNSS receiver.
478 parts6 - 4 layers43.2 × 48.8 mm
DAC peripherals
DamienMorlier/ScanProcessingFPGA
Copyright (c) 2023 Damien Morlier Lin Yudong Morgan Adamsson Samuel Svensson Matteo Rodriguez Derek Holzer
35 parts4MIT
Questions
How big is the Tag connect hat PCB?
It measures 57 × 54 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tag connect hat use?
30 parts, built around the 74LVC2T45DC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tag connect hat KiCad files?
From the Duckle29/tag-connect-hat repository on GitHub, at the commit this page was made from: the board is tag-connect-hat.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tag connect hat design in my own project?
Its repository states no licence, so its author keeps all rights: ask Duckle29 before reusing the design.