

LipoCharger
This project is a custom-designed Lithium Polymer battery charging and protection circuit with a regulated 5V output.
- Size
- 36.3 × 36 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 30
- Pads
- 114
- Tracks, vias
- 97, 26
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 6 May 2025
- Updated
- 3 Jul 2025
Overview
LipoCharger is an open-source printed circuit board by DevinJM3, from the DevinJM3/Lipo-Charger-Board repository on GitHub, published under the MIT licence. It is a 4-layer board of 36.3 × 36 mm with 35 parts on 30 nets, routed with 97 tracks and 26 vias.
It is built around the MT3608, FM2113 and TP4056-42-ESOP8, with the MBR230LSFT1G, SI2300A and S2B-XH-A among its other parts. Its parts include 10 resistors, 7 capacitors, 5 diodes, 3 ICs and 3 transistors.
Main components
7MT3608
SOT-23-6-40℃~+85℃ 1 1.2MHz 100uA、1.6mA 2A 2V~24V Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHS西安航天民芯DC-DC ConvertersFM2113
SOT-23-6-40℃~+85℃ 1 1.5V~8V 2.8V 3uA Lithium Battery Not supported Protection IC Support SOT-23-6 Battery Management ROHSShenzhen Fuman ElecBattery Protection ICsTP4056-42-ESOP8
ESOP-8-40℃~+85℃ 1 1A 2uA 4.2V 4V~8V Charging IC Lithium Battery Support ESOP-8 Battery Management ROHSTOPPOWERBattery ManagementMBR230LSFT1G
SOD-123FL-55℃~+125℃ 1 Independent 1mA@30V 2A 400mV 40A 40V SOD-123FL Schottky Diodes ROHSTokmasSchottky DiodesSI2300A
SOT-23-55℃~+150℃ 1 N-channel 1.25W 1V 20V 21mΩ@4.5V 574pF 60pF 6A 7.7nC@4.5V 70pF N-Channel SOT-23 MOSFETs ROHSUMWMOSFETsS2B-XH-A
弯插,P=2.5mm-25℃~+85℃ 1 11.5mm 1x2P 2 2.5mm 250V 2P 3A 6.1mm 7.4mm Brass K Pin PA66 Right Angle Tin UL94V-0 White XH 弯插,P=2.5mm Wire To Board Connector ROHSJSTWire To Board ConnectorSK12D07VG4
插件-25℃~+70℃ 5,000 cycles 500mA 50V 8.8mm PC Pin Rectangular Columnar Right Angle SPDT 插件 Slide Switches ROHSSHOU HANSlide Switches
README
README.mdLiPo Charger & Protection Board with 5V Output
PLACEHOLDER FOR IMAGE
Overview
This project is a custom-designed Lithium Polymer battery charging and protection circuit with a regulated 5V output. Perfect for powering your portable electronics projects, this board offers a complete power management solution in a compact form factor.
Features
- LiPo Battery Charging: Safe charging circuit for single-cell LiPo batteries
- Battery Protection: Overcharge, over-discharge, and short-circuit protection
- 5V Regulated Output: Clean, stable 5V output regardless of battery voltage
- Compact Design: Minimized footprint for easy integration into projects
- Status Indicators: LED indicators for charging/full charge
- USB Input: Standard USB-C connector for charging and power input
Technical Specifications
- Input Voltage: 5V DC via USB
- Battery: Single-cell 3.7V Lithium Polymer
- Charging Current: 500mA (configurable)
- Output Voltage: 5V ±0.1V
- Maximum Output Current: 2A continuous
- Protection Features:
- Overcharge cutoff: 4.2V
- Over-discharge cutoff: 2.8V
- Short-circuit protection
PCB Details
- Dimensions: XX mm × XX mm
- Layers: 2-layer PCB
- Designed with: KiCad 9.0
Getting Started
Bill of Materials
| Designator | Footprint | Quantity | Value | LCSC Part # |
|---|---|---|---|---|
| C1, C2 | 0603 | 2 | 10uF | C19702 |
| C3 | 0603 | 1 | 0.1uF | C14663 |
| C4, C5 | 0603 | 2 | 22uF | C59461 |
| D1 | 0603 | 1 | RED | C965799 |
| D2 | 0603 | 1 | GREEN | C19171301 |
| D3 | D_SMA-SMB_Universal_Handsoldering | 1 | SS34 | C908680 |
| D4, D5 | D_SMA-SMB_Universal_Handsoldering | 2 | B340A | C85098 |
| D6 | Nexperia_CFP3_SOD-123W | 1 | 5.1v | C19077401 |
| J1 | JST_S2B-XH-A | 1 | S2B-XH-A | C157931 |
| J2 | Usb-C | 1 | USB_C_USB2.0_14P | C2988369 |
| L1 | WE-PD2_1054 | 1 | 22uH | C436465 |
| Q1, Q2 | SOT-23_Handsoldering | 2 | SI2300A | C347480 |
| R1, R5 | 0603 | 2 | 2k | C2907022 |
| R10 | 0603 | 1 | 73.2k | C2933257 |
| R11, R7 | 0603 | 2 | 10k | C98220 |
| R2, R3 | 0603 | 2 | 1k | C103198 |
| R4 | 0603 | 1 | 100 | C3016239 |
| R6 | 0603 | 1 | 0.4 | C5126047 |
| R8, R9 | 0603 | 2 | 5.1k | C3016319 |
| SW1 | SlideSwitch | 1 | SK12D07VG4 | C393937 |
| U1 | SOIC-8 | 1 | TP4056-42-ESOP8 | C725790 |
| U2 | SOT-23-6 | 1 | MT3608 | C84817 |
| U3 | TSOT-23-6_HandSoldering | 1 | FM2113 | C2832124 |
Usage
- Connect a LiPo battery to the BAT+ and BAT- terminals
- Power the board via the USB connector
- Connect your load to the 5V and GND output terminals
- The charging indicator LED will illuminate red during charging and turn green when complete
License
This project is released under the MIT License.
Contributing
Contributions to improve the design are welcome! Please feel free to submit issues or pull requests.
Contact
If you have any questions or suggestions about this project, please open an issue on GitHub or contact me at Devin.Marx3@gmail.com.
This is my first KiCad project! I appreciate any feedback or suggestions for improvement.
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 22uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C5, C8 |
| 3 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C6, C7 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 2 | 2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R5 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 2 | MBR230LSFT1G | Diode_SMD:D_SOD-123 | D3, D4 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | GND_OUT1, PWR_OUT1 |
| 2 | SI2300A | Package_TO_SOT_SMD:TSOT-23_HandSoldering | Q1, Q2 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 10uH | a_Library:HY0630-100M-M | L1 |
| 1 | 11k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 5.1v | Diode_SMD:Nexperia_CFP3_SOD-123W | D6 |
| 1 | 82k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | FM2113 | Package_TO_SOT_SMD:TSOT-23-6_HandSoldering | U3 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | HL 2305A | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q3 |
| 1 | LOGO | a_Library:PCB Logo (12.5x17) | Devin M. |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | RED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | S2B-XH-A | a_Library:JST_S2B-XH-A | J1 |
| 1 | SK12D07VG4 | a_Library:SK12D07VG4 - (SlideSwitch) | SW1 |
| 1 | TP4056-42-ESOP8 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U1 |
| 1 | USB_C_Receptacle_USB2.0_14P | a_Library:Usb-C | J2 |
Similar boards
- 2 layers43 × 43 mm

