2 layers27.5 × 11.5 mm
Simplefet
Duckle29/simple_fet
Just a simple fet board (for solenoids in this case, but meh)
9 partsBSD-3-Clause
2 layers82.5 × 103.5 mm
Simple fet panel
Duckle29/simple_fetJust a simple fet board (for solenoids in this case, but meh)
- Size
- 82.5 × 103.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 243
- Nets
- 5
- Pads
- 513
- Tracks, vias
- 1,080, 54
- Pours
- 54
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Nov 2019
- Updated
- 29 Nov 2019
Overview
Simple fet panel is an open-source printed circuit board by Duckle29, from the Duckle29/simple_fet repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 82.5 × 103.5 mm with 243 parts on 5 nets, routed with 1,080 tracks and 54 vias.
Its parts include 108 connectors, 54 resistors, 27 diodes and 27 transistors.
README
readme.mdDuckles generic PCB template
This is a sample readme for a kicad project
Parts
243| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2 +11 |
| 27 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1 +11 |
| 27 | ? | Diode_SMD:D_SMA-SMB_Universal_Handsoldering | D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1 +11 |
| 27 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4 +11 |
| 27 | Conn_01x03 | Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2 +11 |
| 27 | LOGO | graphics:kiwi10mm | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** +11 |
| 27 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1 +11 |
| 27 | Solenoid | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1 +11 |
| 27 | Solenoid | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3 +11 |
More from Duckle29/simple_fet
1Similar boards
- 2 layers285 × 95 mm
- 2 layers135.9 × 123.4 mm
Left main
UltimateHackingKeyboard/uhk60v1-electronics
The schematic and PCBs of the UHK 60 v1
243 parts177GPL-3.0 - 2 layers329.2 × 131.1 mm
- 2 layers225.5 × 185.2 mm
Levels
Good-Great-Grand-Wonderful/levels54
Levels54 is for people who care about how things are made and how they feel. Every component—from ceramic trackball bearings to stainless switch plates—is chosen to deliver smooth, precise, durable performance.
243 parts67MIT - 2 layers344.7 × 123.6 mm
- 2 layers437.9 × 148.2 mm
- 2 layers196.9 × 114.3 mm
CobraPin v1 00
cobra18t/CobraPin
Pinball Controller based on OPP and designed for use with MPF
243 parts17GPL-3.0 - 2 layers170 × 170 mm
Questions
How big is the Simple fet panel PCB?
It measures 82.5 × 103.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Simple fet panel use?
243 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Simple fet panel KiCad files?
From the Duckle29/simple_fet repository on GitHub, at the commit this page was made from: the board is panel/simple_fet_panel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Simple fet panel design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).