2 layers25 × 15 mm
2 layers44.5 × 46.4 mm
Usb tester
Disasm/usb-tester1- Size
- 44.5 × 46.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 56
- Pads
- 176
- Tracks, vias
- 479, 17
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Feb 2020
- Updated
- 24 May 2020
Overview
Usb tester is an open-source printed circuit board by Disasm, from the Disasm/usb-tester repository on GitHub. It is a 2-layer board of 44.5 × 46.4 mm with 22 parts on 56 nets, routed with 479 tracks and 17 vias.
It is built around the 74HC4514D, FSUSB30MUX and USBLC6-2SC6. Its parts include 14 connectors, 4 resistors and 4 ICs.
Main components
3
74HC4514D
SO-24-300mil-40℃~+125℃ 22ns@6V,50pF 2V~6V 5.2mA 5.2mA 74HC 8uA Decoder Single Supply SO-24-300mil Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches, Multiplexers, Decoders
FSUSB30MUX
MSOP-10-40℃~+85℃ 12ns 13ns 250ps 2:1 3V~4.3V 6.5pF 6.5Ω 720MHz MSOP-10 Analog Switches, Multiplexers ROHSonsemiAnalog Switches, Multiplexers
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
README
README.mdusb-tester
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R2, R3, R4 |
| 1 | 74HC4514D | Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm | U5 |
| 1 | Comm | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | J11 |
| 1 | CommLA | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | J12 |
| 1 | FSUSB30MUX | Package_SO:MSOP-10_3x3mm_P0.5mm | U4 |
| 1 | Idd | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J15 |
| 1 | STMPS2151STR | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | TARGET | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |
| 1 | Target | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J14 |
| 1 | Target 0 | unsorted:PinSocket_2x05_P2.54mm_Vertical_Reversed | J2 |
| 1 | Target 1 | unsorted:PinSocket_2x05_P2.54mm_Vertical_Reversed | J3 |
| 1 | Target 2 | unsorted:PinSocket_2x05_P2.54mm_Vertical_Reversed | J4 |
| 1 | Target 3 | unsorted:PinSocket_2x05_P2.54mm_Vertical_Reversed | J5 |
| 1 | Target 4 | unsorted:PinSocket_2x05_P2.54mm_Vertical_Reversed | J6 |
| 1 | Target 5 | unsorted:PinSocket_2x05_P2.54mm_Vertical_Reversed | J7 |
| 1 | Target 6 | unsorted:PinSocket_2x05_P2.54mm_Vertical_Reversed | J8 |
| 1 | Target 7 | unsorted:PinSocket_2x05_P2.54mm_Vertical_Reversed | J9 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | Upstream | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J13 |
More from Disasm/usb-tester
2- 2 layers25 × 13 mm
Similar boards
- 4 layers106.6 × 77 mm
- 2 layers313.9 × 119.4 mm
Dissatisfaction-65
Nicell/Dissatisfaction-65
A 65% QMK Bluetooth keyboard with an OLED and encoder
139 parts86MIT - 2 layers313.9 × 119.4 mm
CMKC65 R1
thomasdevine01/cmkc-keyboard
Chico State Mechanical Keyboard Club's Keyboard and Firmware Design
141 parts2MIT - 4 layers220 × 200 mm
Quadrant
etiennechlt/electronic-chess
Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.
347 parts - 4 layers228.6 × 110.7 mm
Driver test
thewonderidiot/lachesis
Portable, safe readers for Apollo Guidance Computer core rope memory modules
225 parts4MIT - 4 layers200 × 50 mm
- 2 layers66 × 50 mm
- 4 layers120 × 120 mm
Yellow
NabuCasa/yellow
Home Assistant Yellow - hardware for Home Assistant which grows with your needs.
322 parts116
Questions
How big is the Usb tester PCB?
It measures 44.5 × 46.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Usb tester use?
22 parts, built around the 74HC4514D, FSUSB30MUX and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Usb tester KiCad files?
From the Disasm/usb-tester repository on GitHub, at the commit this page was made from: the board is hardware/usb-tester.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Usb tester design in my own project?
Its repository states no licence, so its author keeps all rights: ask Disasm before reusing the design.