- 4 layers83 × 83 mm

Blinkekatze
TobleMiner/blinkekatze
Blinkekatze, a replacement PCB to turn cat themed night-lights into interactive light displays
134 parts34 - 4 layers64 × 77 mm

OBSPro
FabianSchwartau/OBSPro
Version of the OpenBikeSensor hardware optimized for PCBA
131 parts3LGPL-2.1 - 2 layers60 × 150 mm

Phone
TheEinfachFelix/CampPhone
Warum habe ich mich dagegen entschieden, das Sim Modul selber zu implementieren? Ich habe kein Chip gefunden, der günstiger als das fertige Modul war, und ein Datenblatt in Englischer Sprache hat.
137 parts - 2 layers120 × 67 mm

Silvia pid board
haydenridd/silvia-pid-board
The following outlines: - Board circuit design - Hookup/wiring guide - Board mounting - BOM/Fabrication info
39 parts10MIT - 4 layers100 × 100 mm

- 2 layers73.5 × 40.5 mm

- 4 layers100 × 100 mm

Questions
How big is the LipoCharger PCB?
It measures 36.3 × 36 mm and has 4 copper layers, 1.6 mm thick.
What parts does the LipoCharger use?
35 parts, built around the MT3608, FM2113, TP4056-42-ESOP8 and MBR230LSFT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LipoCharger KiCad files?
From the DevinJM3/Lipo-Charger-Board repository on GitHub, at the commit this page was made from: the board is LipoCharger.kicad_pcb and its schematic LipoCharger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LipoCharger design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).